After Later Audio - Bartender V2 and Mixing Ecosystem

video upload by Steve Turner

"This video explains how to connect the Bartender V2, Barback V2, Outs, Bal Outs, Insert and Sends.

You can read my long form blog article about the ALA mixing ecosystem here:

https://steveturner.com.au/news/blog/..."

Stairs Stereo Ladder Filter by After Later Audio || Full Walkthrough and Demo

video upload by Robots Are Red

00:00 - Opening
00:41 - Walkthrough
06:55 - Does it Ping?
07:19 - East Coast Patch
13:10 - West Coast Patch
17:54 - Drums

Check with dealers on the right for availability. See the announcement post here.

RoaF Modular - Welcome | Generative Modular Synth Ambient

video upload by ChiaroBen

"Played some more with the ALA Monsoon this time - a drone from Moog Mavis is recorded into Monsoon after some wavefolding, and then put through some heavy reverb. A heavily (self-)modulated Maths is opening the VCA channel. The melody comes from ALA Beehive into the Void algorithm from TTA Zverb, while the aux out goes through ALA Benjolin (with the filter being modulated bei Benjolin's Rungler) and into pico DSP's delay.
The v/oct from ALA Steps quantized by Shakmat Bard Quartet, with the harmonies switched by RitS QUA through Noise Engineering Vice Verga. I used the trigger input on the Beehive for the first time, with the ochd expander providing the triggers.

Remember - music is powerful.

This music is published under a Creative Commons license. You may use samples, cover, and transform parts or the entirety of it without my explicit consent, as long as you credit me and release your work under a Creative Commons license as well. Commercial use is allowed. But don't just reupload this untransformed.

Thank you."

FFS with a Kick

video upload by After Later Audio

"For Fuzz Sake gets fully exercised with a kick loop."

After Later Audio Stairs - Stereo Ladder Filter Eurorack Module

video upload by After Later Audio

"A single triangle wave pattern played through Stairs. Learn about the bias knob and how it interacts with the cutoff and resonance."

"Our first ladder filter, and it's in stereo. You'll get HP, BP. LP2, and LP4 outputs for each side. Please read below on the HP and BP outputs as they are a bit temperamental.

Along with all of the great traditional sounds of a ladder filter, we've added a bias knob which starves ladder transistors of bias current. This can create some fun detuning, glitchy, and warbly sounds. It sounds best with the resonance turned up a bit. Turning the bias will mess with the cutoff frequency and resonance settings so it takes some knob tweaking to master it. There is decent volt/octave tracking for about 3 octaves.

The HP and BP are possible due to pole mixing. When combined with the level control and the resonance it can lead to some atypical behaviors. So keeping the resonance low and you'll need to manage the level control to get a typical HP and BP responses."

Check with dealers on the right for availability.

ALA Case Expander How-To

video upload by After Later Audio

"Using our expansion set to convert the lid into another powered rack."

FFS - For Fuzz Sake (Super Fuzz Face!) || By After Later Audio

video upload by Robots Are Red

"FFS is based on the famed Fuzz Face guitar pedal, but with extremely broken out controls for both the Germanium and Silicon sections of the Fuzz.

Jump to any section here:
00:00 - Opening
00:43 - Overview
02:24 - Deep Demo
08:25 - Self Oscillation
10:50 - Rings through FFS
17:57 - Drums through FFS
24:15 - Moog Style Patch through FFS
26:41 - Guitar through FFS
32:41 - Some Music"

"Two fuzz channels based on the fuzz face circuit with a built-in pickup simulator.

Gnarly is a 7 knob beast that will destroy whatever you throw at it. It has many dead zones in the pots that will adjust based on the position of other pots. It's all about finding the sweet spots and living on those fine edges. The transistor pairs on this section are replaceable.

Oomph is a 5 knob bass friendly take on the fuzz face and compliments the upper harmonics of the Gnarly section. Pickup simulator - Fuzz circuits offer unique sound when paired with the inductance of the pickup coils in a guitar. This why it is often suggested to have fuzz pedals as your first in a pedal chain. So we've built-in a coil to simulate your eurorack signal being emitted by a guitar pickup. We've also included a pickup simulator output so you can use it to interface with other fuzz instruments (pedals, modules, etc.). As an added oddness - you can also input your guitar into the pickup sim output (just don't plug anything into the normal input). This will still get you Eurorack level output. Please don't input Eurorack levels into the pickup sim output.

Tips - Experiment with the pickup simulator and buffered signal. Use the PS.Level to keep the signal low, borderline on cutting out. You find lots of joy in the gnarly section by keeping this level at the edge."

Substance - Live Psy-Doombient Industrial Synth Drone - TTSH & Eurorack

video upload by Abre Ojos

"75bpm Psy-Doombient Industrial Synth Drone TechNoise Ritual
Live hardware jam with TTSH (ARP2600) and Eurorack modular

Eurorack Modular

Endorphins Queen of Pentacles
ALA Atom
Erica Synths Dual Filter
Doepfer Joystick
Benjolin
Pams New Workout
Monsoon in OliVerb mode

Video processed live through Resolume

Shot with GH5 MKII

Dark ambient audiovisual stuff: https://abreojos.net"

After Later Audio Benjolin V2

video upload by Synthguru

"After Later Audio Benjolin V2
just a little live take of this mighty Eurorack module!
Reverb and Delay added"

Eurorack Performance Mixer Techniques // After Later Audio Nightlife Mixer Series (Bartender & more)

video upload by DivKid

"Join me for lots of patches going from the basics of mixing techniques (applicable to audio in general, but specifically Eurorack modular synthesizers) through to more advanced audio routing and creative options for audio processing.

While this video is a demo on the Nightlife Mixer Series from After Later Audio (Eurorack modules, Bartender, Barback, Cast Iron, Mingles, USB 2 Channel Interface & the SEND VCA) the techniques are applicable to lots of modules, so give the patches a go with things you have too.

SUPPORT //
If you'd like to support work like this and the wider range of what I do, considering heading over to Patreon at https://bit.ly/DK-patreon and supporting for as little as $1 a month to gain access to the DivKid Discord community, plus lots of exclusives such as PDF patchbooks, videos and more. https://bit.ly/DK-patreon

*TIMING INDEX // CHAPTERS*

INTRO & FEATURES
00:00 Hello & patch previews
01:20 What are we doing here?
01:49 Bartender features
03:24 Barback features
03:36 Send VCA features
04:09 Mingles, Cast Iron & USB 2 Channel interface

PATCHES
05:09 Modulating mixer controls - ambient drifts & FX
06:38 Input crossfading with mono mixing
09:36 Advantages of FX returns on channels
12:22 “Better” FX routings with CV control & Cast Iron
14:55 Channel overdrive for bass
16:44 4 levels of destruction
18:58 USB interfacing - a powerful FX software send & return
21:23 USB audio inputs to modular
22:19 Flamingo dubstep - live safari trail cams!
23:12 Audio rate modulation, AM, pan & making dry/wet blends"

ALA + RAR Mingles

video upload by After Later Audio

Mingles - Dual Autopanner and Dual 3 Channel Mixer/VCA || After Later Audio + Robots Are Red.

video upload by Robots Are Red

"Mix a synth patch and use Mingles as the VCA.
Blend a signal between two different outputs.
Autopan a mono signal.
Stereoize even more, an already stereo signal.

Mingles is a 12hp Dual 3 Input Mixer with attenuators for each signal, and a large panning knob for each of the two channels. There is a stereo output for each of the two channels, and a mixed stereo output of both channels. There is an internal LFO (Triangle or Pulse) that can be applied to each of the two channel’s panning. The LFO is inverted on channel 2 to allow for mirrored panning between the two channels.

There is also a VCA and external panning CV input in each of the two channels, along with a CV input for control of the LFO rate, and there is an LFO output.

The LFO can be switched between Triangle and Pulse waves with a jumper on the back of the module.

A huge thanks to After Later Audio for helping make this idea I had over 2 years ago a reality!

You can jump to any section of the video here:

00:00 - Opening
00:38 - Introduction and Rundown
02:50 - Stereo Oscillator Synth
04:36 - LFO Rate
05:09 - Back to Stereo Oscillator Synth
05:40 - Modulating the LFO Rate
07:38 - Mixing Drums
09:55 - External Panning CV
10:57 - End of Chain Panning Effect (Pulse LFO)
12:35 - Other Patch Suggestions
13:18 - Some Music"

The Nightlife Mixer Series by After Later Audio

video upload by After Later Audio

The Gremlin...

video upload by After Later Audio

VIP Mixer Series - Bartender, Barback, and Send VCA | After Later Audio | Full Demo and Walkthrough

video upload by Robots Are Red

"Bartender is a 24hp 4 Channel Expandable Stereo Performance Mixer. There are two stereo sends, DJ cue headphone out, stereo and mono master output, stereo/mono switch for each input, post/pre sends, 3 way mute switch with momentary mute, panning, and cv control over pan and the level VCA. You can also expand a Bartender with another Bartender!

Barback is a 10hp 2 Channel Stereo Mixer Expander module for Bartender. Connect them together on the back of the modules and add 2 extra stereo channels with send/return accessibility to your mix.

Send VCA gives you CV control over the Send VCA. When connected, the Send VCA CV inputs will open up the send VCA all the way to the max limit set by each send knob.

All three modules are available now and can be found at After Later Audio’s website:

Jump to any section of the video here:

00:00 - Opening
00:49 - Introduction
02:24 - Mixer Rundown
04:18 - Connecting Everything
07:56 - Mixer Basics Demo
08:34 - Clickless Mute
09:08 - Stereo/Mono Panning
09:50 - Level/VCA
10:16 - Gain
11:33 - Send/Return (Parallel Ducking)
15:20 - DJ Cue Headphone Output
16:57 - Feedback Patching
21:29 - Some Music"

Cast Iron Panner/VCA + USB 2Ch

video upload by Robots Are Red

Country Life | AtoV #Gaeto, After Later Audio #Atom - #jamuary2024 Day 15

video upload by Cinematic Laboratory

"It's the dreaded day 15 and we're almost half way on this creative journey where nothing is planned and tomorrow is uncertain. But today turned out a really good day.

I wrote a Teletype script two years ago, that was able to extract gate patterns from any CV source. Higher CV would lead to more percussive events.
But I don't see much people writing code for the modular.

So I was hoping that AtoV Gaeto would do the same, but the implementation is a bit different. It expects a shape between 0 and 1 V which is way less than regular utilities will provide, so you'd need to attenuate the hell out of your CV. It also offers some cool gate logic which can be useful for both trigger patterns as square/pulse waves. I've been a bit disappointed because I was hoping it would work like my script. But it's a cool module on its own. I made a few beats, but then realized I was missing something meloduc. I tried ALA Atom again, which is supposed to be an NI Elements clone, but no. It's an ATOM. And it's a bit different. But in the best way possible. I am just using gates to play it, and manual tweaking to make chords."

QARV Patch Tips #6 - Double Trigger Envelope

video upload by After Later Audio

"QARV Patch Tips #6 - Double Trigger Envelope"

Patch Tips Playlist

Qarv Patch Tips #3 #eurorack #modular #modularsynth #qarv #bouncingball #lfo #functiongenerator

video upload by After Later Audio

"A quick patch tip to create a bouncing ball trigger effect with Qarv using only two channels."

A Modular Approach to Eurorack Mixing with BARTENDER & BARBACK // After Later Audio at Knobcon

video upload by DivKid

"Here we have several new modules from After Later Audio from Knobcon 2023. Lenny takes us through Bartender, Barback and Cast Iron which make up a new expandable, modular approach to Eurorack format mixing."

All parts here. See the post labels below for more.

2 Minute Breakdown: Dice (Mutable Instruments Marbles)

video upload by After Later Audio

"@RobotsAreRed walks through all the base functionality of Dice, the Random Sampler in our Mutable Instruments Classic line."

Mutable Instruments Classics from ALA

SHIMMER

video upload by murratti 127

bass drum • mosaic alan , pique, morcom, enigma • after later audio
roucha legio, yester versio • noise engineering
switch 4 • joranalogue
Boundary • schlappi engineering
kermit mk3 • industrial music
mimeophone, maths • make noise
night rider, M185, vector wave • ryk
passive LPG • intellijel
motion MTR • molten modular
Hope you like this video! Comments welcome!

MACHINE

video upload by murratti 127

"Alan from After Later Audio plays the bass drum from mosaic and resonate from after later audio as a touring machine, this signal is filtered with night rider from ryk and the mimeophone is used as an effect. Pique from after later is used as a drum voice and is controlled by 0-ctrl from make noise. disting mk4 by expert sleepers runs with shift register quantized CVs and plays acid rain's chainsaw. this signal runs through the roucha legio and yester version from noise engineering. maths and wogglebug play a little too.
Hope you like this video! Comments welcome!"

Doepfer A 101-8 Photo Phasing test ॐ

video upload by Ebotronix

"I had the original Schulte phaser in the 70's. 50 years later it comes as a 4HP Eurorack version from Doepfer. it has no internal LFO, but with the CV input you can feed it with all modulation signals. Many thanks, Mr. Dieter Doepfer, will order a second A 101-4 module....
used moduls....
Doepfer R2m , A 101-8, A111-4, A 110-4, A 126-2, A 171-4, A 177-2 (3x)
After Later Audio Ornament and Crime
XAOC Batumi (2x)
Mutable Instruments Shades , Ripples V2, Kings
Tunefish Modular Links ,uVeils, u Peaks
Verbos Scan and Pan
Moogerfooger Freqbox ( 2x), MF 101 Filter
Strymon 2x Cloudburst
G harmonic minor scale
vid # 2258"