"Erica Synth "Pico Drum" into TouellSkouarn Sonveskañ {Germanium 3XMixer preamp Feedbacker}. Patching the 3 chanels in serie... playing with gains and feedback switches."
3 Discrete Preamps
3 Channels Mixer
3 CV Controlled FeedBacks
EQ High/Low
Direct Out / Mute
16 HP · Alu/red panel
+12 : 0mA
-12 : 10mA
"Volt is a new iPad synth app with AUv3, Audiobus, and MIDI Polyphonic Expression (MPE) ... but you might have missed it because it came out the same week as Minimoog! I thought it deserved some attention, because Numerical Audio's built-in effects make for instantly satisfying patches. Available on iTunes: https://goo.gl/KU6kZR
If you've enjoyed this series please consider supporting it by becoming a Patreon: https://www.patreon.com/discchordIf you'd prefer to help on a monthly basis, instead of per video, there is a monthly Patreon campaign: https://www.patreon.com/discchord_com (Patrons of both campaigns get the same benefits, including Ad Free viewing on the site!)
"Glitchmachines released this week Palindrome, a granular morph plotting plugin with 4 sampler modules for PC & Mac. Here a quick sound demo with new designed sounds.
Support SYNTH ANATOMY over Patreon and get access to free sound content (sample & preset libraries, free plugins... & participate on exclusive giveaways) https://www.patreon.com/synthanatomy"
"I just created a controller template for Korg’s iElectribe on iPad, an 8-part digital drum synth with FX. This allows the 8 MIDI tracks to individually control and sequence all 8 sounds in the app. Every channel is mapped to edit Pitch, Mod Depth, Mod Speed, Decay, Level, and Pan of each sound, plus there are global controls for the FX, Tube Gain, Accent Volume, and Master Volume embedded in tracks A-C. There are quite a few other CCs available but I felt they were most efficiently accessed from the iPad because a lot of them only respond to 2-8 different values, which would be cumbersome on the Digitakt.
You’ll need some kind of SysEx transfer utility such as C6 for desktop, or SysEx Base for iPad (highly recommended).
Inside the zip you’ll find four files:
iElectribe Init - blank pattern with values centered or zeroed
iElectribe Demo - quick demo pattern using the CCs to create a “virtual patch” and sequence
iElectribe Map - image of the control map for each MIDI channel
Readme - just a note with my PayPal address in case you feel like sending me a donation 😀
Note: Auction links are affiliate links for which the site may be compensated.
Published on Mar 25, 2018 Football Planetz
Warning: some clipping in this one so don't turn it up too loud.
"Recorded directly into my phone (using a line-in cable, so it is recorded in mono), with no processing or editing. Weird that the video & audio goes out of sync at the end of the whole clip.
I am selling this particular VL1-m (has a new cool blue LCD just replaced), so I recorded the demo songs to show what this baby can do"
"If you have not played with a VL1 or VL1-m in the past, please check out the youtube video. This will give you an idea of its sonic capabilities.
LCD display had been replaced with a new cool-blue LCD, which is much brighter and looking great. The LCD is seated slightly higher than the original display due to mechanical mounting differences (please see pictures).
The new LCD has LED backlight, which does not need a high voltage converter used on the original backlight that can fade over time and was sometimes plagued with high pitched whining noise coming from the high voltage converter.
New floppy drive also replaced, using NOS (New Old Stock) TEAC drive manufactured in 2010. To accommodate the new drive, a 34pin to 26pin floppy drive adapter is used (see picture). The original drive (which had a broken belt drive) used much older and uncommon 26pin flat cable, and a direct working replacement is nearly impossible to find. Please note the new floppy drive is unconfirmed for functionality because I do not have any new blank floppies to test. I got an old floppy disk from a friend which is probably 20 years old. The drive responds to read/format controls, and spins up but does not recognize the old floppy. Therefore I can't confirm the floppy drive is fully operational. If you do not want to use the floppy drive, the 34pin to 26pin adapter inside should allow you to replace the drive with a SD card reader emulator in the same form factor. That means you could put all the patch data available for download on the internet onto a single SD card for greater convenience.
120V version, which will take power between 100-120V (I was using 110V). I looked up the service manual, and the power supply has 2 part numbers (VS219600, marked J,U. And VS219700, marked H,D,B,A). The marking J,U means Japan, USA. So this unit is definitely designed to work between 100-120V." [image below]
"You already know what this is. If not you must have been living under a rock for 40 years. If so I don't need to tell you what it does or how it sounds. This is THE king of drum machines. As you can imagine it's a sad day for me selling this baby. But baby twins are expensive.
This was my OG baby and I've had it since the early 2000's, it is a little quirky with some buttons not working unless you press the later 13,14,15,16 once lit up will work but probably need a little work.
It is totally functional and works fine. Or money back.
I have had it midi modded and it does work but I can't remember the exact midi notes, its channel 10 and I believe the same notes as the first bank of an mpc2000xl pads, so one foot switch port was sacrificed for that. I can't 100% guarantee it's working but someone buying this will probably be analog synthy modular minded and know how to fix it. It was originally done by mungo if that means anything to anyone."
"This is a rare Cwejman s1 mk2 semi-modular synthesizer in excellent condition.
Original production run #047.
Fully functioning and calibrated.
This is the mother of the entire Cwejman EuroRack module line; a fully analog beast of a synth capable of an ultra-wide range of classic and modern sounds.
It is a self contained semi-modular synthesizer with midi, midi to cv conversion, extensive patching capabilities,1/4" unbalanced and balanced XLR outputs, professional switchable internal power supply, and much more..."
"thank you for over 1000 subscribers !!! that really makes me happy. enclosed a piece with 3 sequences from plaits. once sequenced live, once as a sample in the er-301 and once edited with the morphagene. the piece builds on a drone from the verbos harmonic oscillator. attention! a very slow piece. bring your time and enjoy listening. the world is fast enough."
1. drone /// verbos harmonic oscillator / mutable instruments clouds
2. voices /// make noise morphagene (radio samples from all over the world)
3. sequence /// mutable instruments plaits / lofi junky (sample er-301 sampling player)
4. bass /// sinus from er-301
5. sequence /// mutable instruments plaits / lofi junky (recorded and manipulated with morphagene)
6. sequence /// mutable instruments plaits (sequenced by malekko voltage block / delay from er-301)
7. effect sound /// orthogonal devices er-301 granular machine
8. field recording /// er-301 sampling player
sequenced by malekko voltage block. recorded live with tascam dr 100. no audio processing.
for the best listening experience listen to the video with headphones or good speakers."
