video upload by CatSynth TV
"Elton Glover of Otter Mods gives us a tour of their offerings, including the O.T.T.e.R pattern generator, Itero step sequencer, and Triquetra triple shift register module.
For more information, please visit https://ottermods.com
For more on Knobcon, please visit https://knobcon.com
0:00 Introduction
0:37 O.T.T.e.R pattern generator
1:56 Itero step sequencer
2:36 Triquetra triple shift register module
5:36 Conclusion
Please consider supporting this channel to help us bring you more synthesizer tutorials and other content.
Merch: https://shop.catsynth.com
Patreon: / catsynth
Ko-Fi: https://ko-fi.com/catsynth
"Triquetra is a linear feedback shift register module, with three independent registers that have their own Gate and CV output. The clock for the second and third register are normalled to the first, but can be supplied with their own clocks to get a wide range of versatility from the module. A clock source is required to generate bits. The toggle switch will change between Looped and Free Run mode.
Each register has an attenuator for the CV output.
The Gate mode can be switched from a 50% clock cycle when the last bit is high, to a high output as long as the last bit is high. This gives the result of switching between either a “Trigger” style or “Leggato” style Gate. The Gate mode can be switched at any time by pressing all three buttons at the same time.
Each button corresponds to the three registers, and will cycle through the bit generating algorithms (seven in total). The LED will cycle through different colors corresponding to the following:
RED = LFSR1
GREEN= LFSR2
RED/GREEN= Small Number Modulus
BLUE= Fibonacci Sequence
RED/BLUE= Prime Number Sequence
GREEN/BLUE= Large Number Modulus
RED/GREEN/BLUE= Otter Mods Cryptograph"
Alternate panel design below.
