Roland SH-01A / Unboxing and first little soundtest (Riamiwo StudioVlog 64)

Published on Nov 10, 2017 riamiwovideos

"Unboxed the SH-01A - and tested it for a first time... love it from the first minute :) a more detailed test will follow soon..."

Roland SH-01s on Amazon | Roland SH-01As on eBay

Moog Mother 32 & MXR Flanger M117R

Published on Nov 10, 2017 3rdStoreyChemist

"Sequence on the Mother 32 synthesiser through the M117R.

No further processing except normalisation."

Prophet VS - Waves 33 bis 127

Published on Nov 10, 2017 SSM Curtis

"Stepping thru Prophet VS waves as reference.

Wave 40: 1:15, Wave 60: 2:32, Wave 80: 3:38, Wave 100: 4:42, Wave 120: 5:43"

Christopher Kah - Session XVIII Digitakt vs NI Kontrol S49

Published on Nov 10, 2017 HighWav

"Like I already said… Less material you have, mores ideas you need ! ...
Here, I just transformed my Elektron Digitakt into a synthesizer…🔥🔥🔥🔥

100% Machines. No Laptop. TOTAL IMPROVISATION.

BOOKING WORLDWIDE : booking@hjckd.am | MANAGEMENT : robert.schaeffer@hjckd.am
www.hjckd.am

www.christopherkah.com"

deltAdata - Down The Rabbit Hole (Synth Jam, pLock, Circuit , Sunrizer)

Published on Nov 10, 2017 deltAdata

"All sounds are produced by only ONE instance of Beepstreet Sunrizer on ipad mini 1, midi sequenced by Novation Circuit with a lot of step automations !
Audio recorded directly inside Sunrizer, then some COMP and EQ was used with Reaper.
Video recorded with Sony Xperia Z3C (head) and ipad 2 (front), main editing done with imovie ipad and the final video tunings and title are done into AfterEffects.

Thanks for watching !"

MOOG SUB37 + 2xMOTHER32 + MONOLGUE (use headphones)

Published on Nov 10, 2017 peter synthbrothers

"gear: korg monologue (not on cam, on the right side)
2x mother32(1sequence,1drum)
sub37 for bas
eventide space"

Division 6 DUAL MINI SEQUENCER

A few pics of my new Division 6 DUAL MINI SEQUENCER!!! Two racked shots below.

I am looking forward to giving this one a go this weekend. It's a dual 16 step sequencer that can run each sequence either independently or linked. Each one has a five octave range and offers an accent out, which should be very interesting in adding that extra dynamic to sequences.

The following is a recap on what these can do via the Division 6 website, for those that missed the announcement back in March:

"Why would you need more than one sequencer? Why would you need mini sequencers?

More sequencers = more steps
Use one for playing notes and the other for transposing those notes
Can be used as a clock divider
Run in parallel for multiple CVs / triggers
Each one gives you the standard CV and gate out, plus an ACC out (Accent? Accessory?) Use it to open up a filter, enable a glide, trigger a drum, or whatever you can think of.

The two sequencers will run completely independently, or you can daisy-chain them using the XP IN/OUT jacks to create sequences of any length.

Each sequencer has its own internal clock to get you up and running in a hurry, but you can connect an external clock if you need greater control of tempo or want to sync with other devices.

The module stores your latest sequence even when the power has been removed.

While this kit is designed to give you a Eurorack module, the PCB patterns for the jacks also have holes that will accept Johnson/Cinch-style banana jacks. There are also standoff holes on the main PCB, so you can mount them behind your own custom panel.

This module has lots of LEDs and is very shiny, but only two of them are ever on at a time which keeps it from loading down your power supply.

Inputs

CLK IN (External clock input)

XP IN (Expansion input; Starts sequencer back at step 1. Use for daisy-chaining multiple units)
Outputs

XP OUT (Sends pulse when sequencer goes past last step. Use for daisy-chaining multiple units)

CV OUT
GATE OUT
ACC OUT (Can be programmed on or off in each sequence step)


Features

CV OUT covers 5 octaves, and can be tuned using front-accessible trim pot

Sequences can be set to any length up to 16 steps by using LOOP feature

Setting a step to REST holds previous pitch and doesn't fire GATE

In Standby mode, sequencer can be used as a tiny keyboard without altering programmed sequences


Specifications

Power supply: +/-12VDC (reverse-polarity protected!).
Power supply (Optional): +/-15VDC
Current draw: 30ma(+12V) / 0ma(-12V) / 0ma (+5)
Width: 18HP
Depth: 0.83in / 21mm
Includes

Main PCB
Panel PCB
Preprogrammed Microcontrollers
All required parts to build kit
Doepfer-style Power Cable
(4) M3 x 6mm Rack Screws w/ Nylon Washers"

KORG Volcas & Novation Circuit Electronica Session 2

Published on Nov 9, 2017 014london70

"Volca Keys playing a 32 note pattern on just 4 steps by utilising flux mode and entering notes at a low tempo. Volca Bass, Volca Sample and Novation Circuit complete the setup. recorded in AudioShare via a Behringer Xenyx mixer and mastered in Final Touch."

MØFFENZEEF MØDULAR LIVE AT CONTROL. 11.10.17. TOMORROW.

via CONTROL

"JØIN US AT CØNTRØL, TØMØRRØW NIGHT 7PM, TØ WELCØME MØFFENZEEF MØDULAR FØR AN EVENING PRESENTATIØN AND INTRØ TØ SYNTHESIS À LA MØFFENZEEF WITH DESIGNER RØSS MARTIN.

WITH LIBATIØNS ØN HAND, HEAR/SEE WHAT IT WØULD SØUND LIKE TØ HAVE A GMØ, MØNGREL, BØBCAT, MUSKRAT, KRIKET, DEVIANT, DIAL-UP, BUS MELT, MØFFENMIX + JARMAGGEDDØN IN YØUR ARSENAL.

WE ARE PUTTING THE QUAD SPEAKER SETUP IN FULL ØN MØNØ PER THEIR REQUEST. SWING BY EARLY TØ GRAB A SEAT. THE USUAL SØDAS, BEER + A LITTLE VINØ WILL BE ØN HAND WHILE SUPPLIES LASTS.

JARMAGGEDDØN FRIDAY FEAT. : FULL FALLØUT

7PM
CØNTRØL
416 LØRIMER ST. #1L
BRØØKLYN NY 112Ø6

L TRAIN TO LØRIMER/METRØPØLITAN
ØR M TRAIN TO LØRIMER/BRØADWAY

CLICK FOR MORE »

Novation Circuit - Little Tease

Published on Nov 9, 2017 bananepoep

"just a little beginning of a larger set im working on just one circuit
i'm going to add another circuit and try to make a cool live set
don't mind the quality it's not very good i just wanted to hear some reactions and see if i'm on the right way ?"