MATRIXSYNTH

at 8/15/2011 12:00:00 AM

YouTube Uploaded by iControlMIDI on May 22, 2011

iJX-8P - iControlMIDI
iPads on eBay

"Apple has released iJX-8P our Wired and Wireless CoreMIDI Editor for Roland JX-8P.

iJX-8P v1.2 offers:
• All TONE parameters
• All PATCH parameters

4-Controls per Parameter:
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Wave): as displayed on the JX-8P LCD
• Value (ex: Saw): as displayed on the JX-8P LCD, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

at 8/06/2011 12:00:00 AM

YouTube Uploaded by iControlMIDI on May 20, 2011
iMicrowave1 - iControlMIDI
iPads on eBay

"Apple has released iMicrowave1 for Waldorf Microwave 1 v2.00

iMicrowave1 v1.2:
• Automatically disables the Wave Envelop Loop Start Point parameter if the Wave Envelop Loop Mode is Off
• Automatically enables the Modulation Sources and Control parameters if the Modulation Amount is different than 0
• Automatically disables the Modulation Sources and Control parameters if the Modulation Amount is equal to 0
for a faster workflow.

4-Controls per Parameter
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Wave): as displayed on the Microwave 1 LCD
• Value (ex: Saw): as displayed on the Microwave 1 LCD, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

at 7/30/2011 09:33:00 PM

YouTube Uploaded by iControlMIDI on May 7, 2011
iMKS-7 - iControlMIDI
iPads on eBay

"Apple has released iMKS-7 for Roland MKS-7

iMKS-7 v1.2 offers:
• Independent and configurable MIDI channels with independent configurable parameters for the MELODY, CHORD and BASS parts
• "Demultiplexing" of some bytes (ex: byte 17) that shares up to 5 parameters. Those bytes are split into individual / independent parameters making the MKS-7 straightforward to control.

4-Controls per Parameter
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Saw): as written in the User Manual
• Value (ex: On): as written in the User Manual, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iMKS-7 - iControlMIDI
iPads on eBay

at 7/26/2011 08:29:00 PM

Something I'm working on for the Yamaha FS1R and TouchOSC with The Missing Link. This is the Operator parameters page. There are 8 Voiced and 8 Unvoiced operators in the FS1R. Multiply that by four parts and you are looking at 64 pages. Unfortunately TouchOSC does not appear to support a method I can use to select Operator and Part, so I'm looking at manually mapping every single control you see here times 64. It's probably going to take a while, but it is coming. I might make the editor available once Part 1 is complete. If anyone is interested, let me know. The one plus with TouchOSC is I can edit this on my Mac vs. directly on the iPad, which for a template this size makes the difference between being committed and simply giving up. I should say these pages are the last ones I need to complete before the editor will be complete. I have finally cracked the FS1R open. BTW, this editor will require The Missing Link as TouchOSC does not currently support sysex directly and the FS1R requires sysex for advanced editing. BTW, if your wondering what's up with the color scheme of my editor, it matches the FS1R.

at 7/23/2011 12:00:00 AM

YouTube Uploaded by iControlMIDI on Apr 30, 2011

"iMatrix-6 is qualified with Matrix-6R firmware 2.13. You can find instructions to check your Matrix-6 firmware version on the iControlMIDI support website."

"iMatrix-6 v1.2 offers:
4-Controls per Parameter
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: O2Wav): as displayed on the synth LCD, UI or User Manual
• Value (ex: Saw): as displayed on the synth LCD, UI or User Manual, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)

To offer an even better workflow than your Matrix-6 and as written in the Matrix-6 user manual:
• iMatrix-6 automatically disables Sample Source when you select a LFO Waveform different than Sample
• iMatrix-6 automatically enables Sample Source when you select a LFO Waveform equal to Sample
• iMatrix-6 automatically disables Retrigger Point when you select a LFO Trigger Mode equal to Off
• iMatrix-6 automatically enables Retrigger Point when you select a LFO Trigger Mode different than Off"

at 7/09/2011 12:00:00 AM

YouTube Uploaded by iControlMIDI on Apr 18, 2011
iJupiter-6 - iControlMIDI
iPads on eBay

"Apple has released iJupiter6 v1.2 for Roland Jupiter-6 Europa.

iJupiter6 v1.2 offers:
One parameter per waveform like on your Jupiter-6 control panel
• Europa VCO waveform selection MIDI implementation is quite complex (same byte / parameter for a given VCO to obtain all 16 waveforms combinations for VCO 2 and slightly less for VCO 1); we 'demultiplexed' each VCO waveform to an individual parameter on iJupiter6.

Automatically disables VCO 2 Pulse waveform when you select Square waveform; like your Jupiter-6.

4-Controls per Parameter
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value
• Name (ex: O2Wav): as displayed on the synth LCD, UI or User Manual
• Value (ex: Saw): as displayed on the synth LCD, UI or User Manual, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iJupiter-6 - iControlMIDI
iPads on eBay

at 7/02/2011 12:00:00 AM

YouTube Uploaded by iControlMIDI on Apr 2, 2011

"ControlMIDI. Plug & Play iPad Editors for Vintage & Software synths.
iWave1902 for Waldorf Wave v1.902.
Site: http://www.icontrolmididesign.com/
App Store:" iControlMIDI

iWave1902 - iControlMIDI
iPads on eBay

"iWave1902 v1.2 offers:
4-Controls per Parameter
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: O2Wav): as displayed on the synth LCD, UI or User Manual
• Value (ex: Saw): as displayed on the synth LCD, UI or User Manual, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)

LFO3 'Chopper' / Step Sequencer:
The Chopper (LFO3) is definitely one of the greatest feature of Wave OS 1.902; we have implemented a very cool way to display LFO3 Steps. Like a step sequencer, the Steps are lighten-up when used!"

iWave1902 - iControlMIDI
iPads on eBay

at 6/18/2011 12:00:00 AM

YouTube Uploaded by iControlMIDI on Mar 27, 2011

"iControlMIDI. Plug & Play iPad Editors for Vintage & Software synths.
iMemorymoog for Moog Memorymoog LAMM
Site: http://www.icontrolmididesign.com/"

"iMemorymoog v1.2 offers:
4-Controls per Parameter
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: VCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: O2Wav): as displayed on the synth LCD, UI or User Manual
• Value (ex: Saw): as displayed on the synth LCD, UI or User Manual, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iMemorymoog - iControlMIDI - iTunes
See iControlMIDI for more synth editors for the iPad.
iPads on eBay

at 6/04/2011 12:00:00 AM

"Apple has released iChromaCC+ v1.2 for Rhodes Chroma fitted with a CC+ MIDI / CPU upgrade board, a free upgrade for all iChromaCC+ v1.1 users.

iChromaCC+ v1.2 offers:
- a display of the Chroma Patch 'algorithms / connections' on the iPad as drawn on the Chroma user manual; touch a Patch on the iPad, iChromaCC+ sends the MIDI command to select this Patch and highlight the Patch number on the iPad! You never have to open the user manual anymore!

- a redesigned look & feel for enhanced readability plus some very tiny UI adjustments to make the workflow even better
- parameter default value buttons. In v1.2, if you touch the parameter value label, it resets the label / slider to a default value (ex: VCO wave = Saw; VCF Freq = wide open, etc...) for each parameter... this is the fastest workflow you'll ever get in sound designing!"

iChromaCC+ - iControlMIDI
iPads on eBay

at 6/02/2011 03:34:00 PM

YouTube Uploaded by MissingLinkMIDI on Jun 2, 2011

"www.wifimidi.com

In this video, I demonstrate using an iPad with a TouchOSC (www.hexler.net) template I created (available at: http://wifimidi.com/phpBB3/viewtopic.php?f=6&t=121) to control a Korg MicroKorg wirelessly via the Missing Link (www.wifimidi.com).

The Missing Link allows users to create completely custom software interfaces for controlling any of the MIDI parameters of their instruments. In this case, it exposes a lot of the controls and functions of the MicroKorg that are not easily accessible (or simultaneously configurable) directly. This is all done without a computer, ensuring the lowest possible latency and highest possible stability for critical performance applications."

iPad editor for the KORG MicroKORG

TouchOSC - hexler
iPads on eBay

Update: I gave this editor a try and it is excellent. It really opens up the MicroKORG and allows you to approach it in a way that was not possible below. You'll discover new things that were once inhibited. Unfortunately the MicroKORG does not make all parameters available via MIDI though. For example you can't adjust the speed of the arpeggiator, and you can select the effect type for FX1 and FX2. Note that is a limitation of the MicroKORG and not the editor.

at 5/30/2011 12:37:00 AM

This one is for the MIDITouch editor. You can find it here. To install it, you email it to yourself and then open it on the iPad. Odd, but it works. Also you will need to enable the Six-Trak to receive MIDI CC messages by holding down the Control section record button followed by 4 in the Select section to the right of Control (see this pic for reference).

I created an iPad Editors label for synth specific editors on the iPad. These are for existing templates. Let me know if I'm missing any and I will post them. Contact email is on the bottom right of the site.

MIDI Touch - Domestic Cat - iTunes
iPads on eBay

at 5/29/2011 10:37:00 AM

via rachel on The Missing Link's wifimidi.com forum

"I am happy to announce the initial release of my "ML-300", a rendition of the Roland PG-300 for MKS-50/ Alpha Juno Synths for the Missing Link!

This is for the iPad only, I am afraid, as that is all I have.

Please give it a try if you possess an MKS-50 or an Alpha Juno of some sort and let me know if you like it.

I will probably make some changes on request if I have time, but feel free to modify the template yourself, provide my original provenance is maintained.

Thanks for such a cool gadget - it's a lot of fun"

You can find the editor on the forum and mirrored here. Note that although the editor is mapped for The Missing Link, you should be able to edit it for CoreMIDI. The layout is done, it's just a matter of mapping the MIDI values in the TouchOSC editor.

TouchOSC - hexler
iPads on eBay

at 5/28/2011 12:00:00 AM

"Apple has released iXpander v1.2.1 for Oberheim Xpander / Matrix-12 a free upgrade for all iXpander v1.2 and v1.1 users.

iXpander v1.2.1 offers:
- a redesigned look & feel for enhanced readability plus some very tiny UI adjustments to make the workflow even better
- parameter default value buttons. In v1.2.1, if you touch the parameter value label, it resets the label / slider to a default value (ex: VCO wave = Saw; VCF Freq = wide open, etc...) for each parameter... this is the fastest workflow you'll ever get in sound designing!
- ‘Page 1’ AND ‘Page 2’ are displayed on the SAME iControlMIDI Page making it straightforward to see if you are using the TRI, SAW and PULSE or just the SAW (etc...) simply pressing 1 button (the Page + or - button) on iControlMIDI; iControlMIDI automatically enables / disables the relevant parameters for you!
- automatically selects ‘Page 1’ when you select a Page on the application tab bar (lower part of the screen, ex: VCO1) for a faster workflow.
- automatically enables / disables certain parameters based on other parameter values, like your Xpander / Matrix-12."

iXpander - iControlMIDI
iPads on eBay

at 5/21/2011 12:00:00 AM

"Apple has released iProphetVS v1.2 for Sequential Circuits Inc Prophet VS, a free upgrade for all iProphetVS v1.1 users.

iProphetVS v1.2 offers:
- a redesigned look & feel for enhanced readability plus some very tiny UI adjustments to make the workflow even better
- parameter default value buttons. In v1.2, if you touch the parameter value label, it resets the label / slider to a default value (ex: DCO wave = Saw; VCF Freq = wide open, etc...) for each parameter... this is the fastest workflow you'll ever get in sound designing!
- automatically enables / disables parameters based on other parameter values (ex: DCO wave = Noise automatically disables DCO Coarse and DCO Fine parameters; Chorus Left = On automatically disables Chorus Right and Chorus Left & Right parameters; etc...) exactly like your Prophet VS!"

iProphetVS - iControlMIDI
iPads on eBay

at 5/16/2011 03:24:00 PM

"MOPHO To Go is designed exclusively for and REQUIRES a Dave Smith Instruments MOPHO Desktop Module or MOPHO Keyboard.

MOPHO To Go provides iPad, iPhone and iPod Touch wireless WIFI RTP MIDI control of a MOPHO synthesizer connected to a Mac or PC, or even when connected directly to an iPad with USB Camera Connection Kit Accessory. MOPHO To Go is CoreMIDI compatible. No additional server software or downloads necessary.

MOPHO To Go features a modeless old school synth, knobtastic, retro control panel. Rotate iPad to landscape orientation for controls, Rotate iPad to portrait orientation for a full two octave plus keyboard.

MOPHO To Go provides an octave of full width keys and multi-touch controls for MOPHO Oscillators (shape, freq, fine, glide,) Mixer (mix,sub1,sub2,noise) and filter and amplifier envelopes (delay,attack,sustain,release,) audio mod, resonance, levels, BPM, Modulation, Pan, Volume, Channel, Program and Bank Select.

MOPHO To Go is a universal app for all of your iOS Devices.

50% discount for educational institutions.

New! MOPHO To Go works great with Remote for GarageBand, exclusively available in the iTunes App Store.

Maui Media Lab is a trademark of Maui Media Lab LLC.

Made in Maui"

Promo Codes:
WHXTXT9WJFLX
H7Y4L74YNK9J
6MYH3E63M4N9
X7L99KAFFANJ
F66J4JXNJLLY

Maui Media Lab
iPads on eBay
iPod Touch on eBay

at 5/14/2011 12:00:00 AM

"Apple has released iFS1R v1.2 for Yamaha FS1R, a free upgrade for all iFS1R v1.1 users.

iFS1R v1.2 offers:
- a redesigned look & feel for enhanced readability plus some very tiny UI adjustments to make the workflow even better
- parameter default value buttons. In v1.2, if you touch the parameter value label, it resets the label and slider to a default value (ex: Operator Coarse Frequency = 1.00, Operator Fine Frequency = 1.00, etc...) for each parameter... this is the fastest workflow you'll ever get in sound designing!
- iFS1R automatically enables / disables the relevant parameter set based on some parameters values (ex: Wave = Formant enables the formant parameters and disables the other non-formant parameters) to help you master the unit."

iFS1R - iControlMIDI
iPads on eBay

at 5/07/2011 12:00:00 AM

"Apple has released iDX7 v1.2 for Yamaha DX7, TX7, TXn16, a free upgrade for all iDX7 v1.1 and v1.1.1 users.

iDX7 v1.2 offers:
- a redesigned look & feel for enhanced readability plus some very tiny UI adjustments to make the workflow even better

- parameter default value buttons. In v1.2, if you touch the parameter value label, it resets the label and slider to a default value (ex: Operator Coarse Frequency = 1.00, Operator Fine Frequency = 1.00, etc...) for each parameter... this is the fastest workflow you'll ever get in sound designing!
- iDX7 calculates the Operator Fine Frequency values exactly as on your DX7; same values displayed on iDX7 and your DX7!
- iDX7 offers a graphical representation of the 32 DX7 algorithms, touching an algorithm on iDX7 selects this algorithm on your DX7

Also, we revised couple of iControlMIDI Apps prices down to meet market demands."

iDX7 - iControlMIDI
iControlMIDI
iPads on eBay

at 4/30/2011 12:00:00 AM

"iControlMIDI has released iTX81Z v1.2 for Yamaha TX81Z, a free upgrade for all iTX81Z v1.1 users.

iTX81Z v1.2 offers:
- a redesigned look & feel for enhanced readability plus some very tiny UI adjustments to make the workflow even better
- parameter default value buttons. In v1.2, if you touch the parameter value label, it resets the label / slider to a default value (ex: Operator Wave = 1, Operator Coarse Frequency = 1.00, etc...) for each parameter... this is the fastest workflow you'll ever get in sound designing!

Also, we revised couple of iControlMIDI Apps prices down to meet market demands."

iTX81Z - iControlMIDI
iPads on eBay

at 4/22/2011 12:00:00 AM

"Apple has released iMKS-80 v1.2 for Roland MKS-80, a free upgrade for all iMKS-80 v1.1 users.

iMKS-80 v1.2 offers:
- a redesigned look & feel for enhanced readability plus some very tiny UI adjustments to make the workflow even better
- parameter default value buttons. In v1.2, if you touch the parameter value label, it resets the label / slider to a default value (ex: VCO wave = Saw; VCF Freq = wide open, etc...) for each parameter... this is the fastest workflow you'll ever get in sound designing!"
iMKS-80 - iControlMIDI
iPads on eBay

at 4/19/2011 11:37:00 AM

via Intel Mac:
"Using MidiTouch (about $20) on the iPad with these Blofeld Templates you'll be able to unleash the power of this monster! The 4 knobs on the Blofeld doesn't cut it, there are 5 pages of parameters giving you access to nearly all the controls. (Sample support and Arppegiator coming soon)

MidiTouch for iPad

Blofeld Templates

Apple Camera Connection kit

Alesis USB to Midi Cable

I use the Alesis USB to Midi Cable and the Apple camera connection kit, the iPad powers it just fine, so you don't need an extra power supply. It works over Wifi too, when transmitting Sysex is supported."

iPads on eBay