Spectral Sample Pack by Fans of Collision Sounds

video upload by Ross Totino and Fans of Collision

"Spectral Pads Sample Pack available at:

https://rtotino.gumroad.com/l/pazvmr for Logic EXS

https://rtotino.gumroad.com/l/jolvy for NI Kontakt

https://rtotino.gumroad.com/l/oohve for UVI Falcon

Nine multi-sampled instruments were created using a modular system that includes a Blacet MiniWave module, analog and digital Noise Generators, audio rate PWM, and a Yamaha FS1R as sound sources. The package contains 2GB of sample data and is available for purchase at Fans of Collision Sounds (link provided in the description)."

Nonlinearcircuits MACRAME | LOGORRHEA | VCF 1

video upload by cirtcele

"Macrame is a 6 channel mixer with voltage controlled level and panning. It uses two SSI2190 chips to do all the work.

You can use the SET pots to operate the level and pan manually, or use CV to get things moving around and up and down.

It has two synth level outputs, two line level ¼” jack outputs and a stereo line output (which works fine with most headphones too).

For some reason, probably because I was slightly askew on post-op painkillers when designing this, the panel is 21HP. I guess this means I need to release more odd HP modules to avoid gaps in cases."


LOGORRHEA

video upload by cirtcele

"Logorrhea is kind of a vocal filter; basically it is the back half of a vocoder crammed into 8HP. There are two inputs, 10 filter channels, a white noise channel and a thru channel, to feed thru the original signal(s). It uses two SSI2190 chips to do all the work.

There are no knobs.

To use, patch in one or two audio signals. Ones with lots of harmonics sound best, pulses, squares or wave-folder outputs, not sinewaves.

Patch in a bunch of CVs to set up your sounds, it expects 0-5V CV signals.

OUT is all channels mixed together.

OUT A is thru, LP (low pass), BP2, BP4, BP6 and BP8 (BP = bandpass).

OUT B is noise, BP1, BP3, BP5, BP7 and HP (high pass).

Using OUT A and OUT B in a stereo mixer (such as NLC Macramé) is nice with panning to move the sounds around."


FAST AND BULBOUS VCF
video upload by cirtcele

"This module uses the SSI2140 chip which is based on the SSM2040 VCF, tho with a few updates.

My first thought when I read the datasheets was that it would be great to design a module that could switch between a phaser and a VCF. Looking back at old SSM2040 designs, it seems most of the usual suspects (T. Henry, J. Blacet, C. Anderton et al) had much the same idea.

This module is based on Anderton’s design in Device 1-6 (yes, I spotted the error) with modifications to suit the SSI2140 and Eurorack.

There are 4 switches, one for each OTA stage, to select between (all pass (phaser) and low pass filter mode. You can have quite a lot of fun with 2-3 switches in one mode and 1-2 in the other.

There is a dry mix pot to mix the incoming signals into the OUT signal, which is taken from the 4th OTA stage. This is probably more commonly used in Phaser mode, but there are no rules, so do whatever you like.

POLES is a weighted mix of the outputs of each pole, it is a bit shy when all switches are turned to Low Pass but perks up very nicely when one or more switches turned to Phaser.

The SSI chip is a bit tight to solder, have your bottle of flux ready, otherwise it is a pretty easy build."

Blacet Research Frac Rack Modular Synth System w/7 Modules & SKB Rack

Note: Auction links are affiliate links for which the site may be compensated.

via this listing, also on Reverb

"Tested and functioning as intended. Includes SKB rack and owner's manuals for 6 of the 7 modules.

Modules are:
BZ2300 Binary Zone
VCO2100 VCO
EG12070 ADSR/AD/LFO
VCA2200 Quad VCA/Mixer
MODEL2040 Mixer/Processor
FF2030 Low Pass/Notch Filter
DSC2000 Dark Star Chaos"

CLICK FOR MORE »

Serge demo 20240108

video upload by justin3am

"I did a demonstration with my Serge+friends modular for the LA Synth Club on Monday, January 8 2024. Unfortunately, the multitrack audio didn't record correctly and the audio the camera captured was bad. Also the camera cut out after like ten minutes. :facepalm:
C'est la vie. I'm just glad we had a nice turnout."

Blacet Research 2090 Mini Wave wavetable frac rack modular Grant Richter / Wiard

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Note auction links are affiliate links. See the site's privacy policy for more info.

"Blacet Research 2090 Mini Wave. Classic wavetable module designed by Grant Richter. Factory build. Cosmetically in excellent condition with a small amount of rack rash. Tested, working exactly as it should."

CLICK FOR MORE »

Modways by Benge

video upload by zack dagoba

"A simple sequencer sketch on the Modcan A Series, using the ever-wonderful Modcan Wiard/Blacet Mini-Wave wavetable VCO"

Blacet Modular System Fracrack Synthesizer System

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Additional Tone Tweakers Listings, also on Reverb

"This is a 3 rack set of hard to find pre-assembled Blacet Modular frac rack compatible modules. Fracrack or fractional rack modules were the precursor to eurorack modulars, and some feel they sound better than the euro rack standard. Some of these modules were factory assembled and some were not. There are a couple partially cut wires in the non-factory assembled modules that we will probably remove entirely before shipping. All modules were tested individually in another system and determined to be working properly. Power supply and and rack enclosure are not included. If you need a power supply, please email us as we may be able to provide one for an additional cost.

This sale includes the following:

3 racks

Rack 1:
STG multiples
Blacet Research VCO 2100
Blacet Research Dual Filter 2420
Blacet Research Final Filtre 2030
Blacet Research EG1 2070
Blacet Research Dual Lin VCA 2410

Rack 2:
STG multiples
Blacet Research VCO 2100
Blacet Research Dual Filter 2420
Blacet Research Final Filtre 2030
Blacet Research EG1 2070
Blacet Research Dual Lin VCA 2410

Rack 3:
Blacet Research Stonz 2440
Blacet Research Window Comparator 2700
Blacet Research Dual Filter 2420
Blacet Research Klang Werk 2010
Blacet Research Time Machine 2050

15 frac rack power cables"

CLICK FOR MORE »

BLACET Frac Synth with 10 Modules and Case

Note: Auction links are affiliate links for which the site may be compensated.
Blacet Research MD2600/2650 Module Tutorial video upload by jblacetIII

From the listing:

"SCANNER

This selects three inputs via a control voltage and sends it to the output. Musically interesting, and you can see the YouTube video on how this one's designed."

via this auction

CLICK FOR MORE »

Blacet Research Frac Format Modules

Note: Auction links are affiliate links for which the site may be compensated.

via these listings

Blacet Research 2310 Filthy Filtre frac modular multi-mode VCF

Blacet Research 2000 Dark Star Chaos frac rack modular very rare first run Rev 0 module

Blacet Research 2010 Klang Werk frac modular complex ring modulator

Blacet Research 2200 VCA Quad Mix frac modular voltage controlled mixer / VCA

Blacet Research 2070 EG1 voltage controlled ADSR/AD/LFO frac rack modular

Blacet Research 2410 Dual Linear VCA frac rack modular

Blacet Research 2210 Multiple/Attenuator frac rack modular

CLICK FOR MORE »

3am - Stumble

video upload by justin3am

"A self-playing patch featuring Serge, Lorre-Mill, Blacet/Frac and Bugbrand modular synths and ZOIA Euroburo from Empress FX. Bad lighting but some neat sounds. Probably longer than it needs to be, lol."

Blacet Research Audio Synth Modules

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Blacet Research Audio Synth Modules, set of 6, FRAC Rack compatible, with 15v power supply. Everything powers up and is working just fine, but see detailed description below. FRAC rack modules are sized the same as Eurorack and API 500 series, but have 15v power requirement. The sale here includes a complete analog synth set, with the power supply. One of the six modules though (the chaos noise module) does not have a power supply base connector, so some electrical wiring is needed to power that one. The included power supply here has leads that plug directly into each of the other five modules, so those five are ready to "plug and play." Your on your own though as far as figuring out how to power up the Dark Star Chaos module.

Manuals for operating each of the six modules are included.

I believe you can mount these modules in a number of different types of racks. I used a 3-unit 19" wide audio rack, plus I had rails with mounts for the modules and rack ears to attach to that standard 19" audio rack. No mounting material is included with this sale, but it's easy enough to get that stuff. Check at Blacet.com if you have doubts.

From Blacet.com, you can get more info. Here is a general comment from their FAQ:

"ARE USED BLACET MODULES A GOOD BUY?" WE DON'T PRODUCE HUNDREDS OF ANY ONE MODULE, SO THE USED DEPARTMENT IS PRETTY SLIM. DON'T EXPECT MANY BARGAINS... THE EURO MODULES TEND TO USE +/-12V POWER; THE AMERICAN, +/-15V. OUR +/-15V AND POWER CONNECTOR SYSTEM IS FULLY COMPATIBLE WITH SYNTHESIS TECHNOLOGY (MOTM). THE NEW PAIA MODULES CAN BE RUN OFF OUR +/-15V SUPPLY BY USING A PAIA TO BLACET CABLE AND REMOVING OR JUMPERING THE PAIA MODULE POWER INPUT RESISTORS. SEE THE PAIA SITE FOR MORE INFO. OTHER MAKERS SUCH AS WIARD AND METALBOX ALSO USE OUR CONNECTOR."

CLICK FOR MORE »

Synton 3000 frame with CGS Serge, Blacet and Jurgen Hailble modules

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The Synton modules were expertly rebuilt and all the pots are a year old. The CGS Serge, Jurgen Haible Frequency shifter modules and Blacet were built and re-paneled by the same engineer who worked on the Synton 3000 only 6 months ago. It really does sounds great. If I were to keep it I would replace the PS with a nice linear supply but works fine as-is.

3017 VCF (2 pole state variable filter)
3224 Hi/Low Pass VCF
3005 EGR (ADSR)
3010 VC-EGR (VC-ADSR)
3218 INV / SLR (Dual inverter/offset and slew limiter)
3233 S&H / LFO
3235 ENV / CPR (Envelope follower, comparator, and trigger delay)
Blacet 2100 VCO
Blacet / Wiard Miniwave with Socket Rocket
CGS Serge WAD (Wilson Analog Delay)
Jurgen Haible FS-1A Frequency Shifter
CGS Serge Dual Pre-amp
Blacet Power-supply and distro unit

All housed in a 6u 13" deep steel Hammond rack."

John Blacet's Blacet Research Modular

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Blacet Research Analogue Synthesizer Rack:

14 analogue synthesizer modules mounted in a "Frac Rack" type cabinet:

2 VCOs, 4-tap control voltage delay and digital noise generator, MIDI to control voltage/gate/sequencer, wavetable VCO, voltage controlled LFO, Delay/Attack/Decay LFO Envelope module, Dual VCA, Multi attenuator, IEC-type removable 120VAC power cable, 2 dozen assorted patch cables, extra power supply harness. User manuals for all modules, full documentation (manual, parts list, assembly instructions, schematic) for eight modules.

John Blacet was an electronic engineer, designer and all around smart guy who invented and manufactured music synthesizer building block modules in kit form for 37 years. This one was his own."

CLICK FOR MORE »

Blacet Filthy Filtre VCF Frac Format

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"12 dB State Variable design
Voltage control of frequency and Q
Two position Q switch: "Filthy: X10, X100"
+/- CV mod attenuator with switchable destination: Freq or Q
VC mode select: switch or morph (LP, BP, HP, All Pass)!
Plus separate mode outs: LP, BP, HP, Notch

This is a 12dB/octave response voltage controlled filter. The design is based on the classic State Variable configuration that provides simultaneous low pass, band pass and high pass outputs. In addition, the Filthy Filtre has notch and all pass (phase shift) outputs.Voltage controlled Q is also provided with a special dual range feedback circuit that gives maximum total crunchy mind warping self oscillation. Beware your ear drums, amps and tweeters at high levels! An additional modulation input, routable to either frequency or Q through a bipolar attenuator, is a handy feature.The mode or filter type is also voltage controllable, allowing switching or morphing between low pass, band pass, high pass and all pass filter types. Separate audio outs for most filter types are also found at the module bottom.

Note : as this is a Frac module it is not power-compatible with eurorack systems (ie this needs +- 15V)

if you have a frac system however it is patch compatible with a eurorack system"

CLICK FOR MORE »

Blacet Time Machine Delay TM2050 Dotcom / MU Modular Synthesizer SN 10000126

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Incredible Analog Delay converted to Dotcom / MU format by Synthcube.

Bought new in January 2015.

Carefully used for a year and then kept in storage for the last 3."

CLICK FOR MORE »

Blacet Frac Rack Modules

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Blacet Frac Rack
1 EG-1
2 MIXER PROCESSORS
1 SVCA
2 TEM
1 MIDIVERTER
1 PASSIVE MULT
1 FOH JOYSTICK
1 RAK-2
This is a Frac Rack system +/_ 15v. Module I/O compatible with Euro Rack.

Blacet Synthesizer Modules, Chaos, Frequency Divider, and Final Filter

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

RIP John Blacet

It has come to my attention from Joshua Shroyer that John Blacet passed away on June 22 after a battle with cancer. There is a thread on his passing at Muff's as well. The news comes as a bit of a shock. The last email I received from the Blacet newsletter was dated June 19, with only "Sorry, closed for now.....". I thought this was in reference to the latest sale. The email I had prior to this, dated April 18, was for a Rak-3 sale. There was no hint of his cancer or condition. John was extremely private. He reached out to me back in October of 2017 for a banner on the site. He continued the banner through December of 2018 and then just kind of disappeared. His communication was always brief and non personal. I respected that and I respected his privacy.

The Blacet website is currently down: http://www.blacet.com. The first two images in this post are from the Internet Wayback Machine, dated June 22, 2019.

I'm assuming anyone that comes to this site is familiar with Blacet and his Frac rack format modules. The Blacet.com domain name was registered back on June 6, of 1999. He was creating modular synths before the modular scene became popular, before eurorack took off. Back then Frac was king for many. Blacet along with Modcan and Cynthia were it. Eurorack may have taken over, especially now that there is a market to support it, but back then, pioneers like John Blacet provided a small oasis for the world of modular, after years, if not decades, of being forgotten for mainstream synths. John helped keep the modular world alive, when by all circumstances it should have been lost. We have him and the handful of botique manufacturers to thank for what we have now. He will always be appreciated on this site. Not only for his creations, but also for his support. His banner will remain in the banner archives, and his label will live on.

The following is from the front page of his website:

"Be inspired by the sounds, colors and shapes of nature. Find new sounds with some of our electronic music kits. Featuring everything you need to easily achieve kit building success, our kits are complete with beautiful front panels, PCBs and all the parts needed, right down to the power cable. Dedicated to Frac Rak. +/- 15 volt power and power supply protection on each module.

Our complete documentation is second to none and our module quality and feature set is legendary. Decades of experience and craftsmanship means that you can count on Blacet. Complete kits or factory assembled."

---

Apparently John was also into planes. The following is from a thread on taptalk mentioning his passing on June 22:

"John Blacet passed away June 22 at home in Lakeview after battling cancer for a year.

John was an early Sonoma Wings member who flew with us locally, in Nevada, Idaho, and the Owens Valley.

He made the first Sonoma Wings web sites.

His Atos B was for sale on www.cloudbasecafe.com and his family hopes the Atos and trike will find a good home.

hanger at the Lakeview airport" [pictured below]

Update: a picture of John from his Facebook page.

BLACET 2100 VCO FRAC-RAC

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The Blacet VCO is an outstanding mix of stability, accuracy and unusual features at a bargain price.
Highly Stable One Volt per Octave Response

(Meets or exceeds industry standards for stability and tracking accuracy)
+/- One Octave Input for Transposing
Linear and Exponential FM with Switch and Level Knob
Voltage Controlled Waveform: Triangle to Square with "Tube" Sound
Voltage Controlled Pulse Width Modulation
Five Output Waveforms: Sine, Triangle, Sawtooth, Pulse and VC Wave
Sync Input
Standard +/-5V Waveform Levels
Built in precision voltage reference for calibration"

CLICK FOR MORE »

Blacet Research News: Small Business Saturday Deals

This is a follow-up to the Black Friday Deals post from earlier today. The following came in on the Blacet news email list. Be sure to check out http://blacet.com for more.

"EXTREME DIY FILTHY FILTRE DEAL:

Use your own parts to complete one of the most amazing filters ever!

PCB, Front panel , Manual: $39.
Pots, knobs: $12

Plus, all regular complete kits: 20% off.

Offer runs from now until Sunday midnight, 11/25.

How to order:
Send an email to blacet@blacet.com with items you wish to purchase, including knob color, power cable length. Include your shipping address.

We will send you an Invoice payable with credit card or pay pal."