Tuesday, June 29, 2010
Andy Wig - Do you Heal, Immersion?
YouTube via arthurpainter | June 29, 2010 | 4:39
"Presented here is a transformation of the EML 400 sequence used in the previous video, but this time decimated by two Folktek devices, the Drumscape and the Subharmonic Field. It may be a kind of spontaneous disfigurement, but it seems to work."
Andy Wig - Immersion, Fragment
arthurpainter | June 29, 2010 | 1:41
"A bit of sound/imagery left over from "Do You Heal, Immersion?" This was then re-recorded to degrade the sound and to further abstract the imagery. Charming."
Atari 2600 Synthcart
via this auction
"Atari 2600 with Synthcart synthesizer cartridge, two keyboard controllers, 1/4" audio out and Highly Liquid MIDI aftermarket module! I purchased the Atari 2600 and MIDI module separately, had it installed by a licensed tech here in town. All the blippy, buzzy video game 8bit sounds are all here and controllable by MIDI. This is not software - this is the real thing and the difference is inarguably significant. Great for live performance as well."
Blacet Miniwave (eurorack)
via this auction"Blacet research miniwave, with eurorack faceplate, and eurorack power conversion kit from Plan B. No longer in production."
New England Digital Synclavier PSS System w/ V/PK Keys
via this auction"16 panning PSV polyphonic sampling voices
12mb of polyphonic sampling RAM.
It has been upgraded to the highest D processor and is running DEMAS 5.1 software
SCSI Winchester Drive Option
9.1 GB Hard Drive Full with over 14,000 Sound Files including all Factory Sounds and most 3rd Party Sounds as well
MIDI Option with 1 Input and 4 Outputs
Rackmount Superfloppy Drive for Enhanced Reliability and DurabilityTop of the Line 100kHz user stereo sampling option"
Roland Jupiter-6
via this auction"missing a tiny screw on the front faceplate (lower right hand side- under the master tune knob), and the upper/lower 'Mix' knob is slightly higher than the other knobs on the faceplate (there is a close-up pic of this below)."
New Sonic Arts Granite
"Introducing GraniteThe granular texture generator for musicians and sound designers
Available now as Windows standalone and VST"
samples on site
Admin: New Archive Format
I updated the Archive format on the right. Scroll down, find the section, and check it out. Pick a year and see what posts went up on your birthday! :) Remember, click on the arrows to drill down, don't load thousands of posts at once. Check out the post counts for each year.
Steiner Synthasystem in Eurorack?
If you recall from this post, Analogue Realities announced the Steiner Synthasystem schematics would be made available. In Analogue Realities' latest post, it looks like plans for Eurorack format modules will be made available.
"It occurred to me that I really need to consider this project not as a "one-off" system for me. With Nyle's encouragement to share and release this stuff, I realized (finally...) I need to take a more universal approach to the PCB/panel designs and consider those who are going to stuff just one or two of the modules into an existing Doepfer rack or something. I've been looking at the Doepfer racks and they can be as shallow as 80mm in front of the power supply itself. It looks like the general minimum is about 100mm and I think most modules will fit this form factor. The sequencer as it stands now may be a problem, but since the panel will be so wide, I can rethink it and make it wider, but shallower."
See the full post on Analogue Realities for more.
"It occurred to me that I really need to consider this project not as a "one-off" system for me. With Nyle's encouragement to share and release this stuff, I realized (finally...) I need to take a more universal approach to the PCB/panel designs and consider those who are going to stuff just one or two of the modules into an existing Doepfer rack or something. I've been looking at the Doepfer racks and they can be as shallow as 80mm in front of the power supply itself. It looks like the general minimum is about 100mm and I think most modules will fit this form factor. The sequencer as it stands now may be a problem, but since the panel will be so wide, I can rethink it and make it wider, but shallower."
See the full post on Analogue Realities for more.
WORM CEM Studio, Rotterdam 2010
flickr set by sun butler(click for more)
Pictured: Knobs. "arp 2500. we never quite got to grips with this one."
Video: Bastian rocking out on the VCS3 Putney.
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
