MATRIXSYNTH: Industrial Music Electronics


Showing posts with label Industrial Music Electronics. Show all posts
Showing posts with label Industrial Music Electronics. Show all posts

Sunday, January 21, 2024

TYME SEFARI MKII: THE SUSTAINER


video upload by Robotopsy Robotopsy

"TYME SEFARI MKII: THE SUSTAINER
by ROBOTOPSY

SUSTAINER INGREDIENTS

1- Fill the Buffer & Memory
2- Play – Activated
3- Send wave table signal like the KERMIT MK3 to the DIRECTION INPUT
4- Using an OFFSETTER like the QOTILE is Preferable
5- Balance between Signal Freq, Amp, SHAPE & OFFSET is the KEY
6- *Optional: Process Audio Output of TS MK2 to add colors
7- Load Memory for variations

Un souvenir qui me poursuit"

Monday, January 08, 2024

The Zorlon Cannon | Dark Atari 2600 Tone Generation | The Harvestman | IME


video upload by Nostalgic Ruckus

"This module is pretty special. To give an idea of what is going on I tried to make it simple. In all of these patches the top mixer is the sound and the bottom mixer is the gates. The bottom mixer is firing gates that are triggering all four envelopes separately as an envelope or in burst mode on Quadrax. The top mixer outs are going into vcas. That is where the sound is coming from. There are four sounds in total coming from the mixer. When I say mixers I am talking about the outputs on the Zorlon Cannon. Quadrax is then modulating the vcas. Something to note. Quadrax when in burst mode (yellow lights) till the cycle ends it will block any of the gates incoming from the Zorlon Cannon till it ends its cycle. Think of it like a ping pong ball bouncing. It will not accept gates from the Zorlon Cannon till the final 'bounce'. This is why at first it may look like some of the gates are not matching up with the envelopes.

Probably the most fun I have had in modular in awhile. Up there with Mito and Dial up from Moffenzeef Modular as far as the fun factor."

Thursday, January 04, 2024

"Taming The Harvestman" | Industrial Music Electronics


video upload by Nostalgic Ruckus

"Finding the hidden tones and textures within the FM. Everything here was found by accident off camera. When it felt right I turned on the camera to capture. Here are a few of those moments."

Tuesday, November 21, 2023

Preset DEEP DIVE : Hertz Donut - Bionic Lester - Piston Honda - Kermit mkIII


video upload by Robotopsy Robotopsy

"100th Video !!
DEEP DIVE into the preset manager of INDUSTRIAL MUSIC ELECTRONICS
Hertz Donut - Bionic Lester - Piston Honda - Kermit
Quick Tips and patch ideas around the preset system and how to push the limits beyond simple preset recall. How do you use to system? What's your favorite patch? What's your worst? Share your thoughts. If you want to hear to patches without the annoying voices and animations, [see below]

0:00 Intro
0:57 Dr. Teddy Ruxpin
2:06 Global Basics
3:00 Preset Hardware
3:42 Preset Navigation & Saving Function
9:19 Hertz Donut Selected
9:32 PA01:HDmk3 Random Basics
13:48 PA02:HDmk3 Random FM
15:28 PA03:HDmk3 Random Percussion
18:08 PA04:HDmk3 Random Amp Mod
21:17 Tips01 HDmk3 Deep Settings
23:00 PA05:HDmk3 CV+Att Fold Settings
26:25 PA06:HDmk3 Trig Forward 01
27:50 PA07:HDmk3 Trig Forward 02
29:43 PA08:HDmk3 CV + Offset
34:16 PA09:HDmk3 CV+Offset DELUXE
36:19 PA10:HDmk3 Dual HD Morphing
39:03 PA11:HDmk3 Dual HD RNDM
41:10 PA12:HDmk3 Dual HD Ext Processing
43:51 PA13:HDmk3 Dual HD RNDM Ext & Sync
45:58 PA14:HDmk3 Dual HD DELUXE 2000
48:42 Power Acquired & Module Select
49:06 Bionic Lester Introduction
51:39 PA15:BLmk3 CV Offset Formant 01
53:16 PA16:BLmk3 Reload Presets (Formant02)
54:32 PA17:BLmk3 RNDM for Fast Presets
56:49 PA18:BLmk3 Preset Scope
59:37 PA19:BLmk3 Panning
1:01:45 PA20:BLmk3 Crossfader
1:04:09 PA21:BLmk3 Switch Destination
1:06:40 PA22:BLmk3 CV Amount & Link Mode
1:09:40 PA23:BLmk3 BLmk3 as VCA
1:11:19 PA24:BLmk3 Sync Mahem
1:13:44 PA25:BLmk3 Env as Audio Source
1:16:08 PA26:BLmk3 Ratcheting
1:18:57 PA27:BLmk3 Trigs as Audio Sources
1:20:18 PA28:BLmk3 Feedback Mayhem
1:23:01 Power Acquired & Module Select
1:23:24 Piston Honda Introduction
1:25:57 PA29:PHmk3 Randomize Fast Presets
1:29:52 PA30:PHmk3 Randomize Waves Only
1:31:50 PA31:PHmk3 Randomize Freq Modulation
1:43:20 PA32:PHmk3 Trig Offset Parameter Lock
1:39:03 PA33:PHmk3 Trig Offset 8 Presets x2 = 16
1:40:56 PA34:PHmk3 Trig Offset FM’ish Amount
1:42:39 PA35:PHmk3 Trig Offset Stereo Waveshaper
1:44:56 PA36:PHmk3 CV Offset Shaping Trigs
1:46:18 PA37:PHmk3 CV Att CV Offset Shaping Env
1:48:40 PA38:PHmk3 Trig Random Shaping Gates
1:50:40 PA39:PHmk3 CV Offset Shaping CV
1:53:51 PA40:PHmk3 Trig Random Amp Modulation
1:57:30 PA41:PHmk3 CV Offset S&H Clock Source
2:02:29 PA42:PHmk3 CV Offset Sync & FM Feedback
2:06:44 Power Acquired & Module Select
2:09:37 Perfect Combo Module
2:12:44 Tips02:Kmk3 Shortcut with preset button
2:13:37 PA43:Kmk3 Evaluator Randomizator
2:14:55 PA44 Trig Offset Parameter Lock
2:19:20 PA45:HD&BLmk3 Trig Offset Parameter Lock
2:23:25 PA46:Kmk3 Trig Random Fast Presets
2:29:23 Tips03:Kmk3 Bonus CV Input 01
2:31:28 PA47:Kmk3 Bonus CV Input 02
2:34:15 PA48:Kmk3 C&D Splitted Control
2:36:19 PA49:Kmk3 Trig Offset Progression
2:40:33 PA50:Kmk3 CV Offset Master Clocking
2:44:48 Tips04:Kmk3 Preset Scope Color Indicator
2:45:26 PA51:Kmk3 Trig Random Preset Scope
2:48:32 PA52:Kmk3 Trig Random Self Randomize
2:50:22 PA53:Kmk3 Trig Random Dual Randomize
2:53:02 PA54:Kmk3 CV Morph Tripple FM
2:55:32 PA55:Kmk3 CV Offset Level Control
2:58:11 PA56:Kmk3 CV Offset Preset Recall
2:59:55 Almighty57:Kmk3 CV Offset 24 Vox Drone
3:02:43 PA58:Kmk3 Trig RNDM 7th Revelation
3:05:56 Power Acquired and Ending
3:08:28 Thanks Credits

INDUSTRIAL MUSIC ELECTRONICS
http://www.industrialmusicelectronics..."

DEEP DIVE Patch Only NO TALKING

video upload by Robotopsy Robotopsy

"No Talking.... just the patches."

Wednesday, November 01, 2023

Make Noise Retires the Shared System


Tony Talks Shared System | Make Noise video upload by MAKEN0ISE

"As we begin to ship the final production run of the Black & Gold Shared System Plus, Tony sits down to reminisce on its origins and history, and also to answer your Shared System questions from our various social media channels!

Three of the five Shared System Series artists host the records digitally on their Bandcamp pages:

https://richarddevine.bandcamp.com/al...
https://cortini.bandcamp.com/album/ma...
https://surachai.bandcamp.com/album/m...

https://www.makenoisemusic.com/synthe..."

Update:

Press release follows, including a pic of the original Shared System followed by the black and gold.


"After more than a decade of production, the Shared System is being retired, with its final run currently shipping to dealers worldwide.

The Shared System was originally designed in 2012 as a self-contained instrument which was mailed to artists to create music for the Shared System series of 7” records on Make Noise Records. The Shared System was then officially released after the records later in 2012, updated in 2015 as the Black & Gold Shared System and again in 2017 as the Black & Gold Shared System Plus.

The Shared System is the deepest and most complex of our systems, bringing together many of our synthesis techniques into one system. From analog FM to voltage controlled granularization, the Shared System goes to more sound destinations than most folks have time to travel to in a single lifetime. While this marks the end for the Shared System’s production, the instrument will provide an endless source of inspiration for years to come. As always, we cannot wait to hear what you create with yours!

To commemorate the Shared System’s retirement, we have posted a new video to our YouTube channel ('Tony Talks Shared System'), in which Make Noise founder Tony Rolando sits down to reminisce on the origins and history of the Shared System.

While the original Shared System records are long out of print, three of the five Shared System Series artists currently host their Make Noise Records releases digitally on their Bandcamp pages and can be heard via the links below:

https://richarddevine.bandcamp.com/album/creature-ep
https://cortini.bandcamp.com/album/make-noise-shared-system-002
https://surachai.bandcamp.com/album/mnr005-shared-system-series"

Thursday, September 07, 2023

Curiosity • Loopman Error Instruments • Kermit MK3 • XPO • Resonate • Crave • Sample Drum


video upload by murratti 127

"Lemon
Instruo Scion • Øchd, Industrial Music Kermit Mk3, Loopman Error Instruments • Make Noise Tape & Microsound Machine • XPO • 0-CTRL, erica synths black sequencer • sample drum, stmix befaco, after later audio Resonate, noise engineering melotus Versio • Roucha Legio"

Tuesday, September 05, 2023

SHIMMER


video upload by murratti 127

bass drum • mosaic alan , pique, morcom, enigma • after later audio
roucha legio, yester versio • noise engineering
switch 4 • joranalogue
Boundary • schlappi engineering
kermit mk3 • industrial music
mimeophone, maths • make noise
night rider, M185, vector wave • ryk
passive LPG • intellijel
motion MTR • molten modular
Hope you like this video! Comments welcome!

Tuesday, August 29, 2023

Rainy day with Loopman


video upload by murratti 127

"Black Sequencer from erica synths controls the bass drum from mosaic, the pique from after later audio, the kermit from industrial music and chainsaw from acid rain. 0-CTRL from make noise controls the resonate from after later audio, this signal is filtered with night rider from ryk and the mimeophone is used as an effect. Other effects and voices from the Benjolin v2 from after later audio. Roucha legio and yester versio from noise engineering.

My voice from the Loopman controlled with math and soundhack with morphagene from make noise. Hope you like this video! Comments welcome!"

Sunday, August 13, 2023

Modular Techno Workout 002 | Oxi One, Piston Honda Mk3, Erica Synths Bassline, Roland TR8-S


video upload by Slava Soloma

"Got the Oxi One yesterday...a neat little Sequencer. Just getting to know it better. Definitely a keeper"

Monday, July 31, 2023

Piston Honda MK3 Videos by The Mephitif

br>video uploads by The Mephitif

Playlist:

1.Piston Honda MK3 Video 2
Second time visiting the Industrial Music Electronics Piston Honda MK3, this time with an emphasis on the softer sounding things. This is a raw video with no prior knowledge of the wave banks, just an attempt to look at some of the various wave-sets with an emphasis on the unison voice features. VERY BORING.
2. Industrial Music Electronics Piston Honda MK3
Playing around with the presets, FM amount, and xyz axis of the Industrial Music Electronics Piston Honda MK3 for the first time. Sorry for the crappy cell phone video.
3. Harvestman Piston Honda MK2 Feedback
The Piston Honda MK2 being fed into it's FM input via VCA 1 of the Double Andore MK 2 a mix of it's own output, and the outputs of the Hertz Donut MK2 and both oscillators of the Kermit. Topped with some heavy verb.

Wednesday, July 12, 2023

Kermit Mk3 and his friends


video upload by murratti 127

"completely self-running

Echeveria gibbiflora plays the scion,
Instruo Scion • Øchd, Industrial Music Kermit Mk3, Make Noise Tape & Microsound Machine • XPO • 0-CTRL, erica synths black sequencer • sample drum, stmix befaco, after later audio Resonate • Benjolin V2, noise engineering melotus Versio • Roucha Legio, cre8audio EastBeast, Rolant aira T8."

Monday, May 15, 2023

Superbooth 2023: Industrial Music Electronics - Stilson Hammer MK3 and More


video upload by sonicstate

"At Superbooth 2023, we spoke to the legend that is Scott Jaeger from Industrial Music Electronics (formerly Harvestman) about the new products he has on display. First up is the Stilson Hammer Mark III, a redesigned version of the Mark II sequencer with improved reliability and added features such as gate buttons for each track, extra gate or CV outputs per track, and an OLED display. The Mark III also boasts an improved quantizer, the ability to back up sequences to SD card, and an enhanced song mode and preset chaining. Jaeger explains that the OLED display provides immediate feedback of the internal memory states and helps with chaining patterns into a song, allowing for more powerful performance gestures and individualized style of playing.

Jaeger also demonstrated the Andre Jr., a VCA-based analog low-pass gate circuit with a dual digital envelope generator that can be modulated to develop the dynamics of a sequence through careful modulation of the envelope's velocity. However, the most significant module on display is the Volkmire's Inferno, a granular synthesizer that can load WAV files from an SD card or record from a live input. With independent pitch and playback speed control, the grain generation can be further modified with various parameters such as density and turbidity, providing a unique and customizable sound. The prototype also features a diffuser effect with a feedback loop, assignable CV inputs, trigger inputs for transport control, and a stereo spread control. Industrial Music Electronics is hoping to produce these prototypes by the end of the year.

More info: http://www.industrialmusicelectronics..."

Saturday, March 11, 2023

Malgorithm mk1 : EXPANDER


video upload by

"Using ULN2803A for CV translation.
Switches can be activated by Voltage Control."

Monday, December 26, 2022

Moog DFAM vs Mother 32


video upload by Jarkko Tuohimaa

"Short modular sequences with Moog Mother 32 and DFAM percussion synthesizer. Some additional eurorack modules to spice up the jam. Supercritical Demon core oscillator, The Harvestman Malgorithm..."

Friday, December 16, 2022

Kermit Kompare : Short Audio Demo


video upload by Robotopsy Robotopsy

"Komparing both versions of the Kermit, Dual (mk1) & Quad (mk3) modulation aid from Industrial Music Electronics. Attempt to demonstrate some interesting audio explorations."

Sunday, October 23, 2022

Noise United of LANORAIE


video upload by Robotopsy Robotopsy

"A little experimental journey with my friend PLURMK."

Sunday, September 25, 2022

REJECTED:02 Kermit MKIII 2nd Session


video upload by Robotopsy Robotopsy

"Better to share than to thrash away.
Short Sessions with the KERMIT MKIII.
Testing unpredictable signals."

Sunday, September 18, 2022

REJECTED:01 Kermit MKIII Sessions


video upload by Robotopsy Robotopsy

"Short Sessions with the KERMIT MKIII.
Testing unpredictable signals."

Wednesday, August 17, 2022

Three Body Jam


video upload by Synth Diy Guy

"My first day playing with the new Three Body module by Schlappi Engineering!
An FPGA based triple oscillator with creative normalizations that make it a great experimental electronic music module all on it's own! I'm using a bit of modulation from the Kermit and some reverb from Monsoon.

My Patreon: https://www.patreon.com/quincas My Site: https://www.quincasmoreira.com/

Stay Noisy!"

Live annotated eurorack emotional cinematic synthwave, ARP-2600, Moog, OB-6 Tangerine Dream inspired


video upload by EthanJamesMusic

"This is a live cinematic synthwave electronic music performance inspired by later Tangerine Dream music, where I wanted to setup a more meditative environment and create a slow musical progression by interweaving layers with the Eurorack, using the electric bass as a guitar type of instrument, providing bass from the Moog Grandmother, chords from the DSI OB-6, and texture from the ARP-2600, and more texture from the Buchla 208c Easel Command. This is an entirely live and unrehearsed improvised performance, and I included annotations to show some of what I'm thinking about and also to demonstrate the different musical themes weaving in and out of the texture Since I'm a film composer by trade, this came out relatively cinematic and would work in certain movie score settings. This is a very simple setup to make a big sound. I hope this is educational for you as well, in terms of how I put these performances together. Hopefully this camera angle also helps you learn something!

Patch Notes:
Eurorack:
Stillson Hammer running at x6 multiply but using 1:1 gate from 0-ctrl to make bass. Two envelopes, one to VCA, one to filter.
Tempi clock divider running two channels of Make Noise René. First channel is to Dixie II oscillator to Jove filter to Erberverb. Second is to Serge NTO to Serge VQVCF to Echophon. I'm using a x4 clock divider to the Y channel, which is 1:1 to the VCA gate, but I'm using the C channel gate to the filter, which creates an interesting rhythm.

Moog Grandmother:
Normalled patch

ARP-2600:
3 oscillators tuned in octaves.

DFAM:
Pitch to Noise volume to create snare.

OB-6:
Polysaw chord setting"
NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH