Gameboy Megamachine No.7 MORE GAMEBOYS, and Polyphony!

Published on Aug 22, 2019 LOOK MUM NO COMPUTER

"#gameboy megamachine is getting to the point where it isnt really #circuit bending or #chiptune ,. more like just an abomination haha.

info on juha and his github! :-
https://github.com/juhakivekas/midisp..."

LOOK MUM NO COMPUTER Gameboy Megamachine

New Blue on White Korg Polysix Metal Panel Cases by Synthronics

via synthronics.de

"Polysix synthesizers normally have worn and rusty metal panels with scratches on paint.

It was decided to re-manufacture the WHOLE metal panel incl. new paint coat and new silk screen printing.

The paint coat (in comparison to original panel) ist on both sides, so the panel will not rust nowhere.

All silk printings are as close as possible to original to preserve the original look of this great synth.

Printed texts „1 OCT DOWN“ and „2 OCT DOWN“ of the SUB OSC switch stick out of the violet rectangle around 0,5mm. This small defect is present on all panels.

CLICK FOR MORE »

New Arturia Keystep update - New Sequencer tricks!

Published on Aug 21, 2019 Gaz Williams

"Here I take a look at the recently released v.1.1 free firmware update for everyones favourite midi and CV controller, the Arturia Keystep. I have it hooked up via MIDI to my Dreadbox Abyss to demonstrate some of the funky new features. I haven't fully figured out some of the new stuff especially the random modes within the arpeggiator so instead I focus on the new sequencer stuff."

Roland Juno 60 sound demos

Published on Aug 21, 2019 MIDERA

"Borrowing a friend's Juno 60 for a while, thought I'd make a few sounds and give it a good test drive. I didn't use Chorus in any of these patches, to be honest, I don't really like Chorus except on guitar (and even then, I prefer delay, so... I don't know?). It's a beautiful synth, but I think I'm OK not owning one personally."

Some distortion between 5:50 & 7:10.

Custom Blue on White Roland JD-800 Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Right now all the Leds are blue. The bender is a lighted bender. Will add some photos of it on. Customer decided to return in the middle of the project. Currently there is no sound coming from the output. But it turns on beautifully."

CLICK FOR MORE »

Genoqs Nemo Midi Performance Sequencer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"It has been updated with the latest Os, CE edition.

This updates it to twofold.
The tracks, pages and concurrent pages are doubled, 4 to 8.

As it has the same innards as the bigger brother octopus."

CLICK FOR MORE »

MATTHS (Matt Hodson) LIVE @SUPERBOOTH19 PART 2 & 3

Parts 2 & 3 of MATTHS (Matt Hodson) LIVE @SUPERBOOTH19 have been added to this post.

Analogue Solutions PRO TIP: Impulse Command Controlling Pitch via the 16-Step Sequencer

Published on Aug 21, 2019 rezfilter

Impulse Command in blue!

"Analogue Solutions Impulse Command PRO TIP!

The IC's 16-step sequencer is primarily used for modulation since the MIDI Loop sequencer would ordinarily be used for note control.

However, you can patch (with a cable!) the sequencer output to
the Pitch control input jack if you want the step sequencer to also control pitch.

Have fun!"

Yamaha CS-60

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

First Impression of Korg Volca Nubass Vacuum Tube Bass Synthesizer

Published on Aug 21, 2019 BAMTV

"In this video I, Marc, give my first impression about the new Korg Volca Nubass vacuum tube tynthesizer. The Nubass is a bass synth with a sound source based around a vacuum tube oscillator."