MATRIXSYNTH: New Updates


Showing posts with label New Updates. Show all posts
Showing posts with label New Updates. Show all posts

Tuesday, September 12, 2023

u-he Filterscape 1.5 – The Creative Multi-Talent


video upload by u-he

"Available here: https://u-he.com/products/filterscape/

Version 1.5 of our classic Filterscape plugin bundle has received a major overhaul: a sleek new look, better sounding EQs and new analogue filter models, among other things. Filterscape FX gives you a set of powerful 4-band EQs and multi-mode filters to shape your sounds in unprecedented ways. Filterscape Q6 has a slightly reduced feature set but sports 6 EQ bands and is more focussed on dynamic tasks. Filterscape VA is a complete virtual analogue synthesizer with a polyphonic morphing EQ.u-he,synthesizer,synths,VST,AU,plugin,synth,analogue,analog"

Filterscape FX/Q6 – Preset Walkthrough

video upload by u-he

"Here is a selection of presets from Filterscape FX/Q6 (version 1.5). We used a broad range of audio material, and tweaked some of the controls while recording.

Music by Seb (Hyboid)

00:00 - Intro
00:07 - Diva Pad
03:07 - Hive Sequence
05:31 - Beats
09:10 - Electric Piano
11:46 - Clean Electric Guitar
14:54 - Distorted Electric Guitar
17:44 - Orchestra
20:20 - Drummachine
23:19 - Acoustic Drums (Filterscape Q6 presets)"

Radikal Technologies Announces DELTA CEP A & A2 VERSION 2 & NEW MANUALS



via Radikal Technologies

"We are happy to announce, that the new firmware release version of the DELTA CEP A and it’s successor, the DELTA CEP A2 is now online! New manuals have been written to make sure you benefit from all new features from the first moment. The manual contains a detailed update procedure. Beside enhancements for the user interface we added a performance step sequencer and full MIDI parameter control. The Desktop versions even sends all knob movements out."

Roland TR-8S v3.0/TR-6S v2.0 Firmware Update Adds Roland CR-78 & TR-808 Chromatic Bass Instrument


Overview video upload by RolandChannel

"The TR-8S and TR-6S Rhythm Performers continue their sonic evolution with TR-8S v3.0 and TR-6S v2.0 updates. These free upgrades add new instruments and features to the Rhythm Performers, including the legendary Roland CR-78 CompuRhythm and TR-808 Chromatic Bass. Plus, the TR-EDITOR gets a refresh with compact mode for smaller displays.

In this video, you’ll learn about the new enhancements added with the TR-8S v3.0 and TR-6S v2.0 updates:
00:00 Introduction
00:50 CompuRhythm CR-78 ACB Model
05:26 TR-808 Chromatic Bass

The original CR-78 CompuRhythm was launched in 1978 as the first mass-produced programmable rhythm machine. Now, the TR captures that magic with pristine ACB CR sounds, including 14 instruments and original preset patterns, as well as updated advanced patterns to pepper your beats with CR-78 zest. Plus, discover an array of new parameter controls to push the CR-78 into new sonic dimensions.

Tuned 808 basslines are a staple in genres like trap, hip-hop, electro, and other styles of electronic music. The new 808 Chromatic Bass instrument allows you to use motion recording to tune basslines with legit 808 bass sounds directly from the TR-8S and TR-6S—no DAW required.

To learn more about the TR-8S v3.0 update, please visit: https://www.roland.com/global/product...

To learn more about the TR-6S v2.0 update, please visit: https://www.roland.com/global/product...

To read about the CR-78 history, please visit:
https://articles.roland.com/cr-78-the..."

*NEW V3.00* Roland TR8S & TR6S (V2) with CR78 and Chromatic 808

video upload by Starsky Carr

"NEW FIRMWARE for the TR8S gives us an ACB model of the classic CR-78 in addition to a tuneable 808 kick. Use CTRL to tune by semitones for super easy 808 subs.

The CR78 tones are all tweak able, with decay and tuning plus attack on the kick, snappy on the snare and a metallic clang on the hats.

We also have the original CR78 rhythms... Bossa Nova here we come... :)"

And the press release:



"Free Updates Add an ACB Model of the Classic CR-78 CompuRhythm Drum Machine and a New TR-808 Chromatic Bass Instrument

Los Angeles, CA, Sept. 12, 2023 — Roland announces significant system updates for the popular TR-8S and TR-6S Rhythm Performer products. Available as free downloads, TR-8S Version 3.0 and TR-6S Version 2.0 feature an authentic ACB model of the CR-78 CompuRhythm—an influential Roland rhythm machine from the late 1970s—plus a new TR-808 Chromatic Bass instrument for creating basslines. The companion TR-EDITOR app has also been updated with a compact UI option for more efficient operation on smaller displays.

The TR-8S and TR-6S carry on the long-running legacy of Roland rhythm machines, bringing legendary sounds together with the latest technologies and a host of fresh performance tools for today’s musicians, producers, and DJs. These powerful instruments feature authentic models of important TR products from the company’s history, including the TR-808, TR-909, TR-707, TR-727, and TR-606. With the addition of the CR-78 CompuRhythm, the TR-8S and TR-6S now offer the most complete collection of classic Roland rhythm machines available in hardware form.

TR drum machines have driven music culture for decades, forming the backbone of hip-hop, pop, and electronic styles and defining the sound of multiple genres and subgenres. Introduced in 1978, the CR-78 was a direct predecessor of the TR-808 and the first mass-produced programmable rhythm machine. Its distinctive sound has left its own indelible footprint on pop classics from the 1980s and beyond, and it remains highly sought-after in the vintage marketplace.

Brought to life with Roland’s ACB (Analog Circuit Behavior) technology, the CR-78 model offers every sound and nearly all preset patterns from the original analog hardware. It also includes new patterns and advanced sound design capabilities made possible with the modern ACB approach.

Along with the CR-78, the TR-8S and TR-6S updates add a newly developed TR-808 Chromatic Bass instrument. The sound of the TR-808 bass drum revolutionized popular music with its deep, rich sub-bass and punchy quality. Clever producers began using samples of this revered instrument to play the sound chromatically, creating a new hybrid voice that fills the role of both kick drum and bass. The TR-808 Chromatic Bass instrument puts this ability at the user’s fingertips, allowing them to create tuned basslines with the versatile TR-808 bass drum in the TR-8S and TR-6S.

The free TR-EDITOR for macOS and Windows significantly enhances the workflow of the TR-8S and TR-6S, providing an easy-to-use graphical interface with expanded visual controls and organizational tools. The latest version includes a compact UI option that frees up screen space for using the editor along with other applications on small computer displays.

Availability & Pricing

The Roland TR-8S and TR-6S are available now for $749.99 and $399.99, respectively, in the U.S. The Roland TR-8S, TR-6S, and TR-EDITOR updates are available now for free."

Wednesday, September 06, 2023

Spectraphon Firmware Update!


video upload by MAKEN0ISE

"New Spectraphon firmware version sp38 is available now!

In addition to a couple fun new features, this update includes critical bug fixes, and is therefore recommended for all Spectraphon users.

This firmware can be downloaded from our website: https://www.makenoisemusic.com/manual...

In this video, we’ll show how to install the firmware, and briefly go over the new features. All this information is also included in the readme file when you download the firmware.

New features:
1. Sub-Oscillator is now available as a Sub/CV output mode in SAM (previously only available in SAO). 2. Adds option to Delete currently selected User Array and return to Default Array on current slot. To Delete, while holding SHIFT button on the Side whose User Array you are Deleting, press and hold opposing SHIFT button for 2 seconds. For example to delete current Array on Side A, Hold SHIFT-A first, then Hold SHIFT-B for two seconds.

http://www.makenoisemusic.com/modules..."

Monday, September 04, 2023

disting EX - Spectral Freeze


video upload by Expert Sleepers

"New in firmware v1.23.
https://expert-sleepers.co.uk/disting...

00:00 Demo
00:33 Introduction
05:07 Movement
08:28 Sort of looping
10:06 Effects (delay and reverb)
12:21 Mixer
14:44 Etherization
16:40 Offset (manual position control)
20:07 Pitch shifting
21:47 Outro demo'

Sunday, September 03, 2023

CubuSynth Engine V2 Introduction


video upload by CubuSynth Modular

00:00 Intro
00:53 Sine Shaper
01:26 Wavefolder
01:48 RM Output
02:25 AM Output
03:06 Exhaust - Audio optimized Chaos
04:06 Exhaust - Sub-Osc
04:31 Exhaust - Mix Out
05:25 Exhaust - Gate / Trigger
07:50 Sounds

Friday, August 25, 2023

Critter & Guitari - RichFM for 201 Pocket Piano


video upload by Critter & Guitari

"Download: https://www.critterandguitari.com/blo...
6-operator FM Synth mode for the 201 Pocket Piano!
The knobs control the following:
Knob 1: Decay
Knob 2: Tone
Knob 3 : Synth preset selector. It selects from eight presets."

Sunday, August 20, 2023

Wingie2: New alternate tuning features in firmware v3.1


video upload by Dave Seidel

"Meng Qi's Wingie2 resonator is a unique musical device with many uses. As a user of microtonal tunings, I decided to try to add some microtonal abilities to the firmware, which is open source. I am happy to say that Meng has accepted my work, and it will be part of the v3.1 firmware release.

This video is meant to provide an overview of the new features, including details on usage, and a couple of demos. I hope you find it helpful, despite my primitive video skills. For more information, including details of each tuning and a ToushOSC template for switching between tunings, please go to https://mysterybear.net/projects/wing...

0:00 Intro
2:19 Selecting a tuning manually
4:39 Selecting a tuning using MIDI
5:28 Audio run-through of the tunings
10:27 Demo using Meta-Slendro tuning
12:59 Demo of tuned caves

Here is the v3.1 release:
https://github.com/mengqimusic/Wingie..."



New features
Alternative Tunings (eight types)
Global mute/unmute in Cave mode

This one is in via brian comnes.

Saturday, August 19, 2023

5 Moons - Stereo Update!


video upload by Critter & Guitari

"Firmware update: https://forum.critterandguitari.com/t...
Record and play your sounds in stereo! This quick 5 Moons software update is an easy process that brings your music to the stereo spectrum. Here are some examples!"

Friday, August 18, 2023

Groove Synthesis 3rd Wave OS 1.5 Update Adds MPE Support, Poly Unison, Free Running OSCS & Long LFOs



via Groove Synthesis

3rd Wave OS version 1.5

new in this release:

- support for MIDI MPE controllers - enable MPE from the GLOBAL menu and explore the new modulation sources at the end of the list. Pitch bend range can be set in the MISC menu

- option for free running analog oscillators in the MISC menu which is settable per patch - In the analog waveform mode, which you are using when you select the Axx waveforms like Saw and Square, now has the option to make the waveforms not reset when you start a new note. In this mode, the oscillators will continue to drift from each other as they do on some fully analog synthesizers. There are two side effects if you are using free running for the analog waveforms:

1. When two or more oscillators are running at the same time, the phase of the waveforms will not be reset and could start at any position. As a result, there will be phase cancellation compared to having the oscillators always start at the same point. What you will hear is that the notes will change volume level slightly as the oscillators start and also drift in and out of phase with each other.

2. In the normal mode the oscillator always starts at zero. Now it could start at any point in its phase position. That means when you hit a note, a single oscillator could be at 0, +1.0, -1.0, or anywhere in between. If it starts at or close to +1.0 ot -1.0, you are going from no sound to fully on immediately. This can cause a click at the beginning of the note depending on the phase. It is noticeable mostly when using a sine wave, and not too noticeable with something like a saw or square. If you want to use this free running mode, turn the attack time up to +20 or higher to quickly fade in and avoid the potential click.

Wednesday, August 16, 2023

8 patches with LILLIAN for Drumlogue


video upload by DATABROTH

"grab Lillian here: https://boochow.gumroad.com/l/lillian

Lillian is a clone of Braids for Korgs Drumlogue, a must have for any Drumlogue users, as it opens up an entire array of sounds."

Lillian: synth unit for drumlogue

video upload by boochow

"Lillian is available from the link below for free.

https://boochow.gumroad.com/l/lillian"

Tuesday, August 15, 2023

Molli Looper Update 1.0.3 Freeze Demo


video upload by Oliver Greschke

"Update 1.0.3 introduces a new 'Freeze' Mode, which enables you to switch between already recorded sound (snippets) and the dry input signal. This means, you can toggle between 2 (totally) different sounds now.

Molli Looper is a realtime stereo effect for looping and filtering.
Intended mainly as an easy to use live performance tool, no preparation is needed to trigger loop recording - input is constantly recorded in the background to be triggered whenever it is needed.
You can use Molli Looper either as iOS Standalone app or as AUv3 plugin.

- App Store: https://apps.apple.com/us/app/mollilo...
- Website: https://www.mollilabs.com"

Winter Plankton Zaps Firmware Update 1.1


Zaps new firmware - 1.1 video upload by Plankton Electronics

00:00 Intro
00:14 Randomize Sound
00:38 Randomize Banks - Bass Drum
03:06 Randomize Banks - Snare Drum
03:55 Randomize Banks - Low Drum / Tom
04:27 Randomize Banks - FM Perc
05:00 Randomize Banks - Punchy FM Perc
05:18 Randomize Banks - FM/AM Perc
06:26 Randomize Banks - Glass AM
06:57 Randomize Banks - FM Tone Pitched
07:40 Randomize Banks - High Tone
08:00 Randomize Banks - Multi-Drum 1
08:25 Randomize Banks - Multi-Drum 2
09:33 Randomize Banks - Chaos
10:12 Randomize Banks - Dirty 1
10:55 Randomize Banks - Dirty 2
11:38 Randomize Banks - Retrigger Env1
12:16 Randomize Banks - Retrigger Env2
12:51 Randomize Banks - Full Set
14:13 Screen Saver
14:53 Trigger Delay



"Winter Plankton Zaps firmware has been updated to V1.1. We have introduced new randomize template modes for quickly creating bassdrums, snares, and other percussion sounds, simultaneous control of both oscillators (for melodic lines), a new trigger delay setting to get proper slot changes with mot sequencers and an screen saver among other things.

New features and improvements:

New 'Randomize' templates for creating Sounds and Banks: Bass drum 1, Bass drum 2, Snare drum, Low drum toms, FM percussion, FM and AM percussion, Glass AM, Pitched FM tones, High tones, Multi-drum 1, Multi-drum 2, Chaos, Dirty 1, Dirty 2, Retrigger envelope 1, Retrigger envelope 2, and Full set template (for Banks).

Simultaneous CV IN control for pitch 1 & 2: You can now control both oscillators with just one CV source.

New Trigger delay setting: for all the Gate and CV sources that change the CV after rising the gate, we have added a configurable trigger delay, so once the trigger is received we wait x ms to read the CV.
Screen saver: We added a new adjustable screen and energy saver following user requests.
Now it's possible to randomize a slots or banks via CV IN trigger.
Added CV in control for Retrigger time and Slope type.
Improved SLOT buttons behavior in MUTE, now we show both muted slots and playing slots (with a more intense light)
Bug fixes:

Fixed a bug where the HPF noise fader CV value was not being sent when it was assigned as an output.
Fixed a bug where the slope parameter was not responding well to random values.
CV in 'Morph to' bug fixed
Fixed a bug where the morph destination was no correctly reset after removing the cable from the cv input.
CV 6 input was not working with CV BANK Change.
Other minor bugs fixed.


Files:

Zaps V1.1 updater file: https://github.com/enoughframes/ZAPS_Updater
Zaps manual for V1.1: https://www.planktonelectronics.com/docs/zaps/Zaps_Manual.pdf"

Donner's Essential B1 Bass Synthesizer Gets a Major Update Including Song Mode



Press Release follows:

[Los Angeles, August 15, 2023] – Chinese musical instrument manufacturer Donner today announced the release of the latest firmware update, V1.1.0, for the Essential B1 Bass Synthesizer, their first analog bassline synthesizer with sequencer. This major update brings a host of exciting new features, enhancements, and bug fixes, making the Essential B1 even more versatile and user-friendly.

SONG MODE Unleashes Infinite Creativity
With the V1.1.0 firmware update and the introduction of SONG MODE, a powerful feature that extends the sequencer from 16 steps to an astounding 256 steps, users can now chain up to 16 patterns, creating seamless transitions and expanding the possibilities of music creation. The new SONG MODE can be switched automatically or manually using the 16 designated buttons, providing quick access to 16 favorite patterns.

“SONG MODE is an outcome after the discussion and feedback I had with our users on Gearspace. Simply double tap the PATTERN button to enter the SONG MODE, you can program, choose, and chain up to 16 patterns from the 128 stored patterns.” Says Logan Torres, product manager for the synthesizer product line of Donner, “We are deeply grateful for the valuable feedback from our users, who have continuously driven us to unlock the full potential of the Essential B1 Bass Synthesizer.” Logan added.

Other Updates from the V1.1.0
In addition to the groundbreaking SONG MODE, the V1.1.0 firmware update brings several enhancements and bug fixes, ensuring a smoother and more enjoyable user experience.
Firmware Version Display
Upon power on, the LED screen now displays the firmware version for easy reference.
Improved Step Editing
The back-lit keypads now indicate the pitch of each step during REC/EDIT mode, facilitating precise adjustments.
Streamlined Parameter Adjustment
Adjusting OCT, GATE LENGTH, and RATCHET for each step is now faster and more intuitive by holding the corresponding button and pressing the↑/ ↓ buttons.
Smart Save Indicator
Whenever unsaved changes are present in the sequence, the SAVE button will light up, and when switching patterns without saving, the SAVE button will flash briefly for confirmation.
Enhanced Random Note Generator Access
The Random Note Generator is now accessible via PLAY/STOP + REC/EDIT, simplifying the process during sequence playback.
Improved Clear/Rest Function
To clear the pending pattern, use PLAY/STOP + CLEAR/REST instead of PATTERN + CLEAR/REST.

To ensure the Essential B1 operates flawlessly, the V1.1.0 update also addresses some minor bugs fixes including fixes for Sequence Edit Glitch and Slide issue.

Users can now access to the latest firmware via Donner Control software. For a detailed walkthrough of the new SONG MODE and all the exciting features in the V1.1.0 firmware update, please check out Donnermusic.com.

The ESSENTIAL B1 Bass Synthesizer is now available globally with a 10% off discount on Donnerdeal.com and Donner’s Amazon storefront.

Sunday, August 13, 2023

John Bowen Solaris Gets An Update - v2.1 OS Adds New Functions to the Sequencer and Arpeggiator



via John Bowen Synth Design

"Here is my documentation describing the new functions in v2.1 OS for the sequencer and arpeggiator. I know many people don’t bother to 'read the manual', but in this case, I think it will really be of value. There’s some special applications of a few functions you need to know about, such as the ‘note pool’ used for random note values, or how the modulation paths work."

The images below are from the PDF documentation John shared with owners of the Solaris. You can click on the images to read. With four oscillators, vector joystick, classic analog models, wavetable synthesis, phase distortion, unique rotors, and a completely modular design, all running at 96 kHz for pristine audio quality, the Solaris remains one of the most powerful synthesizers to date.

Monday, July 31, 2023

Panner Doppler for Happy Nerding FX AID


video upload by Happy Nerding

"Panner Doppler" effect added to the Shaper section.
Rate - left to right panning speed
Range - left to right panning width
Amount - doppler pitch shift amount

Saturday, July 29, 2023

New Coral engine available for free! Harmonic oscillator + wavefolding + diode distortion 💜💣


video upload by OXI Instruments

New CORAL alternative FW with a new engine! Additive synthesis with Wavefolding and Diode distortion
video upload by OXI Instruments

Friday, July 28, 2023

1010music nanobox | lemondrop & fireball 1.2.5 Firmware Updates


video upload by 1010music

"A short video to show off the new additions to the nanobox | lemondrop 1.2.5 firmware"

1010music nanobox | fireball firmware 1.2.5

video upload by 1010music

"A short video to show off the new additions to the nanobox | fireball 1.2.5 firmware"

Thursday, July 20, 2023

Midicake ARP Firmware Updates are here again! DRONES AND DRUMS.


video upload by midicake

"The latest firmware for Midicake ARP includes another heap of exciting new features to help you create impressive and inspiring musical melodies and rhythms.

In this video, we run through the highlights. Enjoy! :)

Available to download now at https://midicake.com/downloads

00:00 Intro
00:32 DRONE mode
01:40 New Modulation Shapes
03:08 Modulation Toggle
03:38 Multi Menu display
03:58 Pitch Filter
05:50 Note Lock
07:00 Scale Lock
10:05 Stop Button Behaviour
11:00 Bug Fixes and Conclusion"

Monday, July 17, 2023

Happy Nerding FX AID Distortion 3-band


video upload by Happy Nerding

"3 band distortion effect added to the Shaper category."

http://www.happynerding.com/
PREVIOUS PAGE NEXT PAGE HOME



Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH