VIRTUAL ROLAND SOUND CANVAS PROGRAMMER - for APPLE LOGIC v4 > vX

Avialable on Reverb here.

"FOR USE WITH Roland SC-88 PRO, SC-88, SC-55 MKII, SC-55, SC-8850*, CM-64, etc. (*partial support only)


*Dust off and unleash the programming power of your venerable Roland SOUND CANVAS
*Press into service those fat and juicy Roland resonant filters
*Tweak all those pesky hidden effects parameters
*Easily dial in all those eminently routable continuous controllers for maximum expression and creativity
*Program unique sounds starting with the basic building blocks of the well-honed Roland GM sound sets
*Play all those old SMF files with a unique twist to your sounds, programmed by you
*These are just some of the things you can do with this new comprehensive Roland SOUND CANVAS programmer for Apple’s LOGIC DAW


This software is a virtual Roland Sound Canvas programmer for use with various Roland Sound Canvas synthesizers. It simulates a hardware programmer in a software environment within the APPLE LOGIC audio / sequencer program (formerly Emagic LOGIC). To use this software you MUST have a valid copy of LOGIC on your computer (see below) as well as a MIDI interface which connects your computer via MIDI cable to your hardware synthesizer (or you can use the built-in serial interface on some of these units). This software CANNOT be used as a stand alone application under any circumstances. It will not run in Reason, Ableton, AU, VST or any other plug-in format. It is created and presented through use of the LOGIC “environment” architecture.

This programmer is compatible with many different Roland SOUND CANVAS models to varying degrees. Completely optimized for Roland SC-88 PRO, it handles all possible editing duties in that unit with the single exception of micro-tuning, and the same for the SC-88. It will also support the earlier SOUND CANVAS models such as the SC-55 Mk II, SC-55, and a host of others using the GM standard and extras to the degree supported by your particular model’s architecture. This includes Roland’s PC computer products, Virtual Sound Canvas and many others - about 40 different units in all. Check this WIKI page if you want too see if your unit may be supported: https://en.wikipedia.org/wiki/Roland_Sound_Canvas

CLICK FOR MORE »

Roland TR 06 Editor and Controller - VST and Standalone

mller30161

"You can buy it on my Homepage:
https://roland-tr-06-editor.jimdofree...
Price: 6,90 € / $ 7,90

With the TR-06 Editor you have direct access to many parameters and can save them as a Sound Data File and
load them back into the TR-06 at any time.
In the PlugIn VST version you can record the controller movements and thus integrate the Roland TR-06 Drumatix into your DAW project.

Editor Features:
- Complex sound changes
- Direct access to the sound parameters of the TR-06
- The volume of LT + HT and OH + CH can be adjusted separately.
- For BD, SD, LT and HT a random function can be used.
- X-Y modulation of all parameters
- The Drum Sound settings can be stored in a Sound Bank as single sounds or drum kit and loaded again.
- 49 drum sound presets and 8 Drum Kit Presets (TR 606) are included
- All controllers can be automated.
- The editor settings can be saved in the DAW with the project

The editor is available for PC as VST / Standalone 32/64 bit and for MAC as VST / AU / Standalone 64 bit.

Price 6,90€ / $ 7,90

Greeting, Momo Müller"

Sonic Freaks Moog Cluster Flux Software Editor

Sonic Freaks

"The Cluster Flux Editor is an editor software for the Moog™ Cluster Flux MF-108m pedal. The Cluster Flux is a flange/chorus pedal with a lot of hidden features under its hood. We have created the Cluster Flux Editor to control all parameters and features of the Cluster Flux including all the hidden ones. With our editor you will discover a whole new set of parameters and sound possibilities.

For more info click here: https://tinyurl.com/yxblrwk9"

Coffeeshopped Releases E-mu Proteus/1 and Proteus/2 Editors for Patch Base

via Coffeshopped where you'll find additional details.

"The new versions of Patch Base (iOS version 3.14 and Mac version 1.8) add editor/librarians for the E-mu Proteus/1 and Proteus/2. The E-mu Proteus/1 is a rompler/synth first released in 1989 that sold like hotcakes, and the Proteus/2 is the follow-up that came a year later with the same architecture but a different set of sounds (and included the preset "Whistl'n Joe" that makes the iconic sound from the X-Files theme song). There are many more members of the Proteus family, but for now these are the first that Patch Base supports."

Arturia MicroFreak Editor and Sound Generator, VST and Standalone

mller30161

"You can buy it on my homepage:
https://micro-freak-editor.jimdofree.com
Price: 5,90€ / $6.90"

"With the MicroFreak Editor and Sound Generator you have direct access to the parameters and you can generate new sound with 4 random methods
So you can get to know the great sound potential of the MicroFreak.
In the PlugIn VST Version you can record the controller movements and how to integrate the Arturia MicroFreak Synth into your DAW Project.

Editor Features:
- Complex sound changes
- Direct access to the sound parameters
- All controllers can be automated.
- X-Y modulation of all parameters
- With the „Random“ function new sounds can be generated quickly.

The editor is available for PC as VST / Standalone 32/64 bit and for MAC as VST / AU / Standalone 64 bit."

Volca Drum Editor by Ableton Drummer

Isotonik Studios

"The Volca Drum Editor is a Max for Live device which lets you edit, control, save and recall every parameter from the Korg Volca Drum digital percussion synthesizer within Ableton Live. This could become handy for storing and recalling presets, automate sound changes while playing and accessing parameters in a more structured and better overview. You need to connect your Korg Volca Drum via the MIDI in 5-pin socket to your computer. This can be done using an external sound card with a MIDI out socket or a USB-to-MIDI converter.

Easy to Set Up in Ableton Live

There is a Set-Up template/Ableton Live set included in this Ableton Live Pack/download for this Max for Live device BUT as the “MIDI To” section need to be edited and applied to your hardware I advise you to go through this whole set up section of the manual to fully understand how this MIDI routing works here.

GET IT HERE - https://isotonikstudios.com/product/k..."

Elektron Model Cycles Editor - VST and Standalone

Published on Jun 4, 2020 mller30161

You can buy it on my homepage:
https://elektron-model-samples-editor...
Price: 5,90€ / $6.90

"This Editor for the Elektron "Model Cycles" facilitates the sound adjustment of the 6 Tracks.

- You have direct access to all parameters.
- The hidden parameters for LFO and FX are easy to use.
- All Patterns can also be selected directly.
- Additionally there is a solo function for the 6 Tracks.
- With the X-Y Pads all parameters can be controlled, but they are especially suitable as Faders between the tracks.
- The Editor is perfect for integrating Model Cycles into the DAW.
- All parameters can be automated and saved with the DAW project.
- The Elektron Model Cycles Editor is available for PC (32/64 bit) as standalone and VST and for MAC (64 bit) as
standalone, VST and AU."

Patch Base Editor for the Yamaha DX21 Editor Now Available

via Patch Base

"The latest updates to Patch Base (iOS version 3.11 and Mac version 1.5) bring an editor/librarian for the Yamaha DX21. The DX21 is another of Yamaha's many 4-operator FM synthesizers from the 80's. It's very similar to the DX100, but includes a Pitch Envelope as well as a Chorus effect. It's also much larger than the DX100."

Korg Volca Drum Editor and Soundbank - VST and Standalone

Published on May 16, 2020 mller30161

"You can buy it on my homepage:
https://korg-volca-drum-editor.jimdof...
Price: 5,90€ / $6.90
Here is my Midi Editor with Sound Bank for the Korg Volca Drum Synthesizer, the „ Volca Drum Editor“.

With the Volca Drum Editor you have direct access to all parameters and can save them as a Sound Data File and load them back into the Volca Drum at any time.
In the PlugIn VST Version you can record the controller movements and how to integrate the Volca Drum Synth into your DAW Project.

Editor Features:
- Complex sound changes
- Direct access to the sound parameters
- All controllers can be automated.
- X-Y modulation of all parameters
- The Editor settings can be stored in a Sound Bank and loaded again.
- With the „Random“ function new sounds can be generated quickly for each drum part.
Which you can save and load into any drum part.
- Drum Kits can be put together and saved.
- A Sound Bank with 50 Sounds and 3 Drum Kits is included.

The editor is available for PC as VST / Standalone 32/64 bit and for MAC as VST / AU / Standalone 64 bit."

noyzelab's NYZ BSII M8Y Pure Data Patched Editor for the Novation Bass Station II

Available here

"Pure Data patch to assist with editing the Novation Bass Station II consisting of 3 main editors i] AFX Mode ii] Microtuning iii] On-key Functions"

via @noyzelab:

"NYZ BSII M8Y for editing AFX Mode, Microtuning & On-Key Functions on Bass Station II available as a FREE open source @HashtagPureData patch

beta testing & special advisory natteringz @AphexTwin
+
THNX 2 @WeAreNovation"

Roland System-1 Editor and Sound Bank as VST and Standalone

Published on Apr 14, 2020 mller30161

"You can buy it on my homepage:
https://roland-system-1-editor.jimdof...
Price: 5,90€ / $6.90
The Editor and Sound Bank for the Roland System-1 Synthesizer.
With the System-1 Editor you have direct access to all parameters and can save them as a Sound Data File and load them back into the System-1 at any time.
In the PlugIn VST Version you can record the controller movements and how to integrate the System-1 Synth into your DAW Project.
Editor Features:
- Complex sound changes
- Direct access to the sound parameters
- The new OSC 1+2 waveforms are directly selectable.
- X-Y modulation of Alles Liebe. Papa parameters
- The Editor settings can be stored in a Sound Bank and loaded again.
- A Sound Bank with 100 Sounds is included.
- With the "Random" Function (3 different mods are possible) new sounds can be generated quickly.

The editor is available for PC as VST / Standalone 32/64 bit and
for MAC as VST / AU / Standalone 64 bit."

REV2 DEGRADER™ Generative Sound Design Software for the Sequential Prophet REV2

via Audio Cookbook

"REV2 Degrader™ is a generative sound design tool for the Sequential Prophet REV2 polyphonic analog synthesizer. The application is designed to algorithmically morph parameters on the instrument in realtime. Keep playing or record the results as up to one-hundred-twenty-one parameters on the REV2 are changing all at once!

Use REV2 Degrader™ to create anything from chaotic rapidly changing textures to slow evolving drones. REV2 Degrader breathes new life into the Prophet REV2 allowing you to explore vast unique soundscapes illustrating how powerful and diverse the possibilities of the REV2 really are. This tool is designed to help you uncover new territory hidden within the sonic depths of your instrument.

REV2 Degrader™ is currently in beta testing and will be released in early March, 2020. It is currently only available for Mac OS, but a Windows version is planned. If you would like to pre-order REV2 Degrader™ for USD $39.99 please use the PayPal link below. The purchase price guarantees access to all future upgrades of REV2 Degrader™ and will help support the development of more software and patchbanks for the REV2 and other instruments."