Friday, October 10, 2014
I LIKE IT ELECTRIC by SOLTEC
"These tracks were created entirely on the Korg Electribe MX. They will be included in an album of all original songs created using only hardware. The outputs of the EMX were routed to an Elektron Octatrack and recorded as 24-bit files using the sample recorder. Loudness was achieved using the tube gain and a small amount of compression/limiting on the Octatrack. No computers were used to process the track."
YAMAHA DX7II "Carrier"
(c) 2014 vintage synthesizer demo track by RetroSound
all sounds: YAMAHA DX7 II FM Synthesizer (1987)
drums: LinnDrum (1982)
recording: multi-track without Midi
fx: reverb and delay
Back to the 80s
Published on Oct 10, 2014 Wein Glas
"A little Journey Back in Time, where the new EHX Clockworks meets a Simmons SDS8 and a Korg Mono/Poly!"
EHX Clockworks on eBay
MFB Microzwerg MKII - "Clock Tower"
Published on Sep 11, 2013 rhatti sin kanal
MFB on eBay
"A quick demo of the MFB Microzwerg MKII.
All sounds (except drum sounds) were made with the Microzwerg.
FX: delay & reverb.
Song based on the "Clock Tower" level from the Sega Master System game "Castle of Illusion".
Originally composed by Tokuhiko Uwabo."
YAMAHA CS-10 SN 4801 with Custom Knobs
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Note this one needs work: "The unit turns on and plays notes but the sound it produces is very unstable in pitch somehow, especially when you move the Pitch Bend slider. The LFO MOD on VCO seemed like its not responding too well either, so I'm selling this AS IS to be used with some servicing/adjustment done. Otherwise everything else appears to be working fine to the best of my knowledge, all other knobs and keys and switches seem to be responding as they should."
via this auction

Sequential Circuits Prophet 600 SN 1023
Macbeth M3X SN 0021
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"It is estimated that only around 200 of these were ever made. This one is serial number 21. Everything is working 100% and it has recently had a full service by James at Synth Repair Services, who also installed a couple of mods (details below).
These synths are often favorably compared to the mighty MiniMoog. I can't offer a direct comparison as I have never played a MiniMoog, but I can tell you sounds enormous. I guess if you are looking at this auction then you already know this.
So, this auction includes just the synth itself and a power cable. There was never a printed manual for these (that I know of) but you can find a PDF online.
Information on the mods:
Oscillators 2 & 3 now have additional "low frequency" modes. Oscillator two now has Xmod to VCF (low freq) and Mod VCO 1+3 (low freq). Oscillator 3 has X mod to VCF ( Low Freq) and Mod to VCO 1 + 2 (low Freq). These are accessed through the Route knobs to the right of the oscillators main pitch control by turning the routing selector to the far right, where the extra modes are. This means that the mod is totally invisible and in no way changes the functionality of the M3X. They are just extra modes which can be accessed when needed. Low Frequency means that the oscillators can be pitched down further than normal in order to act as LFOs. They work very well, although if you pitch them down too far thay can affect the pitch of the other oscillators - a minor quirk that doesn't really affect anything as long as you know about it.
Overall, this is a stunning synth in stunning condition, with a couple of very nicely installed modifications which in no way harm the synth but add features which were not before possible."
via this auction

These synths are often favorably compared to the mighty MiniMoog. I can't offer a direct comparison as I have never played a MiniMoog, but I can tell you sounds enormous. I guess if you are looking at this auction then you already know this.
So, this auction includes just the synth itself and a power cable. There was never a printed manual for these (that I know of) but you can find a PDF online.
Information on the mods:
Oscillators 2 & 3 now have additional "low frequency" modes. Oscillator two now has Xmod to VCF (low freq) and Mod VCO 1+3 (low freq). Oscillator 3 has X mod to VCF ( Low Freq) and Mod to VCO 1 + 2 (low Freq). These are accessed through the Route knobs to the right of the oscillators main pitch control by turning the routing selector to the far right, where the extra modes are. This means that the mod is totally invisible and in no way changes the functionality of the M3X. They are just extra modes which can be accessed when needed. Low Frequency means that the oscillators can be pitched down further than normal in order to act as LFOs. They work very well, although if you pitch them down too far thay can affect the pitch of the other oscillators - a minor quirk that doesn't really affect anything as long as you know about it.
Overall, this is a stunning synth in stunning condition, with a couple of very nicely installed modifications which in no way harm the synth but add features which were not before possible."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH













© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH