MATRIXSYNTH: Wednesday, August 26, 2009

Roland TB-303 Vinyl

via Dropular via hyperreal

click the image

Update: full size image below via Richard Devine
twitter.com/RichardDevine
http://www.richard-devine.com

SYNTHEX analog & effects noise

via this auction

You might recognize this one from this prior post with video. There is no relation to the Elka Synthex.

Googlish auction translation:
"SYNTHEX
Handmade analog synth and effektgernerator brand of abstract data
mint
sturdy red metal case
about 14x8 cm
VCO
2 inputs, 1 output
on / off switch
generator usable as a synth
regler: sync, fm shape effect, pitch,
make verzerrer, noise generator, synthies / keyboards fatter, and much more is possible with the device"

Korg M3 Sounds - Hit Factory - The Pulse Of EURO

YouTube via KidNepro
""Hit Factory" - Our third collection of sounds for the Korg M3 is now available!

Audio From The Sound Combi Titled "The Pulse Of EURO". No overdubbing or multi tracking was done. Everything played live into my DAW.

Music & Video - Steve Proto

More info at: www.kidnepro.com ©1984-2009 - Kid Nepro Productions"

arp 2600 noodling

YouTube via shaft9000
"1st time I get to play w/ the 2600.
I believe it's a 1972 or 73 model and the filter sure sounds like the Moog patent violator.
This is through the onboard speakers, so some of the higher frequencies are not present. Through the onboard spring reverb.
Sorry for the low light and low-er fi - this is just a quickie :)"

Obie Rack Oberkorn ARP2600

YouTube via deadsoulriot
"Just unpacked the Obie Rack and Oberkorn. First sequence using the two along with the arp. The Obie Rack has a simple patch bay for cv gates and such. The EIII is controling pitch to the Obie Rack via midi and the oberkorn is supplying gate to each voice independently. One gate is also output the arp. The Oberkorn is controling filter cv to each voice on the Obie Rack and also the Arp (3 rows of cv). The pitch of the Arp is unchanging."

2Cv - What is Art (one hand one loop mix)

YouTube via phono1337
"Just a little acid jam with the boxes, sorry about the bad camera."

What's that sound?

YouTube via phono1337. via the forum
"A TB-303 video with a difference, the beats were programmed in "tap" mode on the fly."
"a short video using tap mode on the 808&909 with a twist at the end"

Oberheim OBXa part 11 Theme from BLADE RUNNER

YouTube via magevers
"Main theme from BLADE RUNNER played on the analog vintage Oberheim OBXa synth. The OBXa was played in split mode.
Live recorded with Sonar 8;
EFX : Roland DEP-5"

Curetronic Modular VCO

via Curetronic:

"recently one of my customers sent me this picture of one of my curetronic-vco-kits he bought, and now see his great work on the frontpanel.

if someone has any questions on how he did that just email him: [address in the iamge]

best wishes

www.curetronic.com"

clear faceplate

Paia Modular Synthesizer Joystick Controller

via this auction

Vestax PCM-07 PRO SCRATCH MIDIMOD

Vestax PCM-07 PRO SCRATCH MIDIMOD from amsonx on Vimeo.

via ams on the forum:
"I've started this project with my friends Vj anatomia and Lost Dog.
this is a mod to midify the Vestax PCM-07 PRO SCRATCH.
within week i'll post schematics an detailed instructions here
http://wwwa.quartzvisuals.com"

video description in Italian:
Il progetto vestax scratch midimod nasce dalla mia collaborazone con vj anatomia e lost dog.
Nel prototipo e’ stato utilizzato un mixer pcm-07 per scratch transformandolo in un mixer da vj utilizzando un circuito di interfaccia appositamente progettato e miduino per la generazione di cc midi out prendendo i 2 pgm e il fader pcv,e tutti i potenziometri e levette dello 07 pro, e' quindi possibile controllare utti i software che usano il protocollo midi come vdmx,miss pynky, numerology etc

maggiori informazioni s

quartzvisual.com e

/www.anatomicstylism.com/

Seguiranno altri con maggiori informazioni sul progetto

Vestax MIDIMOD is a project by Amsonx, Anatomia VJ e Lost DOg.

More info and detailed schematics cooming soon

A special thanks to Tom Scarff

tomscarff.110mb.com/miduino/miduino.htm"

Googlish:
"The project was born from my vestax scratch midimod with vj collaborazone anatomy and lost dog.
In the prototype, 'used a mixer PCM-07 for transforming them into a mixer from scratch vj using a specially designed interface circuit and for generating miduino midi cc taking out the 2 and pgm pcv faders, and all the knobs and levers the 07 pro, and 'll can then check the software using the MIDI protocol as vdmx, Miss pynky, numerology etc.

s more

quartzvisual.com and

/ www.anatomicstylism.com/

Followed by others with more information about the project

Vestax MIDIMOD is a project by Amsonx, VJ Anatomy and Lost Dog.

More info and detailed schematics cooming soon

A special thanks to Tom Scarff

tomscarff.110mb.com/miduino/miduino.htm"

Sequential Circuits Prophet-10 synthesizer Ad

via Retro Synth Ads

SCI Prophet-10 airplane controller.
Note the belt strap.

Testing the Polymoog Resonator clone prototype

via JH

"http://www.jhaible.de/resonator/polymoogresodemo1.mp3 Playing with tiny potentiometers and aligator clips instead of a switch ... Sound comes from the OB-8, and these is some reverb. Mainly checking if everything works as intended ... for a *good* demo, lisen to Kenneth Elhardt's demo on youtube:

Website with PCB preview: http://www.jhaible.de/resonator/resonator.html

Blank PCB will be 27.00 Euros + 6.00 Shipping, as usual. (Available in a few week.)"

Peavey PC1600x running without battery !!!

flickr set by dipching
(click for more)

inside a Peavey PC1600x

also see Quadraverb LCD replacement

Wavestation EX backlit replacement

flickr set by dipching
(click for more)

"You have two choices, replace the backlit from the genuine LCD or replace the whole display ... then you have some information source here"

inside a Wavestation

QY300 backlit display

flickr set by dipching
(click for more)

"How to upgrade your Yamaha QY300 to get it backlighted ?"

inside a Yamaha QY300

TX7 backlit display

flickr set by dipching

"How to upgrade your TX7 to a backlit display without hassle ?"

bottom: "The display is here"

inside a Yamaha TX7

Karma new internal power supply

flickr set by dipching
(click for more)

Internal power supply replacement for the KORG Karma.

Pictured:
"How to get free from the external power supply"

inside a KORG Karma

JayB's patches for Roland V-Synth XT

YouTube via Hanni13579
"This is a demonstration of a few patches I made on the V-Synth XT. I don't know when and whether I'm going to release the bank (except one of you wants to have the incomplete package so far). However, enjoy. And don't mind asking questions.

The sound names can be read on the V-Synth's display I hope. All sequences used in songs are written down in the video. All other sequences are improvised. Don't ask for sontitles then.
Okay, "Madness Ld3" uses "In the Hall of the Mountain King" by Edvard Grieg - in a possible Hard Trance Remix. :D"