Rhodes Chroma Expander Synthesizer

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"That is right. You can believe your eyes. This is a fully functional Rhodes Chroma Expander. I have never seen one for sale on eBay or anywhere else over the last few years. I would dare say that this may be one of the few chances you will ever have to own one.

This Rhodes Chroma Expander, serial #0110, has been completely painstakingly restored internally over the last 3 1/2 years at Three Wave Music. Prior to that, additional restoration work was done by David Wilson at the Synth Museum in New Hampshire. You will want to refinish the wood to bring it back to its former glory as the outside is not where you will want it to be. There are also a couple of small spots where the front panel membrane is slightly lifted but it does not interfere in any way with performance of the unit. Three Wave Music secured it and made sure it was stable.

It is interesting to watch the interest in Arp 2600s. This is literally 6 of those synths [it actually isn't - totally different architecture and implementation - see etheory's comments below]; it is polyphonic, AND PROGRAMMABLE [correct]. It eats 2600's for breakfast. This one also has an upgraded power supply, and onboard MIDI with the CC+ upgrade. if you look at the invoice, you'll see there was a multitude of work done to bring it back to spec. $1700 of restoration at Three Wave Music alone. Operational manuals for the synth and CC+ are readily available on the Rhodes Chroma website."

CLICK FOR MORE »

Tom Oberheim Two Voice Pro Synthesizer SN 0046

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Very lightly used in my smoke free studio. Selling only because of financial need, it is a beautiful instrument but unfortunately some unexpected expenses have come up. Ships to the lower 48 United States only. In perfect working order and perfect cosmetic shape. Ships in original packaging. Serial Number 0046."

Elektronika EM-25 (electronika EM25) soviet analog synth

Note: links to listings are affiliate links for which the site may be compensated.
Elektronika em-25 Published on Apr 10, 2012 Mike C

via this auction

Note the video above was in the auction for demo purposes only. It is not the specific unit for sale. I couldn't find it in the archives, so up it goes.

"EM-25 is an interesting Soviet string-synth that looks and feels like a curious cross between Moog Opus 3 and ARP Solina. Like other Soviet synths, has got a distinct sound of its own and can easily compete with synths that have grown to become classics.

EM-025 HAS 3 SOUND SECTIONS : STRINGS, ORGAN, BRASS. All 3 sections You can use as independent sound or these will be mixed in any combination of 1, 2 or 3 sources with select buttons."

CLICK FOR MORE »

Classic Roland Juno 106 Synthesizer SN 473650

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Arp Quadra synthesizer demo take 1

Published on Aug 19, 2015 Diseño Corbusier

"Arp Quadra synthesizer demo"

sismo-lito-ice

sismo-lito-ice from sismo on Vimeo.

"Synth of the month is back!

We are proud to present Lito Ice version.

Four oscillators 2 x square, triangle and sine(low frequencies), filter section, built in 2 analogue sequencer (one connected to sine by gate and the other connected to the square and triangle by cv). An oscillator mixer (square1 / square2 and triangle) plus 2 frequencies control by LDR (Light Dependent Resistor) in the lower panel. Two independent output 3/4 inch (one to sine and the other to mix waves).

Specifications
Polyphony : monophonic
Oscillators : 4 (1x sine - 2x square - 1x triangle
Control : Internal 2x eight step sequencer (1 gate -1 cv)
External 2x cv in, 1x sync in - 3x sync out
Current draw: 12 Volts (center positive) (Not included)
Weight: 450g
Dimensions: 15cm (H) x 12,5cm (D) x 13cm (W)

IMPORTANT SAFETY CONSIDERATIONS!
- Do not exceed a 15VDC wall wart
- Make sure the wall wart has at least 300 mA capacity or more."

Monomachine "Sampling"

Published on Aug 19, 2015 Catabolic's channel-Music & More by Catabolic

"If you are looking for a lo-fi, gritty, grimy sampler, the Monomachine might be your new best friend. This video gives you an idea of what the Monomachine sounds like as a sampler, and also how to prepare your samples. I use the Elektron Octatrack to help prepare samples although it's not required.

(Technical note: the Monomachine itself does not sample so you could call this a rompler to be very specific.)"

Synthino XM How We Assemble Bottom Boards - GetLoFi Handmade Electronics DIY Synthrsizer

Published on Aug 19, 2015 GetLoFi

"www.synthino.com Synthino XM Polyphonic MIDI Synthesizer
http://goo.gl/JcljO6 Soldering Iron that I use 30W"

Roland MX -1 Yamaha SK20/Dx7

Published on Aug 19, 2015 muzykujkropkacom

ENSONIQ ESQ-m (ESQ-1) - 40 SynthCorner Presets

Published on Aug 19, 2015 Synth Corner

"This is presentation of 40 custom designed SynthCorner presets for Ensoniq ESQ-m synthesizer (also ESQ-1). There are many electronic sounds grouped as: synth, pad, bass, seq, lead. Modulation wheel is used on many presets to present filter cutoff dynamics.

You can buy this 40 Presets in SysEx/MidiFile format for only 6 Euros (via PayPal). Just email me at vukansto@gmail.com.

Ensoniq is a hybrid synth with digital waveforms (16 short samples) and analog filters (CEM 3379).

Ensoniq ESQ-m specifications:
- 8 note polyphonic
- 3 waveforms (OSCs) per program (preset)
- 9 part multitimbral (!!!)
- analog CEM filters
- 2 Outs
- MIDI In/Out/Thru
- RAM & ROM Cartridge (80 programs/presets per cartridge)

Enjoy!"