More 830 noodles.

video upload by Michigan Synth Works

"MSW Chronovore (TB-303 Sequencer) driving TR606 + 830. Note the secret OHH decay feature of the 606, this happens when synced externally since the decay time is set by the internal tempo, not the external tempo"

Follow-up to this post.

Loom: Upgraded Action Zone

video upload by Aodyo Instruments

"This video showcases the upgraded Action Zone, now with X axis control in addition to the existing Z pressure axis. This upgrade offers yet another dimension of expressiveness and playability for your Loom.

This is the result of a process that started way before the Kickstarter launch, during the early development stages. Initially, we aimed to include a two-dimensional action zone, but we faced design challenges that led us to postpone this feature.
With tests and feedback with the Kickstarter prototypes, we could quickly hone in on a seamless solution that integrates effortlessly.
To accommodate this new feature, we've slightly widened the Action Zone. This adjustment not only optimizes the use of the new X axis control, but also facilitates two-finger playing techniques. Consequently, we've updated the visual design on the left side of the Loom, moving away from the large Aodyo logo. We look forward to unveiling these new visuals in June."

DRONES MAX

video upload by HOME BAKE INSTRUMENTS

DRONES MAX is a WAVE TABLE SYNTHERSIZER for sustained sounds. It has three WAVE TABLE OSCs and two POLE FILTERs, which can be modulated by two LFOs. Powerful effects include stereo delay, reverb, and crusher with a wide range of parameters, allowing for a variety of expression from aggressive and intense sounds to beautiful cosmic harmonics.

WAVETABLE

Over 200 waveforms are recorded, and you can change them smoothly. Also, at the end of the knob is a sawtooth waveform, a sine waveform, and a frequency-varying noise generator. WAVETABLE has a mixture of waveforms that contain different harmonics, and when combined with an LFO, it can create the effect of gradually changing musical scales.

OSC MIX

You can set the volume ratio of the three oscillators.

NOSIE

Adds noise to the oscillator output.

FILTER

DRONES is equipped with a 2POLE low-pass filter with resonance. Turning the CUTOFF knob to the left attenuates the high notes, and when turned all the way, no sound is produced. Turning the RES knob to the right will cause a peak to occur at the pitch at the cutoff point.

LFO

DRONES has a built-in LFO that can output sine, sawtooth, square, and sampled and held random waveforms. The LFO knob sets the LFO frequency and waveform. Turning the knob to the right will speed up the frequency, and when it reaches the highest frequency, it will switch to the next waveform.

STEREO DELAY / REVERB

Equipped with stereo delay and reverb for drone sounds.

Feedback can be set to no attenuation, adding even more depth to the sound.

CRUSHER

By lowering the resolution of the sound, you can create harsher expressions.

live synth demo/pub - Korg Z1

video upload by SynthAddict

Soma Labs Flux - Highly Expressive New Instrument - Sonic LAB Presentation

video upload by sonicstate

"Soma Laboratory's unconventional design is a major factor in why their instruments are so unique. We take a look at the latest instrument Flux - which takes a lot of inspiration from the no touch approach of the original Theremin. However with the use of small magnets in each had there are five control axis per hand and up to 16 controllable parameters.
The instrument is loosely based on the Terra synthesis concept and features 37 digital algorithms which are treated like individual instruments with their own timbral characteristics.

The right hand controls the pitch, dynamic, octave and tilt (for timbral control) and the left hand controls more of the timbral character with a considerable amount of tonal range possible.

We talked with Vlad Kreimer who gave us an over view of how Flux works.
The first batch of production units will be going out later this year and the price they are aiming for is in the region of 1000 Euros + tax
More information at
https://somasynths.com/flux/

|--------|

00: 00:00 start
00:00:28 Playing example
00:01:31 Overview
00:03:20 synth engine
00:07:30 Pitch and dynamics
00:12:54 polyphony
00:18:28 external control
00:19:45 bass
00:20:40 UI
00:24:52 the magnets
00:25:38 percussive mode
00:26:40 other sizes?
00:28:09 price"

S-CAT Echo-Tone v.1.5 prototype test (may 2024)

video upload by Space Cat Audio Technologies

"The Echotone is being triggered from the TR-606 Low Tom output."

SYNTH-WERK - BODE Barberpole Phaser

video upload by SYNTH-WERK

"The BODE BARBERPOLE PHASER from SYNTH-WERK...source of sound is a SW 3P-2020 together with the SW 955-contact keyboard in polyphonic mode."

See the announcement post here. Note the price is now 3.200 Euro plus TAX.

Introducing: SetonixSynth Shaka-8 and Shaka-4 VC Stereo Matrix Mixer for Eurorack

video upload by SetonixSynth



"We are proud to announce the new Shaka-8 and Shaka-4! This demo contains a feature rundown and brief performance demo of these powerful modules.

The Shaka-8 is a Voltage-Controlled Stereo Matrix Mixer with an all-analog signal path. While it is similar in function to other Stereo Matrix Mixers, the Shaka-8 uses high quality audio VCAs to enable voltage control over each matrix patch point, i.e. the send level of each L/R pair of inputs to each L/R pair of outputs.

In addition to the 4 input and 2 output channels on the Shaka-8, the Matrix may be expanded to a 4x3, 4x4 or more matrix mixer by chaining Shaka-4 Stereo Matrix Expanders to the main unit via a 12-pin connector on the back of the Shaka-8. The Shaka-4 cannot be used without a main Shaka-4 unit.

The Shaka-8 and Shaka-4 operate in much the same way as a typical stereo audio matrix mixer, with the send level of each input to each output controlled by the corresponding knob, and the resulting “mix” being a sum of the knob settings in each column, added to the CV input corresponding to each knob.

For Eurorack users hungry for interesting new ways to route stereo or mono filters, oscillators, and effects, the Shaka-8 and Shaka-4 are sure to provide an affordable, flexible, and highly useful patching ecosystem to explore.

Available summer 2024 from SetonixSynth!"

Xaoc Devices Berlin

video upload by Xaoc Devices

Xaoc Devices Berlin: the oscillator that opens up the Leibniz Binary Subsystem

video upload by Tom Churchill

"On the surface, Xaoc Devices Berlin is a simple compact VCO offering square and saw waves with hard sync, FM input and octave switching. The most interesting part lies behind the panel and that is the Leibniz Binary Subsystem interface, namely LBZ out and LBZ in. The frontpanel LBZ LINK button and its corresponding gate input switch between the default saw wave and a signal that has been passed through any Leibniz module (or a combination of Leibniz modules) connected to Berlin. Add Xaoc Devices Jena for wave processing and the output is no longer a simple saw wave – you now have a vintage-style wavetable oscillator with a penchant for the experimental due to its open, hackable nature. Berlin operates in a way similar to the classic PPG Wave and Fairlight CMI synths and employs a variable sample rate of an extremely widerange internal clock. As the sample rate changes with the oscillator frequency, Berlin's internal square and saw waves exhibit no aliasing effect. The whole frequency range spans from 30 seconds in LFO mode up to 250 kHz (!) with the clock reaching an astounding 20 MHz. Add to that voltage control over all parameters and the result is a highly versatile module capable of creating a significantly diverse palette of unusual waveforms.

Xaoc Devices Berlin notable features:

– wide-range VCO with LFO mode (over 20 octaves of tracking);
– Leibniz Binary Subsystem interface;
– extremely widerange clock source;
– manual and voltage control over all parameters (including octave switching and LBZ LINK!);
– simultaneous Square and Saw/Leibniz wave outputs;
– extensive waveshaping potential when combined with Xaoc Devices Leibniz Subsystem modules, e.g., Jena or Rostock"

NanoSeq-9 Sequencer Synth

video upload by

"A four frequency/note sequencer/rhythm synthesizer.
Four frequency adjustment controls, note pattern changer, Low Pass Filter effect, tempo control.
You can get many different sounds and pulsing beats from the NanoSeq-9.
Standard 1/4" audio output jack, 2.1mm power adapter jack for external 7-9V power supply or 9V battery.

Please see more info at Tronicraft.com"

Another Demo of the NanoSeq-9:

Synthium in Solarium. NanoSeq-9 is a Sequencer Synthesizer in Blue Light Theremin

video upload by TroniCraft Instruments

"This is an improvised demo of some of the things the NanoSeq-9 can do. It has two photo sensors that modify the frequencies.

The NanoSeq-9 is a digital sequencer inspired by LoFi, chip music, circuit-bending and retro video game sounds."

Update: pics via this listing on eBay.

CLICK FOR MORE »