Rare Clef B30 Microsynth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

This one was spotted and sent in via Florian Anwander

Note the knobs on these are usually colored as you can see in previous posts here.

CLICK FOR MORE »

Yamaha QY70: How to modify the sounds using a MIDI controller

video upload by Floyd Steinberg

"Here's a video on how to set up a MIDI controller to tweak the sounds in a Yamaha #QY70 or #QY100 (battery powered sequencers/#synthesizer modules). I already briefly talked about this in my QY100 video but you kept asking so I made it a seperate video. Table of contents:

00:00 hi
00:19 hardware setup
00:59 firmware setup
01:19 reading the manual ;-)
01:29 parameter list (pause for details)
01:48 parameter assignment
02:12 important considerations
02:32 demo
05:19 byebye

HÄLP ZIS CHANNEL
https://www.patreon.com/floyd_steinberg
https://floydsteinberg.gumroad.com/
https://floydsteinberg.bandcamp.com/"

short glitchy drum sound design on Gotharman's LD3

video upload by Meska

"Sonic exploration around small/short glitchy drum sound on gotharman's LD3

Thank you for watching.
My name is Meska of the statik collective . I've been making mostly "dark and expérimental" music for more than ten years now, i'v learn so much online, now it's time for me to share my knoledge, my exploration and this channel is a place to talk about the tools, sound design and techniques to make music with.

You can stream my albums and EPs at https://statikwave.bandcamp.com/

If you'd like to support the channel​ consider buying music from bandcamp ;)"

SynthPlex Sun. - solar techno bus tour

video upload by SynthAddict

"solar techno bus for mobile jam parties
pretty posh..."

And one from sonicstate:

SynthPlex 2022: LA Good Vibe - Mobile Solar Recording Truck

video upload by sonicstate

"LA Good Vibe is a solar powered mobile recording truck, with the ability to go completely off grid, enabling some incredible locations for recording. Its a private facility created by Joachim Garraud, designed (we think) to enable him to live the dream, collaborate and demonstrate that its possible to go off grid and use 100% renewable energy (assuming you have a few $$ to set it up)

Jim took a tour around the studio based inside a large truck, custom fitted for the purpose. Joachim seems to be up for collaborations and interesting opportunities, so check it out at:

https://www.lagoodvibe.com/"

Access Virus TI2

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Oberheim Matrix 6

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Upgraded to the lastest firmware with the Tauntek Chip.

Functionally is excellent condition."

CLICK FOR MORE »

Oberheim Matrix 6R

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"It has been recently serviced with an updated OS ROM chip [for better midi response] and a brand new high quality save battery.

This listing includes the original instruction manual as well as the original patch cassette that was manufactured by Oberheim (also in great condition!)."

CLICK FOR MORE »

Palmelund Synthesizers Ampel

via this auction

"Designed to work with the Ciat-Lonbarde family in mind but will work with all sorts of banana synths.

----------

- Banana nodes follow the Ciat Lonbarde color scheme (mostly) warm colors are outputs, and cold colors are inputs, (i consider grey a cold color)

- Outputs are 0-9V

- Output gates can be staked to produce CV. but if a gate output is used in a stack, it might not work with a logic input, luckily there are plenty gate outputs., 8 on each of the first 3 modules!

(The two LFO outputs are lower impedance and isn’t as suited for stacking, but the rest of module 1,2 and 3 outputs are great for stacking)

-Power supply: 12V dc center positive 5.5mm/2.1mm. (same as CL).

The modules (left to right):

1. LFO / DIV: are two clocks (LFOS) with a logic output and a sync input. And a clock divider with an input and a reset.

2. A shift register, upper banana is clock input, lower is data input. Upper button is force input high, lower is force input low.

3. Is a magic sunset scene with sparkling stars.

4.You put 3 gates in, and they will choose one of the 8 pots and output a cv at the warm node, corresponding to that pot.

Patching tips!

The base idea was this:

Clock the logic shift register and sunset with the 2 clocks, obviously there are only 2 clocks, and 5 inputs. So use their own logic outs and cross patch them. Take a random logic and and feed the clock divider with it. Take a division and and input it into one of the sync inputs. If you wait, the device will now fall into a repeating, but often quite chaotic (depends on the patch) rhythm. Choosing a bigger or smaller division, or a logic that fires more often or less often sets the repeating length. Adjusting of the clocks slightly might change the sequence completely, and you might not get it back!.

Take your 3 favorite logic gate signals and patch it to module 4 and send it to something (could even be one of its own inputs) and stack a few of the unused gates and send it to something else."

System80 880 Eurorack Drum Machine

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

HOW TO MAKE: Thom Yorke - VOLK sequenced by Ground Control played on Roland JV and GHOST

video upload by Endorphin.es

"If anxiety had a sound, how would it sound like?

This spooky season we are fully enchanted by @Thom Yorke's soundtrack for 'Suspiria' movie (2018) and we decided to to recreate this amazing masterpiece on our rig made using Ground Control as a sequencer, Roland JV1010 as a multi-timbral synth voices and the GHOST as our end of chain master effect processor. With its hypnotic 10 step poly meter sequences and demonic scales, morphing effects and creepy sounds you are guaranteed to have goosebumps!"