Hainbach - Vive

video upload by HAINBACH

"Here is the second single of my upcoming album 'Vive' on Seil Records. Stream it now everywhere. Thank you for listening!

MUSIC: http://hainbach.bandcamp.com"

matrix note: Some synth spotting with HAINBACH. You can find a studio tour with Anthony Marinelli here.

EMW VPoly 6X: Pads, Strings, and Analog Sounds in a Brazilian VA Synth Module

video upload by Marcus Padrini

"The EMW VPoly-6X from @emwsynthesizers is a Brazilian polyphonic VA synthesizer, in module format, inspired by the classic Korg Polysix.

I had the opportunity to follow part of the development, test different prototypes, and contribute some ideas to the project. In this video, I show in detail how the VPoly works, its construction, its voice modes, effects, timbre editing, and, most importantly, how it sounds.

The VPoly 6X has six voices of polyphony, an oscillator with sub-oscillator, a multimode filter, envelopes, LFO, different polyphonic and monophonic modes, and an effects processor with chorus, ensemble, phaser, delay, and Bloom.

I also show the Spread, an independent feature that distributes the voices in the stereo field and adds small variations in pitch, creating broad and immersive sounds.

In this review you will see:

00:00 Introduction
01:03 What is the VPoly 6X?
01:51 Connections and Panel
02:52 Demo 1 - Valiente (Synth Keys)
03:20 Demo 2 - Deep in Mind (Pad)
04:03 Demo 3 - Soft Pad
04:47 Demo 4 - HPF Pad
05:38 Demo 5 - Bright Warm (Pad)
06:36 Demo 6 - Uni Bass
06:53 Demo 7 - Odyssey (Lead)
07:31 Demo 8 - 3OSC Lead
08:07 Demo 9 - Seasons Brass
08:38 Demo 10 - Synth Clav
08:58 Demo 11 - Saw Keys
09:44 Website with presets
10:22 Creating and editing sounds
13:55 Favorite Presets Function
15:08 Shameless plug! Synth Course
15:57 Voice Modes
19:11 Effects Processor
22:48 Spread is Life!

26:10 VPoly is Musical
27:50 Limitations
29:03 Conclusion
30:47 Acknowledgements

The unit shown in the video was still a prototype. Therefore, some details may be different in the final version sold by EMW.

Learn about my subtractive synthesis course: https://www.udemy.com/course/sintetiz..."

Also see New EMW VPOLY-6X | Hands-On Demo & Sound Showcase

New EMW VPOLY-6X | Hands-On Demo & Sound Showcase

video upload by EMW Synthesizers

"EMW presents the VPOLY-6X, a new virtual analog synthesizer module designed to deliver inspiring sound with an intuitive workflow.

Featuring innovative technology, a clean and practical interface, and a powerful analog-style sound engine, the VPOLY-6X lets you focus on creating music instead of navigating complex menus.

Simple to use. Fast to program. Big, expressive sound.

Demo by ‪@MarcusPadrini‬"

EMW - Patch Synthesizer – Create & Modify Sounds Instantly (Juno, DW-8000, JX-8P & More)

video upload by EMW Synthesizers

Previous incarnations of the EMW Patch Synthesizer were featured here back in 2014 and 2011.

"Discover the Patch Synthesizer, a powerful tool designed to generate and transform sounds on classic MIDI synthesizers. In this video, I demonstrate how it works, including both Create and Modify modes, and how you can quickly explore new sounds without complex programming.
More info: info@electronicmusicworks.com
www.electronicmusicworks.com"

EMW WCS-X – from Test to Track (Part 2)

video upload by EMW Synthesizers

"This is the next step in the track that began as a simple lab test.
We continue building and arranging the music using the WCS-X, with simple hardware processing and a few effects inside the DAW.
This isn’t about a perfect mix, it’s about exploring sound and ideas."

Follow-up to this post.

WCS-X - Just a Lab Test… Until It Wasn’t

video upload by EMW Synthesizers

"This was made using only the WCS-X, a simple mixer, and an old-school audio editor. From here on, the idea is to keep adding more tracks using the same setup, nothing else."

EMW WCS-X Oscillator Demo – Wavetables, LFOs, AD Generators, PWM modulation & Sync

video upload by EMW Synthesizers

"This video demonstrates the oscillator section of the WCS-X synthesizer, focusing on its waveforms, LFOs, PWM/Wave shaping modulation, Vintage effect character, and Hard Sync behavior.
All sounds are generated directly by the WCS-X. The demo highlights the raw tonal character of the oscillators as well as their response to modulation and oscillator interaction."

WCS-X – Firmware Update | New Patches & New Features

video upload by EMW Synthesizers

"The WCS-X has received a major firmware update, introducing a wide range of new features and sonic improvements that significantly expand the synthesizer’s capabilities.

Among the highlights are Oscillator SYNC, PWM and Wave Folding, independent Attack/Decay generators per oscillator for pitch modulation, and a new Vintage parameter that adds warmth and character to the sound. Patch memory has now been implemented, allowing up to 128 patches to be stored directly in the instrument.

The update also introduces a new LFO with 15 waveforms, as well as new modes for Glide and Gate type, offering more expressive control and flexibility in performance and sequencing.

This short video showcases some of the new patches, demonstrating how these new features can be used in real sounds and musical contexts.

We believe this marks the final firmware version — and more news is coming soon 👀 Stay tuned and enjoy the sound! 🎶✨"

EMW WCS-X Synthesizer Update: Transient Sample Player

video upload by EMW Synthesizers

"This video showcases the new transient sample player added to the WCS-X.
The transient module can replace Oscillator 3, allowing you to choose between three oscillators or two oscillators plus transients. With a library of 64 transient samples, it adds a new layer of attack, punch, and character to the sound.
Thanks for watching!"

Casio FZ-1 – Installing the New OLED Display Kit

video upload by EMW Synthesizers

Addtional EMW Casio posts

"INFORMATION

The project works perfectly for normal use of the FZ-1, FZ-10M and FZ-20M. All menu screens, editing pages, sampling functions, parameters and general operation display correctly. Only a few fully graphical screens, such as Hand Drawing, Sin Synthesis and Graphic Envelope, may show minor pixel irregularities. This does not affect usability in any way; these functions continue to work normally and the issue is purely visual.
As I no longer have time to continue development, I do not plan to refine these small graphical details. Even so, the kit leaves the FZ fully usable, which is exactly what allowed me to bring my own FZ-1 and FZ-20M back to life and use them normally again.

FZ-1 Kit

For the FZ-1, we supply a complete kit, including:
A dedicated support with the logic board.
A second support with the new OLED display that fits perfectly into the original display mounting position.

Installation requires no soldering and no special skills. The kit uses the original FZ-1 mounting screws, and the entire installation can be completed in under 20 minutes.
Please watch the FZ-1 installation video on our YouTube channel for a full step-by-step demonstration.

FZ-10M and FZ-20M Kit

For the FZ-10M and FZ-20M, we supply a single integrated assembly including the support, logic board and display. This assembly fits perfectly into the original display location of the module.

Installation is very simple, requires no soldering, and typically takes around 15 minutes. The process is also demonstrated in the installation video available on our YouTube channel.

Pricing and Ordering

The price for the kit (logic board, display, supports and cables) is US$249.00 + shipping.

CLICK FOR MORE »

EMW WCS-X – External FX Demo

video upload by EMW Synthesizers

"Here’s a new round of sounds from the upcoming WCS-X, this time running through a chain of external effects. The goal here is simple: show how far this little synth can go once you open it up to a wider sonic palette."

EMW Introduces the WCS-X - MINI SYNTHESIZER

video upload by EMW Synthesizers

3 digital oscillators (30 waveforms each) + noise
Analog VCF (Band-Pass / Low-Pass)
Analog VCA
Analog LFO
Analog ADSR
Adjustable glide
Pitch modulation via LFO

CASIO FZ-10M / FZ-20M New OLED Display connection.

video upload by EMW Synthesizers

"The project works perfectly for normal use of the FZ-1, FZ-10M and FZ-20M. All menu screens, editing pages, sampling functions, parameters and general operation display correctly. Only a few fully-graphical screens — such as Hand Drawing, Sin Synthesis and Envelope — show small pixel irregularities. This doesn’t affect usability at all; those functions still work normally, it’s only a visual detail.

Since I no longer have time to continue development, I don’t plan to refine those small graphical variations. Even so, the kit leaves the FZ fully usable, which is exactly what allowed me to bring my own FZ-1 and FZ-20M back to life and use them normally again.

For the FZ-10M and FZ-20M, the kit is supplied already mounted on a dedicated support/bracket. You simply remove the original display module and install the new assembly in the same place, as shown in the video. This makes the upgrade very straightforward for these models.

For the FZ-1, I provide the logic board, the display and the cables for connection. In this case, the internal mechanical mounting and support are left to each user, who can adapt the installation to their own unit. It’s not difficult, but it does require some basic DIY skill.

The price for the board, display and cables is $199.00 + shipping. The payment must be made to our PayPal registered account: info@electronicmusicworks.com

If you are interested just send an email to: info@electronicmusicworks.com

Note: We are currently unable to ship to the United States, as our mail service is still adjusting its system to the new tariff policies."

CASIO FZ-1 / FZ-10M / FZ-20M New OLED Display

video upload by EMW Synthesizers

"Here is a quick demo of the Casio FZ module in operation using our OLED display kit."

EMW - NOISE BANK Eurorack Module

video upload by EMW Synthesizers

"Some great sound atmospheres and effects created by our new NOISE BANK Eurorack module.
It features 150 types of noise, various trigger options, and pitch control."

EMW - STEREOLIZER PROCESSOR Eurorack module

video upload by EMW Synthesizers

www.electronicmusicworks.com

EMW MINI-3 Oscillator Bank - Initial test (RAMP)

video upload by EMW Synthesizers

"EMW MINI-3 – New Eurorack Module (8HP)! A compact MIDI oscillator delivering the iconic punch and power of the legendary Minimoog oscillator bank."

Nothing v2 - Electronic Pop Music

video upload by POPTRONIC

"2025 remastered version, featuring EMW's System 15 Analog Synthesizer."

POPTRONIC is the man behind Electronic Music Works / EMW: https://www.electronicmusicworks.com.

You can find additional posts featuring EMW's System 15 here.

WORDS - Electronic Music

video upload by POPTRONIC

The above is a rework of a 1996 track by EMW's (Electronic Music Works) Paulo S. Santos aka PS Project. The piece features some of his ear VCF progject: "I'm excited to share that I'm launching a musical project featuring a remastered version of a track I composed many years ago, titled 'WORDS.' This piece showcases sounds from my early VCF projects."

YouTube description follows:
"WORDS A 1996 electronic track reborn. This newly remastered version bridges past and present in a hypnotic audiovisual journey. Enjoy!

Created and recorded by Paulo S. Santos (PS Project)."

EMW WCS-1x

Note: links to listings are affiliate links for which the site may be compensated.

via this listing

"EMW WCS-1x Digital/Analog hybrid monosynth in excellent cosmetic and fully functional condition. I bought this after hearing it at a trade show. The multimode filter sounds amazing, super punchy and does incredible bass sounds, but also strange SH-03 style timbers.

The WCS-1x uses a DSP-based "Wave Composition Oscillator". The WCO's toggle switches allow you to access several waveshapes ( -including a fundamental square, a sub-octave, an "acid ring" waveform -which adds an aggressive edge to your sound, a sawtooth as well as a square wave -routed through either a bandpass or low pass filter -depending upon their respective toggle's position ). The WCO's toggle switches also allow you to select various octave settings ( +1 Octave, +3 Octaves or the fundamental's ). The LFO wave toggle allows you to select either a triangle or square wave for modulation purposes. At the top left corner of the WCO section is a MIDI channel button ( -with a "Gate" and "Learn" LED ). Next to it, you'll find a glide + and - ( portamento ) toggle switch. An unconventional arrangement but it works once you get used to it.

The remainder of the WCS-1x's controls are more straight forward knobs. You get one each for filter cut-off, filter resonance, filter envelope modulation, filter LFO modulation ( amount ) with the last knob to the right controlling the LFO's frequency. Below the filter section you'll find four knobs for controlling VCA attack, decay, sustain and release envelope segments. The knobs have a smooth, rock solid feel as you turn them."