MATRIXSYNTH

SUZUKI Q Chord QC-1 w/ 6 Carts & Case

Note: Auction links are affiliate links for which the site may be compensated.

Synth Stuff Ep. 64 - Roland GAIA SH-01

Published on Jan 5, 2020 tritonrecordings

"A friend let me borrow this virtual analog synth to film for Synth Stuff and it's a bit of a nostalgia trip because I used to have one years ago. In fact, the announcement of the Korg MS-20 Mini in 2013 is what made me sell it to get some funds together. I dig the look of it - sort of NASA-like. The sound? Well, it's not my favorite VA out there but if you get past the awful dance/EDM presets, there are great sounds to be had here. The "three layer" architecture is really cool too. My biggest gripe with it is that it's incredibly overpriced...even after being on the market for so long now."

Cory Flanigan - "You can report me all you want to"

Published on Jan 4, 2020 suitandtieguy

Cory Flanigan - drums and electronics
Bubba Ayoub - video

Produced by STG Soundlabs. Performed and recorded without computers. Special thanks to Nathan Hahn for camera angles.

Cory Flanigan:
http://coryflanigan.com/

Bubba Ayoub:
http://www.instagram.com/juggableoffe...

Nathan Hahn:
https://www.youtube.com/channel/UCQeS...

STG's Roland Juno-60 with MD-8 MIDI-DCB interface

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This Juno-60 is fantastic. Every slider is lubricated, all functions checked and working. DCB interface box is barely used and in mint condition with supple rubber on the cable. (I used the Juno-60 with the internal arpeggiator and external clock 99 percent of the time.)

It's been used on 10 years of recordings on my Bandcamp page if you want to check them out ... suitandtieguy dot bandcamp dot com. It breaks my heart to have to sell this but I have a very beat-up Juno-6 which Bela Fleck signed back for me back in the mid-90s that I'm going to rebuild and that is going to be the one for the long haul for me."

CLICK FOR MORE »

Displacement - Morphagene, Microcell, Mimeophon

Published on Jan 5, 2020 Omri Cohen

"This is what happens when you record a short piano loop into those 3 modules...
Here it is on Spotify, iTunes, and more - https://distrokid.com/hyperfollow/omr...

If you like what I do and want to support my work, consider joining my crew on Patreon - https://www.patreon.com/omricohen

You can get the WAV file and stems on my Patreon page - https://www.patreon.com/posts/32859597"

Voxglitch XY Module for VCV Rack

Published on Jan 5, 2020 Bret Truchan

"Demo of my new XY controller for VCV Rack and how I use it with the Repeater module. All these modules are still under construction but can be found on my github page at https://github.com/clone45/voxglitch."

Update:

Voxglitch XY Module - Punch Recording

Published on Jan 5, 2020 Bret Truchan

"Quick video to show how to use the new punch recording switch recently added to the Voxglitch XY Module on VCV Rack."

Album track improvisation/performance (Eurorack Analog Jamuary)

Published on Jan 5, 2020 DreamsOfWires

"Something I'm working in for the next 'tomorrow the cure' album, just a rough, improvised, preliminary version, so it may change a lot, but this is my work flow nowadays. The album will be all live/real-time recordings, just like the last one.

LIVE SHOWS: I'll be performing a short live set at this year's Superbooth 20 in Berlin, in case anyone was thinking of going. It's a very big event with lots of vendors and new gear to drool over.

PATCH BREAKDOWN: All synth sounds are from an AJH Synth Eurorack Modular system, which is used here as a 2-voice instrument.

The drone sound is one VCO passing through the Wave Swarm, then into the Ring SM's mixer, where 2 sub-octaves and an upper octave are added from the Ring SM itself, plus pink noise from the Glide + Noise module. The combined output is passed through the Sonic XV filter, where the wave-shaping functionality is used to alter the timbre of the sound significantly, and the cutoff frequency is adjusted manually throughout the recording. The amount of noise at the Ring SM is also reduced early on, then increased at the end.

The lead sound is 2 VCO's (square waves with PWM), the pitch of one is being shifted down 2 octaves or up 9 notes at various points in the recording by the Precision Voltages module, which provides convenient, instant selection of chosen note intervals. The sound is then filtered by the Ladder Filter, and is also used for the 'arp' sequence in the final part of the performance. Throughout the performance the envelope's modulation of the filter is being manually tweaked.

MY MUSIC: My existing analog synth albums can be found here: https://tomorrowthecure.bandcamp.com
GEAR USED: Recorded on an iPad using AUM, Dubstation2 delay, and ShimmerFX reverb. Video assembled on an iPad, which isn't easy, and lacks storage space, hence no additional footage as was common in my earlier videos. If or when I can get my MacBook repaired I'll return to making videos more similar to those I've made in the past. Fortunately my camera still works :/

SUPPORT: Help support my channel by purchasing my music or sponsoring me on Patreon: https://www.patreon.com/dreamsofwires

For all creative updates/info check here: https://www.facebook.com/tomorrowthecure
Thanks for your support.

#ajhsynth #dreamsofwires #jamuary"

Man at Work

Published on Jan 5, 2020 Vykaar Tones

"Mutant bass and snare with diy cowbell circuit shaping jupiter storm noise and ring modulated vco. Bass octaves are Moog mother_32 and Boomstar 4075. Tuned fourths and fifths are Model-d and Pro~1. Later Dark Energy modules are mixed in. CR8000 cymbals and hand claps. Formant noise bursts."