INTERLUDE

Published on Oct 19, 2019 WheelRock

"All Tracks Made with My Casio CZ-5000
Bandcamp:https://nemutai.bandcamp.com/

SATOSHI (SATOSHI & MAKOTO) - SEMI-VINTAGE
https://www.jetsetrecords.net/i/72300...

SATOSHI & MAKOTO - CZ-5000 Sounds and Sequences - safe trip ST 006-LP
https://safe-trip.org/products/satosh...

SATOSHI & MAKOTO - In A Corner Of Asia / Tous Les Jours - safe trip ST 007-Single
https://safe-trip.org/products/satosh..."

machinedrum / volca fm

Published on Oct 19, 2019 ljs8888

Realistic Concertmate 660 (aka Casio CT360) keyboard demo - "Blue Edge"

Published on Oct 18, 2019 Alfonse

"Realistic Concertmate 660 (aka Casio CT360) keyboard (1988)

All sounds you hear in the track were made using the Concertmate 660 and run through various single effects pedals (TC Electronic Sub Up octaver for adding some depth to bass notes, the very synth-friendly Yamaha SDS CH-10MII chorus pedal, and the Boss DD7 digital delay). Parts were recorded to a DAW, where I added compression, EQ, and reverb as required. I sampled individual drum hits from slowed-down rhythms, to allow fresh beats to be built, rather than using the rhythms found on the 660 itself.

The aim of these videos is to see what you can create using sounds from ageing home keyboards together with current production tools. This one was a challenge, in all honesty, as the sounds are generally a bit thin and dull, but there was something about that Violin patch that felt right for a synthwave-inspired track...

Music: 'Blue Edge' (C) Copyright 2019 Alfonse
Download here: https://alfonse.bandcamp.com/album/l

ALFONSE
Store: http://alfonse.bandcamp.com
Twitter: http://twitter.com/alfonsemusic
Instagram: http://www.instagram.com/alfonsemusic
Soundcloud: http://www.soundcloud.com/alfonsemusic"

New Artinoise re.corder Demo Videos

Published on Oct 18, 2019 Davide Mancini

See this post for details on the Artinoise re.corder.

Playlist:

1. re.corder (alternative) pad keyboard

Re.corder can be played laying it flat. You can associate whatever notes you want to the 9 front touch zones. Switching octaves with the lip sensor.

2. re.corder (alternative) beat designer

Re.corder can be played laying it flat. You can associate whatever notes you want to the 9 front touch zones. Switching octaves with the lip sensor.

3. re.corder (alternative) aggressive arpeggiator (GarageBand)
Re.corder can be played laying it flat. You can associate whatever notes you want to the 9 front touch zones. Switching octaves with the lip sensor.
4. re.corder Fender Rhodes

Re.corder can be played laying it flat. You can associate whatever notes you want to the 9 front touch zones. Switching octaves with the lip sensor.

5. re.corder (alternative) classic guitar arpeggio

Re.corder can be played laying it flat. You can associate whatever notes you want to the 9 front touch zones. Switching octaves with the lip sensor.

6. Swinging re.corder (baritone saxophone from SWAM libraries)

I am not a player.. I apologize for errors! This is just to show capabilities of the re.corder in its present form! Using velocity and aftertouch expression from breath sensor and vibrato depth with accelerometer data (inclination)

7. re.corder jazzy solo (Oboe courtesy of SWAM library by AudioModeling)

I am not a player.. I apologize for errors! This is just to show capabilities of the re.corder in its present form! Using velocity and aftertouch expression from breath sensor and vibrato depth with accelerometer data (inclination)

Old Light Performed by Dave Valdez, Ellie Pritts and Zachary Paul

Published on Oct 18, 2019 Perfect Circuit

"This is a live Performance of 'Old Light' composed by Dave Valdez with visuals by Ellie Pritts, it is performed by Dave, Ellie and Zachary Paul. We filmed this performance on 10/9/2019 at Substrate Gallery where Ellie Pritts' show Spectral Horizon was opening.

Ellie Pritts was playing her Cello through an Old Blood Noise Endeavors Dark Star V2. Zachary Paul was playing his violin through a Strymon Volante and Red Panda Particle 2. Dave Valdez was using a Chase Bliss Mood with his tape loops.

To see other events we are involved with or are hosting go to our events page here: https://www.perfectcircuit.com/events"

Bana Haffar's Morphagene Reel

Published on Oct 18, 2019 Todd Barton

"I've been loving Bana Haffar's MakeNoise Morphagene reel and the maniplulation potential with the Buchla Easel & Intellijel Planar 2.

The reel is freely available at:
https://freesound.org/people/makenois...
Bana's soundcloud: https://soundcloud.com/banahaffarmusic"

Qu-Bit Electronix Prism

Published on Oct 18, 2019 CatSynth TV

"We check out the Prism multidimensional signal-processing module from Qu-Bit Electronix, with an assist from Big Merp.

0:04 Introduction
0:38 Basic functionality with steady-state Sputnik Dual Oscillator as input
2:15 Demo with Dual Oscillator controlled by Make Noise Rene Sequencer
3:31 Using Arturia MicroFreak as source
4:14 Clock mode (synchronizing delay times to external clock)
5:00 Using MicroFreak pressure as CV control from Prism decimation function
5:10 Big Merp crashes the party

'Prism is a multidimensional signal processor that creates a framework for the spectral metamorphosis of any input signal. This stereo audio buffer can be navigated through on 3 axes, each of which provides a different sonic journey through its array of time based controls.

The X and Z planes are home to a flexible delay line capable of long clocked delays, slapback echo, or comb filtered vocoder-esque timbres. On the Y axis is the decimate control. This sets the audio fidelity of the buffer by manipulating the sample rate and bit depth of the output. A state variable filter with configurable low pass, high pass, and band pass outputs can be enabled at the beginning or end of the signal chain providing yet another dimension of spectral transformation. And thanks to its digital architecture, the current buffer contents can be locked in place with the Freeze control, creating glitch and beat repeat effects which can be synced to an external clock source.'

For more synthesizer demos, please subscribe to CatSynth TV and visit www.catsynth.com

(Bernie Sanders action figure voiced by Amanda Chaudhary)"

The Day of the Dead Vult Giveaway

Published on Oct 18, 2019 Omri Cohen

"Vultari and Boomstick are 2 new modules from Vult, an oscillator, and a filter. Celebrating their release and the upcoming Day of the Dead, Vult and I are doing another giveaway :) Here are all of the details:

- Build a patch in VCV Rack using Vultari as the only sound source and Boomstick as the only filter. Both are from Vult and both are available for free here - https://vcvrack.com/plugins.html#vult...
- You can use any module you like, free or commercial, virtual or hardware, as long as it's not used as a sound source (no noise, no samples, no other oscillators), and as long as it's not used as a filter (no EQ modules also). If you're not sure if a module is a filter or a sound source, feel free to write to me and ask.
- Record a video of the patch, for example with the VCV recorder module, and upload the video to YouTube.
- Send the link to dotdvult19@gmail.com
- Today is Friday, the 18th of October, and the deadline for submissions is Thursday, October 31st.
- Only one submission per person.
- The winner will get all of the Vult commercial collections. Here's more about Vult - https://modlfo.github.io/VultModules/
- Feel free to build a patch in any genre/style you want.
- If you're not sure about something, please ask.
- Good luck and have fun!

If you like what I do and want to support my work, consider joining my crew on Patreon - https://www.patreon.com/omricohen"

Improv #13 for VCS3, Arp 2600, Mellotron and Fender Rhodes

Published on Oct 18, 2019 R. Reger

"One-take improvised piece for VCS3 (4 different patches), Arp 2600, Mellotron and Fender Rhodes."

Duet - A dual oscillator dual LFO USR oscillator for your KORG 'logue synthesizers!

Published on Oct 18, 2019 hammondeggsmusic

"Available at https://hammondeggsmusic.ca/logueplug...

Duet, is a dual oscillator, dual LFO user oscillator for your KORG minilogue xd, prologue, and NTS-1 synthesizers. It can be a dual sawtooth, or saw+PWM. This very flexible oscillator can evoke some familiar sounds, and let you explore some new ones too!"