MATRIXSYNTH

Rhodes Chroma Polaris Synthesizer Keyboard

Note: Auction links are affiliate links for which the site may be compensated.

Best Ambient Synth Shootout #55: Roland M-VS1 - Song 1

Published on Sep 19, 2018 Christian's Sonic Spaces

"This is the first song with the Roland M-VS1. It's a 28 voice 8-part multitimbral ROMpler from the mid-90s with a focus on vintage synths.

I used for the recording the following FX chain:
Roland M-VS1 - Alesis Ampliton - Alesis Philtre - Pigtronix Echolution 2 Deluxe - GFI System Specular Reverb 2. Depending on the recorded track some FX are deactivated

The signal went through a small Behringer mixer into the pc for recording. To create the complete song I recorded consecutively several stereo tracks. The final song was then mastered with a bit EQ and compression on some tracks and some limiting on the master track.

Well, I decided to go back to the basics, but at the same time make something useful for the synth community and do a kind of competition (I like competitions;-). What's my best synth for ambient music :-)"

Can I use the microKORG as a FUZZ pedal? OH YEAH!

Published on Sep 19, 2018 Daniel Kastner

"I experimented with pushing my amp into fuzzy distortion with microKORG synthesizer. I hope this video helps you accomplish beautiful and crushing new tones. These textures and drones can hold their own for recording or add to your overall composition.

Signal chain:
Fender HM Strat
Strymon Timeline
DOD Bifet FX10
Korg microKORG
Traynor TS-50B"

Digitech Polara Sound Demo (no talking) with Sequential Prophet 08

Published on Sep 19, 2018 Bonedo Synthesizers

Synthesizer Show & Tell: Crumar Orchestrator/Multiman-S

Published on Sep 14, 2018 Learson Peak

"Synthesizer Show & Tell EP: 5 covers the Crumar Orchestrator/Multiman-S

Each week I challenge myself to write a piece of music using only one synth from my collection, and share some tips and tricks on how to use the instrument.

The Crumar Performer/Multiman-S is an analog synth from 1977"

Learson Peak Synthesizer Show & Tell

JESSICA KERT - Z3KZ2040Z4000ONECRRESEQCB808CYM909TG3MIXZQMTRECHOCASSAMP12BFTGONEZDSP

JESSICA KERT - Z3KZ2040Z4000ONECRRESEQCB808CYM909TG3MIXZQMTRECHOCASSAMP12BFTGONEZDSP from Station 252 on Vimeo.
www.zv-k.com

TEST SERIES PART 2 Tiptop Audio Z-DSP Roland VG-99 Guitar Synth Eurorack

Published on Sep 19, 2018 Outsider Sound Design

"PART TWO
Tiptop Audio Z-DSP with Roland VG-99 Guitar Synth.
Cards used in this video are Spring Waves, Bat Filter, Spirals, and custom card form Voltage CtrlR

The purpose of “TEST SERIES” is to focus on the sound design possibilities of various gear combinations when pushed to the extremes. This series is not musical nor does it serve as an instructional video. It is all about sound potential.

Please consider supporting this channel by purchasing a sample pack or music download from www.outsidersounddesign.com"

Outsider Sound Design TEST SERIES

you might need this for your synthesizer setup

Published on Sep 19, 2018

"I just got a new cool gadget to use with your synthesizer and midi controllers/keyboards. Check it out here: http://bit.ly/mumidi

BE AWESOME and become a Patron: https://www.patreon.com/bobeats

There are obviously alternatives to this product: HobbyTronics MIDI HOST, iConnect Mio 10, Bomebox, and many many DIY solutions in the description of this video I have many more suggestions" [below]

"MuMidi HubLink provides a means for Musicians to connect USB-MIDI devices together. Typically, this might be a sound generator device (such as a synth) and a controller, such as a keyboard or similar. Its rugged yet stylish design makes it suitable for desktop, studio and stage use.

By also providing power over USB to bus-powered USB-MIDI Devices, MuMidi HubLink can remove the need for copious power connections in a MIDI setup."

USB MIDI INTERFACE vs MIDI USB HOST – What is the difference? A Beginner Friendly Overview

Published on Sep 21, 2017

"My video where I recommended a midi usb host for your dawless setup got a few confused comments so I thought I would try and explain the difference between a usb midi interface and a midi usb host. While it is a very basic topic I felt that some of you might enjoy hearing about it. USEFUL LINKS DOWN BELOW!

CLICK FOR MORE »

Acidlab M303

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Acidlab M303 Complete TB-303 Voice - Eurorack Modular Synthesizer

Oscillator: Waveform is selectable between square and sawtooth. Tuning control for setting the frequency. 1V/octave CV input for controlling the frequency. VCO-CV with attenuator (VCO Mod control). Input for de-/activating the silde function. Oscillator output.

Filter:303 low pass filter with controls for cutoff and resonance. The cutoff can be modulated with the VCF-CV input with the VCF-Mod control as attenuator.. Besides that the filter features a env-mod control for setting the envelope´s cutoff modulation depth. An audio input allows for filtering external audio material.

Envelope: manually controlled Decay-Envelope with gate input and envelope output.

VCA: internally modulated by the envelope, but alternatively it can work in gate mode. Separate VCA audio input. The accent input allows for setting accents with a CV/trigger.

The level of the audio signal at the OUT socket can be adjusted with the volume control.

CLICK FOR MORE »