via Elhardt:
"I created a really good cymbal patch on the Jupiter-8 about 25 years ago. I
was lost when the backup battery went dead. I finally got around to
creating it again today. I takes advantage of the JP8's unison mode to turn
a whimpy metallic sound into a thick metallic harmonic spectrum leading to a
realistic sounding cymbal. MP3 below. First is the sound with unison
turned off completely dry, then with it turned on completely dry, then the
same sound with a longer decay and some reverb."
JP8_Cymbal.mp3
Showing posts with label KH. Show all posts
Showing posts with label KH. Show all posts
Tuesday, August 11, 2009
Friday, August 07, 2009
Polymoog Resonator Section
YouTube via Elhardt. follow-up to this post.
"This is an unplanned demo I threw together today of a Polymoog 3 Band Resonator that I ripped out of my Polymoog and built into a stand-alone unit for processing sounds. It consists of three filters in parallel which all be switched to lowpass, bandpass, or highpass modes. Each filter has three controls: frequency, resonance, and amplitude. It's one of the unique things about the Polymoog synthesizer which you don't find in any other polyphonic analog synth.
What happened to the rest of my Polymoog? I used the Polymoog case to built a coffee table, of which you can see a few pictures at the end of the video. That was sold off. The rest of my Polymoog was sold for parts to quite a few people. My Polymoog just had too many problems to bother putting in the time and effort to fix."
Monday, August 03, 2009
Polymoog 3-Band Resonator for Sale/Auction
via Elhardt on the Moog Forum
"I've been going back and forth as to whether I want to sell this thing because even though that was my original intention, the end result is a beautiful, one-of-a-kind, stand-alone unit, that I put quite a bit of work into extricating from my Polymoog and getting it built. It's essentially a 3 Band Variable Formant Filter for all kinds of tonal modifications, similar to the Polyfusion module that somebody just put up on ebay, but the Polymoog Resonator can also switch the filters into lowpass and hipass modes in addition to bandpass, and it covers a greater range of frequencies. See links for Polyfusion comparison:
[http://matrixsynth.blogspot.com/2009/08/rare-polyfusion-modular-moog-format.html - note the original link went to the Polyfusion formant filter auction, but that will expire in time so I added the post link]
http://www.flickr.com/photos/matrixsynth/30931197/
I was originally going to put it up at $550 + shipping (Paypal preferred, I'm located in Cary, NC and can also be picked up for cash), but the only way to give more people a shot at buying it, since there's only one of these on the planet, is to allow them to bid on it if they want to pay more than that amount. So it goes up here at the initial bid of $550. If somebody offers that amount and nobody else bids, it's yours. I'll give it about a week (bid increments of a minimum of $10). For anybody not a member of the Moog Forum, you can email me with a bid and I can post that to the thread. If it doesn't sell, it will probably go on ebay, or maybe I'll end up keeping it for a while. A bunch of pictures are at the link below, and it includes everything you see in the 3rd photo down (Resonator, Power Supply, and a couple of 1/4" cables).
http://matrixsynth.blogspot.com/search?q=polymoogerfooger [Note this is a search on polymoogerfooger which will bring up this post as well. The prior two posts are here and here].
I can be contacted at my last name, which is my Moog Forum user name, same as my last name, followed by @att.net (just to avoid those internet scanning spambots) for those not registered on the Moog Forum who might have questions or want to bid.
-Ken Elhardt"
Sunday, January 18, 2009
Silverwood v3.0
on Native Instruments User Library
Free and recommended by Doktor Future in the comments of this post: "The SilverwoodV3.ens does many wind instruments, and is great with the EWI. MP3 here.
Description
"Breath controlled physical model brass, woodwind, and Hammond organ synthesizer
*** Update: V3 now includes a model of a Hammond organ. The model includes percussion, key click, chorus, harmonic foldback, and a set of drawbars that can morph from one setting to another. ***
Silverwood is a synthesizer that mimics acoustic wind instruments. It contains no oscillators or envelope generators. Instead, it creates sounds using waveguide physical modeling synthesis, and is activated by a wind or breath controller. It is monophonic.
Please note that without a wind or breath controller, Silverwood will make no sound. Update: V3 includes a 'KB Test' button, which when activated will trigger the model whenever MIDI note-on events are received.
Six physical models are included: brass, saxophone, clarinet, flute, recorder, and organ. After a sound is created by a model, it passes through an equalizer that mimics the bell of an acoustic instrument.
The snapshots include these acoustic instrument emulations:
Brass: Trumpet, Trombone, French Horn, Tuba, Cornet, Flugelhorn, Euphonium
Saxophones: Soprano, Alto, Tenor, Baritone
Double Reeds: Oboe, English Horn, Bassoon
Clarinets: Clarinet, Bass Clarinet
Flutes: Piccolo, Flute, Bass Flute
Other Pipes: Pan Pipes, Irish Whistle, Shakuhachi
Other Reeds: Uilleann Pipes, Scots Pipes, Accordion, Harmonica
Organs: Various popular Hammond settings.
Each snapshot responds to MIDI breath pressure (on CC2) and pitchbend data. Various other MIDI control sources are supported.
Snapshot names indicate the instrument’s natural range and the pitchbend effects. For example, the snapshot “Trumpet F#3-D6 +screech –falloff” indicates that the instrument is a trumpet, that it’s natural range is from F#3 to D6, that bending the pitch up adds screech, and that bending the pitch down adds falloff.
The sample mp3 demonstrates the oboe and bassoon emulations.
Many of the mouthpiece and bore designs are based on STK, created by Drs. Perry Cook and Gary Scavone.
The graphic control elements were created by Vera Kinter, at http://www.artvera-music.com, and were provided by Bernd Keil.
I wish to acknowledge these whose publications have assisted me in the creation of this instrument:
Dr. Jim Clark
Dr. Perry Cook
Mr. Kenneth Elhardt
Mr. Rob Hordijk
Dr. Toshifumi Kunimoto
Dr. Gary Scavone
Dr. Julius Smith
Dr. Vesa Välimäki"
Saturday, January 03, 2009
Polymoog Coffee Table Graphics
via Elhardt:
"In case anybody wants nice scalable graphics I drew up of the Polymoog synth's panel, I have pdf file links below. It's what I used for my coffee table. It took probably 2 to 3 full days of constant measuring and drawing in Corel draw. It's good for reference or you can send the file straight to your local printer and print a full size image to hang on your wall.
The 1st file I used the include fonts option option, but I never know for sure whether they're in there, or whether it's still using the fonts in Windows. It looks better on the screen at smaller sizes than the 2nd. The 2nd file is the same thing, but with fonts converted to curves, so it doesn't rely on fonts at all. That's what Express Printing told me to send them. The 3rd file is the same as the 2nd, but with the keyboard included, so for those who might want to make a polymoog coffee table, I've just saved you a bunch of work.
http://home.att.net/~elhardt3/PolymoogPanel_Fonts.pdf
http://home.att.net/~elhardt3/PolymoogPanel_Curves.pdf
http://home.att.net/~elhardt3/PolymoogPanelKeyboard_Print.pdf
-Elhardt"
mirrored here
Wednesday, December 24, 2008
Me & TC Helicon Singing Christmas Tunes
via Kenneth Elhardt on AH:
"Christmas related T.C. Helicon demos I several months back.
Short demo showing how to get a larger choir sound out of a T.C. Helicon Quintet being used like a vocoder.
http://home.att.net/~elhardt4/TCHelicon_RealtimeChoir.mp3
This demo was done monophonically overdubbing one voice at a time. 4 part polyphony, each part overdubbed 3 times for a total of 12 tracks/people.
http://home.att.net/~elhardt4/TCHelicon_OComeAllYeFaithful.mp3
An earlier test of my trying to sound like a boys choir, but do to not using compression there's a lot of unevenness, and it didn't turn out sounding like a big group. But since it's related to the Christmas season, what the hell.
http://home.att.net/~elhardt4/TCHelicon_Jerusalem.mp3
-Elhardt"
"Christmas related T.C. Helicon demos I several months back.
Short demo showing how to get a larger choir sound out of a T.C. Helicon Quintet being used like a vocoder.
http://home.att.net/~elhardt4/TCHelicon_RealtimeChoir.mp3
This demo was done monophonically overdubbing one voice at a time. 4 part polyphony, each part overdubbed 3 times for a total of 12 tracks/people.
http://home.att.net/~elhardt4/TCHelicon_OComeAllYeFaithful.mp3
An earlier test of my trying to sound like a boys choir, but do to not using compression there's a lot of unevenness, and it didn't turn out sounding like a big group. But since it's related to the Christmas season, what the hell.
http://home.att.net/~elhardt4/TCHelicon_Jerusalem.mp3
-Elhardt"
Friday, December 19, 2008
STAGEA ELS-01C Demonstration Movie - Horizontal Touch
YouTube via yamahacorporation
"Yuki Wada presenting the STAGEA ELS-01C."
via Kenneth Elhardt on the AH list:
"A lot of people would like polyphonic aftertouch on their synths. I've
always wanted horizontal touch for doing manual vibrato as that seems
potentially more useful. I thought that was gone with the old Yamaha organs
and the GX-1, but noticed in the Yamaha Stagea demo video at the link below,
they still have that feature. Go to the 1:58 mark to see how that works.
Now I have to wonder why they're not putting that on any of their synths!
Wish the Vax77 Keyboard people were doing this, or some other MIDI keyboard
manufacturer."
Update: Yuki Wada live:
Yuki Wada Lupin 3rd
YouTube via kyanhpham. "Ms. Yuki Wada's concert in Vietnam"
Saturday, November 29, 2008
Inside the Stand-Alone Polymoog Resonator - (Polymoogerfooger)
This is a follow-up to this post.
via Elhardt on the AH list:
"Now that I got the external power supply and other parts and finished it, I took a photo of the inside, back, and a new one of the front now that there's a red/green LED there which works just like the Moogerfoogers. That means it's green when the unit is enabled, and red when bypassed."
Tuesday, November 11, 2008
Stand-Alone Polymoog Resonator - (Polymoogerfooger)
via Elhardt on AH: "Preliminary pictures of a one-of-a-kind stand alone Polymoog 3 Band Resonator. Just one more thing my defunct Polymoog synth produced as I don't believe in wasting any part of a Polymoog. It makes a great external processing unit. After I get the finishing parts from Mouser, it will also have a red/green bypass/enable LED on the front panel and will probably go up for sale or auction if I can manage to part with it.
-Elhardt
Bahn Audio Systems Custom Design Division"
Thursday, October 02, 2008
Custom Printed Moog Stickers and a Polymoog Case
via Elhardt on AH:
"Since I'm going to be parting out my Polymoog, I figured my lid which is in almost new condition might be something somebody would want to buy to make their Polymoog look new. However, since day one that back Moog sticker was all scraped up (this was Moog's NAMM demo) making that part not look new.
So I spent several hours in Corel Draw, measuring and drawing up a new Polymoog sticker to replace the one there. Since the print shop has a minimum order cost, I had to print a bunch of extras including different sizes and colors, plus I went with the additional high-gloss laminated coating over the top which looks beautiful. Printed on Orajet vinyl stickers. So if anybody needs Moog stickers to replace damaged or missing ones on either a Polymoog, the back of a Multimoog or to replace the missing plastic logo on the front of a Multimoog, or if you just want a Moog bumper sticker, or to put Moog stickers on other manufacturer's gear to increase its value to Moog vintage prices, or for any other reason, then here's pricing and sticker details below. Note, if for some reason there's more of a demand than I expected, I can always have more printed up, including other sizes too, and even possibly with user requested text put right in the sticker, such as your name, synth SN#, etc.
Minimum order $6 Paypal, free mailing to US (and probably free to Canada and
Europe assuming mailing a letter isn't outrageous)
(1) $6, Polymoog Sticker 7" x 2-3/8" with the rounded rectangle around the edge. I have several in black, and one each in the colors at picture below. (2) $6, Polymoog Sized Sticker but without the white rectagular boarder. White logo, black backgrount. Looks stately without being pretentious.
(3) $4, Multimoog Back Side Sticker, Moog text is 4-3/16". Black background, White logo.
(4) $2, Multimoog Front Logo Plate Sticker Replacement, Moog text is 2-1/2" wide. Black background, White logo.
If your interested in purchasing, email me what you want so I can see if I still have any left.
-Elhardt"
Update: If you are interested you can contact elhardt, same name at att.net.
Wednesday, September 17, 2008
SMS-2000 Synth Expansion Box Wood Frame for Sale
via the synth hoax king Ken Elhardt on the SDIY list, the frame of the SMS-2000 is for sale. If you don't know what the SMS-2000, click here, scroll to the bottom of the page, click older posts and scroll down to the first SMS 2000 post. Don't miss the Bahn Sage while you are there. Some truly amazing work.
Notes via KH on SDIY:
"SMS-2000 Synth expansion box wood frame. If you build DIY electronics projects and want something a bit nicer than an ugly, unfinished looking plastic or aluminum box to put knobs/buttons on and electronics inside, then pictured below is a nice wooden frame. It fits a 10.5" by 7.75" piece of metal or whatever material your panel will be. See pictures below. Note that my router took a small chip out of the upper left corner as barely seen in the bottom image in the first picture below. Only held together by wood screws, so it can be taken apart and a refinished or laquered up for a glossy shine if one desires. $20 plus $7 postage for the lower 48 states, Paypal." More images here.
Monday, September 01, 2008
Sunday, January 20, 2008
Elhardt Synth Sounds Dissected
via Elhardt on AH. This is a follow up to the previous Elhardt posts.
"Since I am trying to reassemble my MOTM tracks of a train passing by to sync up to video of real trains, I might as well put up an MP3 where the separate tracks/sounds can be heard by themselves for those who are curious as to what makes up the final recording. It was all done on the MOTM modular synth plus about 5 different effects devices.
MOTM train dissected is here.
MOTM train with all sounds mixed together (has been posted before, but here for reference or new to those who haven't heard it).
Also, I was in the middle of a dialogue on another synth forum talking about the Alesis A6 when some people interrupted our conversation and also mailed to my inbox saying they didn't believe my A6 sounds (liquids and sitar) were synthesized, accused me of being a possible fraud, and they were going to spread the word that I fake synth demos unless I proved otherwise by posting the patches. I didn't have patches on my computer to send, nor did I really want to, so I recorded those sounds with me turning random knobs on the A6 to prove they're from the synth just to shut them up. I might as well get more use out of that mp3 before I pull it down in a few days since I've had some on this list make the same ridiculous accusations, so if you want to hear it, don't delay.
Here were the original demos they heard and questioned:
http://home.att.net/~synth6/MOTM_A6_Indian.mp3
http://home.att.net/~synth6/A6_Pouring_Water.mp3
http://home.att.net/~synth6/A6_Boiling_Liquid.mp3
Here is me turning knobs and showing they're synthesized. Note that the sitar sounds kind of out of tune as I had just turned on my A6:
"Since I am trying to reassemble my MOTM tracks of a train passing by to sync up to video of real trains, I might as well put up an MP3 where the separate tracks/sounds can be heard by themselves for those who are curious as to what makes up the final recording. It was all done on the MOTM modular synth plus about 5 different effects devices.
MOTM train dissected is here.
MOTM train with all sounds mixed together (has been posted before, but here for reference or new to those who haven't heard it).
Also, I was in the middle of a dialogue on another synth forum talking about the Alesis A6 when some people interrupted our conversation and also mailed to my inbox saying they didn't believe my A6 sounds (liquids and sitar) were synthesized, accused me of being a possible fraud, and they were going to spread the word that I fake synth demos unless I proved otherwise by posting the patches. I didn't have patches on my computer to send, nor did I really want to, so I recorded those sounds with me turning random knobs on the A6 to prove they're from the synth just to shut them up. I might as well get more use out of that mp3 before I pull it down in a few days since I've had some on this list make the same ridiculous accusations, so if you want to hear it, don't delay.
Here were the original demos they heard and questioned:
http://home.att.net/~synth6/MOTM_A6_Indian.mp3
http://home.att.net/~synth6/A6_Pouring_Water.mp3
http://home.att.net/~synth6/A6_Boiling_Liquid.mp3
Here is me turning knobs and showing they're synthesized. Note that the sitar sounds kind of out of tune as I had just turned on my A6:
Saturday, January 12, 2008
Synthesized Scarlatti in W. Carlos Style - Stereo
YouTube via Elhardt
"Here are some experiments I did in trying to mimic the style of Walter/Wendy Carlos' synthesizer technique and style of timbres. Carlos was using a 1960's era patchable modular Moog synthesizer with a different architecture than that of the Alesis Andromeda synthesizer. Each one has some advantages and disadvantages over the other but both use analog circuitry.
This video includes about 3/5 of a harpsichord sonata by Scarlatti. It is played by hand on a velocity sensitive keyboard, one monophonic passage at a time, and overdubbed onto multi-track.
Be sure to check out other related videos in my synthesizer series, and check back now and then as I will be posting more in the near future."
Wednesday, January 09, 2008
Real vs Synthesized Symphony Orchestra
YouTube via Elhardt
"This is one in a series of videos of me demonstrating advanced sound synthesis using analog or virtual analog synthesizers and subtractive synthesis. Each video lists what synthesizer was used. In addition, some standard outboard effects were used such as EQ, reverb, digital delays, and/or chorus.
Be sure to check out other related videos in my series, and check back now and then as I will be posting more in the near future."
Thursday, June 28, 2007
Monday, June 18, 2007
Vocoder Magic
YouTube via SynthFanKH.
"Seekers Vocoder Dissected"
If you don't get this, or even if you do, check out these posts. The gloves are a reference to the vids by 123synthland.
Monday, June 11, 2007
Synthesized Sounds: Beach & Sea
"I've put video to some older synthesizer audio files I've done over the years. They make good demonstrations of what can be accomplished using analog subtractive synthesis. Each video lists what synth was used, in addition, some standard outboard effects were used such as EQ, reverb, digital delays, and/or chorus. -Ken Elhardt"
Kenneth B. Elhardt Synthesizer Page
Click here for Kenneth's new Synthesizer Page on Google pages. There are a couple more shots up. Hopefully even more will come.
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH