Phase 4 Daze - Voltage Controlled Phaser by Blue Lantern Modules

video upload by Robots Are Red

"In this video we take a look at the new phaser module from Blue Lantern Modules, Phase 4 Daze. This is a 16hp voltage controlled 6 stage phaser based on the phaser section of the 1978 Farfisa Polychrome.

00:00 - Opening
01:08 - Introduction
02:31 - What is a Phaser?
04:33 - Module Rundown
14:49 - Piano
17:59 - Drums
20:06 - Vocals
22:26 - Guitar"

Blue Lantern Parallax Multimode Dual Filter - Mutable Instruments Blades w/ New Layout

via Blue Lantern:

"I recently made my own layout for the discontinued Mutable Instruments Blades filter. I changed the size of the op amps to soic. The other original tssop size op amps are impossible to get because of the chip shortage. I am currently the only one making blades available again."

Available on eBay, Reverb, and Etsy

"A great alternative to the discontinued mutable instruments blades module. This custom module is functionally identical to the original. You can achieve the same sound pallet and both filters are 1v per octave compatible.

Model: BLM Parallax Filter
Width: 18hp
Current: +150mA -140mA
PCB LEVEL: 2 STACK, Power Connector on Level 1, Skiff Compatible.

This module is a custom jacks on top, knobs on the bottom design of the discontinued mutable instruments Blades dual multi-mode filter.

Original Design by Émilie Gillet

-Dual Distortion with spectral color control

-Fully analog, based on the 2164 quad VCA chip.

-Frequency knob range: 8Hz to 18kHz.

-Audio input impedance: 30k.

-DC-coupled audio inputs.

-Filter mode CV input impedance: 50k.

-Other CV inputs impedance: 100k.

-All CV inputs handle audio-rate modulations.

The project files for this product are located on the Survival page of the blue lantern modules website."

Blue Lantern Lunar Modulation Lab || LFO & Self Modulation

video upload by Robots Are Red

"In this video we dive a bit deeper into the LFO mode of the Lunar Modulation Lab along with some self modulation patch tips.

0:00 Introduction
2:02 Stairs Modulation
3:45 Sine Output
4:29 Reset Input
5:17 Divider Output/Sync Input
5:51 Div Selector
6:33 Double Saw
7:16 Even Wave
8:24 Some Music"

Gleba Part 2 // Multi-Mode VCF/VCA by Blue Lantern Modules - Patch tips and Q Trimmer Demo

video upload by Robots Are Red

"It smells like it is time for #2! In this video we look at a few more patch examples with Gleba, as well as toning down the resonance to more classic filter levels with the Q Trimmer.

The patches covered in this video are an acid bass, gated drums, and chords through Gleba."

Part 1 here

Blue Lantern Lucky 7 - 24db SH01 Low Pass VCF/VCA // Full Walkthrough and Demo

video upload by Robots Are Red

Introducing Lucky 7 by Blue Lantern Modules. This is a 16hp 24db Low Pass filter based on the famous Roland SH01 filter from 1978. Along with the two input filter, this module includes a built in OTA based VCA with two CV inputs, authentic headphone feedback circuit, two subharmonics generators, built in noise, and a good handful of CV inputs.
Just patch a VCO and an Envelope and you are ready to go!

In the video we take a deep dive into each knob and CV input, listen to the filter in various settings, and even look at some feedback self-patching with excellent results.

The Video:

01:06 - Overview
03:00 - Deep Overview
04:15 - Subs
04:34 - Noise
05:03 - VCA
06:24 - Audio In 2
07:30 - Feedback
09:28 - Expo CV Input
11:13 - Rez CV Input
11:53 - FM CV Input
13:07 - Linear CV Input
14:19 - VCA Input 2
15:49 - The Filter
20:05 - Dirty Sine VCO
21:48 - Feedback Patching

via this auction

Model: BLM Lucky 7
Width 16hp
Current: +69mA -68mA
PCB Stack: 1 Level, Skiff compatible.

Module type: analog filter, sub harmonic generator, internal vca, white noise generator, (self) oscillator

What does this do?

This particular product is my take on the vintage analog filter found on the Roland SH1 Keyboard. Some key differences from the original
are low end correction on the resonance path (audio level would drop), with voltage control, and I used a modern exponential converter.

The bass frequency will retain nicely on this modern version. No more audio level drop. The 'RCV' can be used to simulate Band Pass sounding tones when used with audio rate external sources..

I also included the famous feedback patch that lucky users of the vintage keyboard would do. Users would patch from the headphone output back into the filter external input.
I duplicated the original discrete headphone circuity and internally patched it for you. All you have to do is turn it up with the 'FBK' knob. Small settings go a long way with this.
It can get strange with too much feedback, in a good way.

24db Low Pass Filter.

Features:

(2) Possible External Audio inputs.
(1) White Noise Generator, Switch Jack internally patched to AIN2 input jack.
(2) Sub Hamronic Generators taken from the SH101 circuitry. Both are accessible by level knobs.
(1) Voltage Controlled Rez, with auto low end level correction.
(1) 1V per octave 'Expo' input.
(1) Linear FM input. Best used during Filter Self Oscilation duties.
(1) Bi-polar FM Attenuinverter. Best used with an external envelope generator.
(1) Internal VCA with 2 possible CV inputs. VCA knob is a manual offset to 'open' the VCA.

What you get:
Mixer +WhiteNoiseGen +Subharmonics +VCF +VCA

All you need is a vco, and envelope generator to complete a compact analog mono voice.


If this was literally your first and only module, it is possible to make sound and noise for entertainment.

Price $225.00

Blue Lantern Gleba VCF // Walkthrough & Demo

video upload by Robots Are Red

"In this video we take a look at the brand new VCF by Blue Lantern Modules, Gleba. Based on the VCF from BLM's Dwarf Star Semi Modular Synthesizer, Gleba crams a lot of fun functionality into only 10hp.

This VCF has:
- Two audio inputs, one with attenuator
- 12db Low Pass/Band Pass/High pass filter with mix & match switches
- A screaming self oscillating resonance sine wave
- Limit switch to squash those middle frequencies for a more metallic-like tone similar to the MS-20
- Two Subharmonics Generators, 1 and 2 octaves lower
- FM modulation input with attenuverter
- CV control over resonance and frequency (with 1v/oct tracking)
- A built in VCA that is bypassed when left unpatched.

Filter, crunch up, or add character to your sounds. Use it as an oscillator, a crunchy rudimentary EQ, as a nice squelchy filter, and so much more.

Special thanks to Blue Lantern for providing the the module for the video."

Update:

Gleba Part 2 // Multi-Mode VCF/VCA by Blue Lantern Modules - Patch tips and Q Trimmer Demo

video upload by Robots Are Red

"It smells like it is time for #2! In this video we look at a few more patch examples with Gleba, as well as toning down the resonance to more classic filter levels with the Q Trimmer.

The patches covered in this video are an acid bass, gated drums, and chords through Gleba."

Blue Lantern Syncussion Plus – Piezo Triggering

video upload by Robots Are Red

"In this video we explore various ways to trigger the Syncussion Plus using it's uniquely sensitive Piezo input.

- Contact Microphone
- Sustain Pedal
- V Drum Kick Pedal
- V Drum Pad (This is what the Piezo input was originally designed for)
- Offset Knob"

Follow-up to this post.

Blue Lantern Lunar Modulation Lab VCO/LFO || Demo, Manual, & Patch Tips

video upload by Robots Are Red

"In this video we dissect the mega powerful Lunar Modulation Lab VCO/LFO by Blue Lantern Modules. This is an 18hp triangle core VCO/LFO based on Buchla and Bergfotron designs, and is stable up to 10 octaves w/ 1V/Oct! The module has 11 different waveform outputs with adjustment switches that brings this module to 17 different waveform options, and that is before you start mixing them together!
We walk through all the outputs and inputs of the module along with some patch tips including self patching."

Blue Lantern Syncussion Plus - Percussion Synthesizer || Full Walkthrough, Manual, & Demo

video upload by Robots Are Red

"In this video we will boogey with Blue Lantern Module's Syncussion Plus eurorack drum module, inspired by the Pearl Syncussion Drum Synthesizer from the 1970's. While the original Syncussion has a handful of oscillator presets to switch through, the Syncussion Plus breaks open the presets with it's mixer section for more ability to customize. The Plus also has the addition of the Shimmer section which can add great metallic clanginess and shimmery effects to your sound via xor cmos modulation.

This module is great for creating all sorts of drum sounds using the various trigger and vca inputs, and creating other-worldly unique percussion sounds. The module can also be used as a sort of complex oscillator by utilizing the LFO, shimmer, noise, and 2 VCOs with the VCA cv input and 1v/oct input, or routing the output of Syncussion Plus to an external VCA.

(Tip: If the module seems to go crazy and continues to self trigger itself or triggers through the VCA CV and you don't want it to, plugging an unplugged cable into the Piezo input seems to eliminate those rogue internal triggers)

First I give a general overview of the module, followed by a full walkthrough of every single knob, switch, input, output, and button, and the video ends with some sound demos."

Jupiter Gas Analyzer VCF by Bluelantern

video upload by flavio mireles

"All the distortion is from the module. Its a feedback paradise."

JPGA SAW SWEEP

Arcade Kick from Blue Lantern Modules!

video upload by Electronisounds Audio

""Arcade Kick from Blue Lantern Modules!" In this video, I show many examples of what this kick drum module sounds like.
We check it out in different eurorack systems, run it through a few guitar pedals and see how it sounds in a few different musical genres.
I think this kick module sounds really "chewy, rubbery and beefy" - I LIKE IT!

Whatever kind of music you are making - KEEP IT UP, Friends!
Don't stop making *YOUR MUSIC*!!"



Electronisounds:
WEBSITE ► https://www.electronisounds.com/
PATREON ► https://www.patreon.com/DeanDaughters

Blue Lantern Cmos FX Processor MK2

videos uploaded by flavio mireles

Update: added a playlist with four demos above.

See the dealers on the right for availability.

"This module has all the internal circuits to complete a voice: sound generation + envelope generation + amplifier control.

The sound generation is interesting. The core is using 3 CMOS based oscillators that are performing exclusive 'or' logic.
This is known as 'XOR' ring modulation. This entire circuit is being voltage starved, a technique common among the advanced circuit bending hobby.
For example, portable vintage toys that use batteries sound different as there batteries loose voltage. I designed a CV controllable
circuit that simulates the 'dying batteries' scenario.

This is where the product's name comes from: CMOS FX Processor. Incoming audio is internally conditioned
to be those dying batteries. To my knowledge I don't think there is any other euro format product that uses this technique.

-CMOS FX INPUT jack has a capacitor on it's signal path, making this an AC input.
-MOD INPUT jack is a DC signal path.
-FM INPUT jack is also a DC signal path, but with level control (attenuator).

Envelope Generator

This is a digital based 1 shot circuit, that has 8 wave forms. The decay knob controls the tail of the envelope. There is no parameter for attack.
Some of the wave forms have set attack times if you require some 'fading' in on the control.
-Regeneration 'REGEN' parameter is a feedback. This controls the looping of your envelope.
-Delay parameter controls the time until the next 1 shot of your loop.
-Decay knob needs to be adjusted as you experiment using Regen and Delay parameters. Shorter decay times work best and make the looping faster.
-Envelope Output is 0-10V.

Amplifier Control

The internal circuit is an OTA based '13700' vca design.
-Accent input jack is a POSITIVE only conditioner. For example if you patch a -5/+5v signal, only the +5v portion reaches the VCA control.
This is good for making the audio louder at given intervals, but not making the audio 'mute'.
-VCA CV input jack is a direct DC coupled input. This will make the audio fade in and out of volume. Both positive and negative values make it to the VCA control.

How to use this module.

For best results you will need a sequencer or sample and hold from a digital fancy module. You can practice first by patching this to the 'FM' input and find your sweet spot with its level.
You will need to patch a 'tempo' to the trigger or you can use the W Pulse clock to trigger this product.

Once you got the hang of the module, make a sequenced based patch with your other modules. Use the CMOS FX Processor at the end of the audio signal path chain to 'Process' your audio.
Your going to here some bizzare techno. If you have a scope, the wave forms on the output are really crazy to see."

신디사이저 하나로 꽉채우는 웅장한 음악! Modular Synthesizer tone making

video upload by KeyMusic

"Synthbass Sound - BLM 7200 Modular
Hollywood movie style.

키보디스트 '윤채' 가 아날로그 신디사이저를 이용하여 신스베이스톤을 만들고 시퀸서를 이용하여 실시간 녹음을 하고 있는 장면이다."

신디사이저 하나로 꽉채우는 웅장한 음악! Modular Synthesizer tone making

video by KeyMusic

"Synthbass Sound - BLM 7200 Modular
Hollywood movie style.

키보디스트 '윤채' 가 아날로그 신디사이저를 이용하여 신스베이스톤을 만들고 시퀸서를 이용하여 실시간 녹음을 하고 있는 장면이다."

Blue Lantern Evila Diode Edition

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Blue Lantern SynthX Semi-modular Synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Complete analogue synth voice in an aluminium case. Two vco's, bp/lp/hp filter, two vca's, lfo, two buffered multiples, midi/cv converter.

This appears to be a prototype as the faceplate is a laminated print, so is most likely from the early days of Blue Lantern.

THIS WILL NOT FIT EURORACK. 43cm long, 18cm wide, 8cm high."

CLICK FOR MORE »

BLM Macro VCO Braids with renaissance firmware *BLOWOUT SALE*

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Blow out sale runs through October for the remaining stock of these modules.

CLICK FOR MORE »

Silent Strike - Autumn

Silent Strike

"Modular Paraphonic Patch Improv
.
.
.

Oscs - Mutable Instruments Braids, Plaits, Elements & Synthesis Technology E370
Effects - 4ms Tapographic Delay & Dual Looping Delay, Erica Synths DSP, Make Noise Erbe-Verb, Tiptop Z-DSP
Drums - Folktek Mescaline
Other Pops & Clicks - Blue Lantern Darpa 7200"

BLM 7200 Modular Synthesizer System with AC-420 Aluminum Enclosure Red

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Note the mushrooms on the front panel.

"BLM 7200 Modular Synthesizer System with AC-420 Aluminum Enclosure
Modular Dimensions: 17"x13"x3"

Modular Synth Weight: 8 lbs.
Package shipment is about 14lbs.

Red Color.

10 Patch Cables are included.


The power adapter is included!
12v DC Adapter is included to power up the system. World compatible, it is auto-switching. You must supply your countries IEC outlet cord.

This is a perfect addition to the Korg Arp 2600!

CLICK FOR MORE »

Blue Lantern Modules "Quad Quantizer" for better Melodics!

Electronisounds Audio

Check out the Blue Lantern Modules "Quad Quantizer" here:
https://www.bluelanternstore.com/stor...

► TIMESTAMPS

00:14 Example 01
(Locking an 8-step sequence to a minor scale)

02:00 Intro

02:20 Example 02
(Frenetic bass sequence groove)

04:35 How to use it 01
(Tuning your oscillators)

06:50 How to use it 01
(Make a basic melodic sequence)

09:20 How to use it 03
(More random melodies with white and pink noise)

11:28 Example 03
(Layered synth arp)

12: 57 How to use it 04
(Use an LFO to create melodies)

15:46 How to use it 05
(Use a sequencer to trigger the notes)

17:13 Example 04
(Abstract beat with arp sequence)

19:05 Example 05
(Abstract, ambient drone thing - a Sample and Hold signal is trigger the melodics)

21:08 Example 06
(Aggressive, dirty tekno bassline being locked to the minor scale )

WEBSITE ► https://www.electronisounds.com/
PATREON ► https://www.patreon.com/DeanDaughters