Moog Etherwave Theremin Synth SN 11282

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Superb condition moog. In lovely hardwood case. With stand included.

Fully working."

CLICK FOR MORE »

Roland MKS-80 Super Jupiter REV 3 Vintage Analog Synthesizer SN 470696

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Roland MKS-80 Super Jupiter vintage analog rack mount synthesizer. This one is a rare REV 3 model with CEM chips. The unit appears to be fully functional, all the buttons and switches and keys working fine with no noticeable noise on the sliders and knobs. Writing and Editing program sounds is fine too. This one has brand new internal battery installed with original factory presets loaded in."

CLICK FOR MORE »

ARP PRO DGX

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Arp pro dgx , fully restored , all tantalum capacitors replaced , power supply upgraded , key bushings replaced , TOUCH sensor fully working"

CLICK FOR MORE »

Quantum DJ+VJ, Vestax MDX

Published on Jun 7, 2017 mCKENIC

"Fun with the Quantum DJ, Quantum VJ (from warmplace.ru) and a Vestax MDX delay pedal. Don't know if shorting the Quantum DJ pins like this is a good idea long-term... :-)"

synSpace: Drone Runners - Synth Meets Video Game

Published on Jun 6, 2017 Dan Samuel

Thought this was kind of interesting. It's a synth in a game for Android. The first and sixth video cover the synth.

The following is the description for the first video, synSpace: Drone Runners - Synthesizer Filter Test:

"Once again I didn't notice the camera thought I was in portrait mode, and once again google appears to have magically fixed it, but if it is odd for you, then it is my fault, not Google's

This is a capture of the current state of the Filter and the overall set up of the Synthesizer (that is built into the synSpace game, to facilitate making musical instruments and sound effects for your star map compositions) Or just something to waste time with.

Metaphorically, I am pretending the row of attenuators is my 'eurorack' and each knob is one slot of the rack, and that knob does whatever the most important thing the module in that slot does.

Tap an attenuator to open its module's detail window, which has more buttons, unique to that module. Tap a Contour Generator 'tab' above for details on a contour. So lots more little windows of information...

Unlike a eurorack, however, the connections between modules are a hardwired pipeline, I wave my hands and say that someday my script api will let you rewire the pipeline under scripted control. Then I push the responsibility (and the UI) to you, the starmap developer!

OK, the pipeline is roughly keyBoard Note freq and impact starts all the contour generators at the same time and the FM module adjusts the 'key freq'

the key freq then drives up to 9 oscillators, though recent changes make the individual oscillators more powerful so 9 is overkill which means I can dump some for more modules in the future.

The oscillators have a waveform (sine, triangle, square, saw and -saw), a distortion, and a half step offset option so an individual oscillator can be tuned to 'key freq plus a fifth' for an appealing extra voice in every note.

Oscillators are mixed with their individual attenuators and that output goes into the Filter. The filter can be configured in many ways and its output goes to the AM module and then to the reverb and final AGC and output.

The oscilloscope can be aimed at any number of 'special interesting values' because I store those values in an easily indexed array. My thought is that is half a cross switch to allow a 'virtual cabling' where the cable starts at the input of some module, and then connects to one of these special outputs. which are the outputs of all the modules (plus some). Should be pretty flexible. But that part is vaporware. Today it's the fixed pipeline"

Analogue Solutions Vostok "Orbitar"

Published on Nov 4, 2014 Luc Debeck

"I'm the proud owner of an Analog solutions Vostok v2, a modular matrixsynth. I connected different pathces and used the sequencer ( 8steps) of the modular. Oscillator 1,2 and 3 connected to the filter. Osc 1 used with 3 different waveshapes Osc 2 clocked with to the step sequencer and LFO 1. Osc 3 connected to LFO 2. Noise connected to High pass filter. VCA cv connectesd to Envelope 1. I also synhcronized the Vostok with a 16 step sequencer in Ableton Live. The sound is not a great quality due to the video taken with self phone"

Exploring the Buchla

Published on May 9, 2017 Luc Debeck

"First attempt exploring my Buchla system. The only effect used was a Boss RV-6 reverb pedal, not other effects were used.

The Buchla consists of VCO 258, quad gate 110, Lpf 192, Wavewiper, CV processor 156, VC Delay, Mixer, Attenuator, Waveformer, Timbre 178.

Built by Plus Minus Audio synthesis"

DIY Modular Synthesizer by DutchBigEd

Published on May 30, 2017 DutchBigEd

Playlist:
Arduino controlled Midi interface for my modulair synthesizer
Arduino controlled Midi interface for my modulair synthesizer
Arduino controlled VCA, Sample & Hold, Random Module
Arduino controlled Opl3 YMF262 module for my diy synth
Trigger Module doing Euclidean Rhythms
Euclidean Trigger Sequencer using Arduino
Triple PT2399 Reverb
my synth so far... 19 aug 2016
PT2399, delay controlled by Arduino and AD5144
my synth so far
Its a start... Drumsequencer
Drumsequencer
Sequencer for homebrew synthesizer
Homebrew synthesizer using multiple arduino and dds
On the RUN, multiple arduino diy synthesizer
Sequencer Using Tempo Setting
Sequencer Audiomode
Sequencer Intern Clock
Sequencer Audiomode 2
clock devider / sequencer
weird sounds with PT2399 board
My first drone (?)
...

Elektron Digitakt / nord drum 2 : Fast sampling with threshold setting

Published on Jun 7, 2017 Masaki Takada

"Sampling can be started in response to the input level by setting the appropriate threshold on the RECORDER page.
In the case of sampling sounds with strong attack, I felt that good results could be obtained by setting the threshold value to 10 to 15."

XILS Lab - PolyM: Films n' Friends

Published on Jun 7, 2017 Adam Borseti

"Just another demo of the fabulous, upcoming XILS Lab PolyM; a superbly authentic and meticulous emulation of the Polymoog Synthesizer! Of course, you can't even say "Polymoog" without mentioning Gary Numan, so I thought I'd make two demo tracks to demonstrate the PolyM's Gary Numan presets (which I programmed). They will be included with the released product!

DISCLAIMER: Obviously, the backing tracks have some Minimoog in them which I emulated using the end-all-be-all Minimoog soft-synth, "The Legend".

Enjoy!"

See the XILS Lab label below for more.