CHIMERA BC16

via this auction
"BLURB FROM THE SITE-
The bC16 miniature patch synthesizer packs a fully featured VCO, LFO, envelope generator, analog VCA, analog VCF, noise sources & ring modulator all in a CD sized case CNC machined from 10mm high-grade acrylic plastic.

Fifteen color coded potentiometers control key functions, connections between synthesizer sections are done using twenty-five 2mm mini-banana sockets.

Powered by either six AAA batteries or by an external (not supplied) 9 to 12v source, the bC16 can be used free standing (internal headphone amplifier), linked to an external keyboard/sequencer or MIDI-CV converters, combined with other bC16's, etc...


VCO: The complex VCO (actually two linked VCO's) waveshape can be adjusted through sine/triangle/sawtooth and square wave (with adjustable dutycycle). The VCO can be CV modulated (log response), FM modulated (linear response) or can be driven by MIDI NOTE values. The two linked VCO's can be offset using a control knob, CV or MIDI for rich complex tones.

LFO: Like the VCO the LFO is actually two linked low frequency oscillators with a host of modulation possibilties and waveshapes. Like the VCO the LFO can also be controlled via MIDI.

VCF: An all analog 24dB discrete ladder filter with variable cuttoff (knob and CV), adjustable resonance, specially designed to work from the low voltage busses in the bC16.

EG: The bC16 envelope generator is very easy to use, four knobs (or via MIDI) control the Attack, Decay, Sustain and Release parameters of the envelope. Set sustain to zero and the EG enters repeat mode for long VCS3 style modulation possibilites.

VCA & HEADPHONE AMP: An analog voltage controlled amplifier is provided along with an built-in headphone amplifier (volume control via grey knob).

MIDI INTERFACE: An enhanced internal MIDI interface allows control (monophonic) of:
NOTE to VCO FREQUENCY
ENVELOPE triggering (patchable trigger output)
PITCHBEND (including pitchbend amount via RPN)
PORTAMENTO on/off
PORTAMENTO rate
MODULATION (bC16 has modulation output)
REMOTE/OVERRIDE control of 12 of the 15 knobs via CC# and/or NRPN

ARPEGGIATOR: An internal arpeggiator allows you to control arpeggio's (rising, falling, rising/falling, ordered) via either an internal clock (20 to 6,000 BPM) or via an externally supplied MIDI CLOCK (BPM/2 to BPM x24)."

VINTAGE PROPHET 5 ANALOG SYNTH - REVISION 1 - #173

via this auction

"This is one of the last version 1 models produced. It is serial number 173 (only 182 revision 1 models were ever built making this a rarity indeed!) It was hand-built."

Memorymoog LAMM

via this auction

"It has the LAMM modification, revamping this synth to be extremely stable and modern. Some of the most notable features of the LAMM upgrade include full MIDI CC control of every knob and button, a NEW much nicer screen stereo outputs, velocity, and stable tuning. For a full description of the Lintronics upgrade please refer to http://www.lintronics.de/lamm.html."

KORG ELECTRIC GUITAR SYNTHESIZER X-911 with Overlay

via this auction

via Impostor

"Synthwood Pro One, an MS-20 controller, Novation Nocturn, Arturia Analog Factory Experience keyboard and some Apple equipment. I’ve since bought a beautiful Jupiter 4 which you can see in the attached photo. Its very much old meets new and will be more so when I get myself an iPad."

Synth Core A

"'Synth Core A' is a development board I designed to create my own audio synthesizers. It is composed of a 32bit microcontroller with DSP features, a CPLD , and other standard elements usually found on synthesizers like MIDI, potentiometers, LCD, stereo DAC, USB ... The initial idea when I started the project, was to design a board with most part of the hardware and drivers I would need to create my custom medium range audio synthesizers. Having the board and the most important drivers ready will allow me focusing on the pure audio and interface design tasks every time I develop a new system."

See the link above for more. via Tolaemon.

Anyware Instruments - SEMtex XL Analog Synth & WEM Watkins Copicat Model Super IC Tape Delay

via this auction

"ANYWARE INSTRUMENTS SEMTEX "XL" Desktop SEM Clone. Those box has the Serialnumber #25 and was recently serviced by Anyware itself; thereof it has the last current MIDI Firmware and fixed some small 'Issues'."

Also see the seller's WEM Watkins Copicat Model Super IC Tape Delay listed here.

CLICK FOR MORE »

NL001.wmv

YouTube via bluelantern320 — April 18, 2010 — Custom made Noise Lab for live use
bluelantern on Ebay

NL002.wmv


NL003.wmv

The Sherman Filterbank loves the System A-100 forever

YouTube via inbetweenmovements — April 18, 2010 — "The style of the video + title refers to one of the best ACID You Tube Videos: "TB-303 loves the TR-909 too"
Gear used: Doepfer System A-100, A-110 VCO ---- Signal in Sherman Filterbank 2, A-190 MIDi CV-SYNC Interface triggers the ADSR of the Sherman FB, A-140 ---- AM in of Sherman FB, Drums: AudioRealism Drum Machine (ADM) vsti plugin.
Pattern are triggered via APC 40
In the beginning and the end of the video you hear the pure pw of the A-110 VCO"

TB-303 loves the TR-909 too

YouTube via aszent — August 19, 2007 — Old ladies rockin'

cyberspacecowboys — April 18, 2010 — Mr.Takahashi is a one of devolopper KORG monotron. It was done in KORG Blogger's meeting at KORG Japan A studi

YouTube via GruithuisenCityMan — April 18, 2010 — "Hello ! My name is Frederic Gerchambeau. I have made this movie and this music. The music has been made with Plogue Bidule sequencing 2 Doepfer Dark Energy. The sounds of these 2 Doepfer Dark Energy has been reintroducted into Plogue Bidule in order to permit the 2 Doepfer Dark Energy to frequency modulate together. Plogue Bidule plays also the solo synth. The all thing has been made in one take and has been a bit edited with Audacity (short stereo delay and pitch downshifting added). Enjoy !"