Spirits Of The Temple Electric

YouTube via JohnLRice.
"This was a modular synth patch similar to the one used in my "They Don't Care What You Do" video. I was using it to play around with watching the output run through an oscilloscope to see what it looked like. I started liking the audio and I thought a video tape of the o-scope would be good enough for a quick and dirty YouTube video. Once I started playing around with video effects though, the whole thing turned into something breathtaking and mysterious! (IMHO of course! ;-)

Watch it once through as is and then go back at watch it again and randomly pause the playback in many places and you may be surprised at the images you see! I see different faces (human/animal/???), bodies, buildings, structures and cosmic landscapes etc . . . many with seemingly very iconic spiritual/religious overtones! I mused that by chance I had stumbled upon a way to view an alternative electronic dimension and the beings or spirits that live and rule there! (I sure do miss those old Outer Limits TV shows! ;-)

So, I hope you enjoy this. I may make a second version in the near future with the same music but just a selection of the images as a slide show so it will be easier to ponder and let your imagination run wild.

Thank you are taking the time to watch, rate and comment!"

ARP Odyssey MKII 2813 Final Test After Restoration

YouTube via Thalassa77
"http://switchedonsynthesizer.blogspot...

This is final test that I made to this ARP Odyssey after have finished the restoration.

I'm cheeking all sliders and also CV/gate control and the external audio input. "

Rectifier

YouTube via maertsemil
"Malgorithm Plague Bearer MFB PlanB LFO Doepfer 199"

Plagorithm

"MFB-02
Plague Bearer [flight of harmony]
Malgorithm [the harvestman]"

Gristleized Drone Commander

Untitled from Phillip Walker on Vimeo.

"This is a demonstration of a Drone Commander made by Eric Archer (ericarcher.net) being run through one of the new Gristleizers made by Endagered Audio (smashingguitarsasheville.com). The original Gristleizer was created by Chris Carter of Throbbing Gristle and Chris & Cosey (thanks Chris). Also involved in this piece is a cruddy stereo reverb made by Realistic."

Update: you can find more at loop12.org

Thingamakit Demo

Thingamakit Demo from Phillip Walker on Vimeo.

"This is a demonstration of a Thingamakit I purchased and built from Bleep Labs. I painted it gold and dubbed it 'Ft. Knox'"

The Logan String Melody (part 2 of 2)

YouTube via OriginalJambo. Part 1 here.
"DISCLAIMER:

Many of the images used in this video were taken from a Google images search. If you are the owner if any of these images and do not approve of their use in this video, please contact me and I'll remove them.

Hey guys, been a while since I did a video but I've had this project in mind for some time now. Took a good few days to gather the raw materials and a few more of fiddling with Pro Tools, Fireworks and Windows Movie Maker (which will crash if you so much as look at it the wrong way)!

Anyway, this video might be a little slow for some people and bear in mind there may be room for improvement. Please leave some comments (constructive criticism more than welcome) if there's anything you'd like to know or think I should change.

This is part 2 of 2, which mainly focuses on the sounds of the Logan String Melody.

Hope you enjoy it!"

202

YouTube via PeffTV

Bromus - Fraunhofer Lines (Korg DW-8000 demo song)

YouTube via BromusTbg
"Bromus - Fraunhofer Lines

Song recorded with Korg DW-8000 synthesizer only. All synthetic sounds came from this synth, only rythm is created from the Roland's TR-606/808 samples.

Used Stuff:

Hardware:
- Korg DW-8000
- Smallstone Phaser mk2

Software:
- Roland TR-606/808"

Robosynth DIY Wind Controllers, Robotics and More

http://robosynth.blogspot.com/
See the site for more. The following is just a snip on the Mark II Wind Controller. You'll find samples on site.


"The circuit boards are housed in a wooden case made from cherry and walnut with some decorative inlays on the bottom part. The main body of the case was assembled as an octagonal assembly, but was rounded on the outside for that traditional instrument look and shape. There are three circuit board assemblies, the main board that has the processor and other active circuitry, an upper switch assembly for the fingering buttons, and a lower switch and LED assembly. The lower assembly connects to the main board before being inserted into the case. The upper switch assembly is also inserted into the case and connects to the bottom half sandwich with a small ribbon cable."

MOTM E340 Cloud Generator demos

"Final DSP code is 99% completed for the Euro rack version Cloud Generator (8 VCOs with voltage-controlled spreading, chaos and chaos bandwidth).

4 Sawtooth waves synch'd to external MOTM-310 uVCO, direct output
www.synthtech.com/demo/e340/e340_saw_sync.mp3

4 Sine waves with various modulations on all 4 CV inputs, direct output
www.synthtech.com/demo/e340/e340_sine_mod.mp3

8 sawtooths passed through a MOTM-440 VCF:
www.synthtech.com/demo/e340/e340_saw_440.mp3

4 sines modulated and sent to t.c.electronic M3000 reverb:
www.synthtech.com/demo/e340/sine_reverb.mp3

8 saws with Chaos/Chaos BW modulated then sent to MOTM-410 Triple ResonantVCF (talking robots!):
www.synthtech.com/demo/e340/e340_saw_410.mp3

MOTM-650 MIDI-CV dual arpeggiators, 8 sines with reverb/delay (t.c. FireWorx):
www.synthtech.com/demo/e340/e340_sine_seq.mp3

Paul Schreiber
Synthesis Technology"