Sequential Circuits Pro One with custom wood case

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Sequential Pro One ——- beautiful 100% functional analog mono synth , fully refurbished (all pots and switches cleaned, caps replaced, J-wires cleaned, bushings replaced and full wood restoration by synthwood.) This unit has an absolutely gorgeous wood grain finish, as well as a backlit pitch and mod wheel (that are either solidly on, or the mod wheel flashes in time with the LFO.)

There’s not much to say other than this unit is ready to rock, has been fully overhauled, looks amazing and sounds like a million bucks. If you are looking for the real deal, here it is - no gimmicks, lines, or questionable work."

CLICK FOR MORE »

Turqoiz

Published on Sep 22, 2017 Peter Maas

"Old Skool Electro yam - Inspired by the Dutch Westcoast Heroes such as IF and Legowelt. Sorry for the abrupt end... something to sort out soon :)"

Pro-One with Synthwood case.

PROPHET-5 REV2 with African Padauk Synthwood Case

Note: Auction links are affiliate links for which the site may be compensated. via this auction

"Prophet-5 Rev2 in working condition with updates
New synthwood.com African Padauk exotic wood case
Power supply update eliminates the need for -5v and +12v regulators, keeps heat down and improves stability
Latest 7.0C version ROMs
Cassette mod for dumping patches in and out via AFSK
Several old tantalum capacitors replaced
Factory presets are loaded
New small Prophet-5 and Sequential Circuits badges
New set of knobs
Several pots and switches have also been replaced with new ones
New keyboard bushings, keyboard was taken apart and completely cleaned
The synth plays very well and tunes up within 10-15 minutes of powering up.
The power supply update improves the stability of the microprocessor and also eliminates the need for two supplies which reduces load as well as heat.
The rev2 prophet-5 is most famous for its SSM chips. The rev2 has the SSM filters and envelope generators which most Prophet-5 say give it a distinction over the rev3 curtis based synths.
The new wood case is made from a beautiful exotic wood called African Padauk. The original case was walnut, but was cracked and chipped."

Korg MonoPoly with Synthwood Case & Synhouse MIDI

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"Comes with Synhouse's MIDIJack installed. The original (cheap) cabinet has been replaced by a beautiful maple quilted cabinet made by Synthwood - the pictures don't do it justice. Extra parts included: 2x original knobs; a Korg Polysix CHORUS board; and a Korg Polysix control board for the CHORUS. These boards were taken out of a working Polysix many years ago and I have no idea if they work or not - it is very likely that these boards do not work any longer and may be in need of repair. At some point I wanted to add the Polysix's CHORUS effect to the MP, but never got around to doing it. So here they are in case you are interested in doing the mod. Comes with a copy of the manual and MIDIJack's docs."

CLICK FOR MORE »

Synthwood Custom Sequential Circuits Prophet-5 Backlit Clear Acrylic Wheels

via Synthwood

- Features a self-centering pitch bend mechanism (designed by Bob Moog)

- Colors: white, yellow, violet, aqua, red, green, blue and off

- pitch and mod wheel colors can be set independently (see red / blue)

- Uses new bournes pots

- Can be cleanly reversed back to stock mechanism - not a permanent mod

http://synthwood.com

CLICK FOR MORE »

ARP Odyssey MK III with Synthwood Walnut Wood Sides and Trim

via Synthwood where you'll find more pics.

Custom job for artist Lusine.

Portland Synth Meet

Pictured: Sequential Circuits Pro-One in Synthwood case and some Technosaurus in custom case.

Slideshow below.

via Illuminated Sounds

Update via Steamy Vicks in the comments: "It's a Pro-One - not a Prophet 5." Corrected above.

Mike McKnight's Moog Taurus 2 II with Synthwood Panels for Auction

via this auction

"Moog Taurus II 343 A and 343 B bass pedals and synth. The synth engine part of this is basically a Moog Rogue... The panels on the synth portion (top) are from Synthwood and are curly maple, and the wood panels on the pedal portion are the originals... I am a respected musician, programmer and have written for Keyboard Magazine. More about that here."

CLICK FOR MORE »

Sequential Circuits Pro One with Synthwood Case & Clear Mod Wheels

via this auction

"This is a rare opportunity to buy a Pro One already fitted with a Synthwood case! This is the J-wire version with the power supply mounted directly to the chassis."

CLICK FOR MORE »

SEQUENTIAL CIRCUITS ANALOG SYNTHESIZER PROPHET-5 REV2

via this auction

"Prophet-5 Rev2 in working condition with updates - Serial Number #0483
- New synthwood.com African Padauk exotic wood case
- Power supply update eliminates the need for -5v and +12v regulators, keeps heat down and improves stability
- Latest 7.0C version ROMs
- Cassette mod for dumping patches in and out via AFSK
- Several old tantalum capacitors replaced
- Serviced by Analog Synth Service this year
- Factory presets are loaded
- New small Prophet-5 and Sequential Circuits badges
- New set of knobs
- Several pots and switches have also been replaced with new ones
- New keyboard bushings, keyboard was taken apart and completely cleaned"

Additional pics at the auction. Some shots of the inside there and below.

CLICK FOR MORE »

Rare Latronic Notron MkII Midi Step Sequencer

via this auction

"Only about 150 Notrons were made, and production on them has been discontinued. So, already, it is a collectible instrument and will surely increase in value as time passes...

It does different reset points for each sequence, can output 4 different sequences, It does LFO shapes, wierd ass stuttering things, step length stuff, pitch bend and mod wheel macros, chords on steps, some time-stretching emulation sort of tricks, delays, strums and reversals. Some of the other neat stuff was being able to group changes across multiple steps, and all of it in real time. Pretty wild box.

http://www.youtube.com/watch?v=_3zUoekEz6U [below]
http://www.youtube.com/watch?v=9FYryXXYSEw [below]

There is a better explanation in the SOS MK 1 review
the manual
mailing list

Total Weight = @9kg
UK bidders only - postage by ParcelForce Recorded Delivery will be @22 GBP"

CLICK FOR MORE »

Synthwood Custom Korg MonoPoly

more pics on Synthwood

# Solid black walnut front and sides
# MDO cabinet grade plywood base (painted with latex black enamel)
# Independently RGB LED backlit wheels
# Build for Skycheck / Kuma's Playground

Synthwood ARP Odyssey and Axxe MK III Custom Wooden Case

No visible screws.

More pics on Synthwood here

# Shown in Walnut (Available in figured maple and others)
# Requires at least 6 screws (internally) to mount the wood


Update: The case in these pics was made for James William Glass of Impossible Hair.

Custom MEK with Blue Side Panels

via Ivan:

"Finally got my custom wood end pieces and different knobs put onto my MEK. End pieces by Synthwood and then I had them custom finished"

CUSTOM ARP AXXE ANALOGUE SYNTHESIZER IN WOOD CASE

via this auction

Case by synthwood.com

CLICK FOR MORE »

Synths and Distortion

via Max Murders

"living in the rack : Evol Fucifier, Ebbe-und-flut, Sherman Filterbank 2. Dwarfcraft Devices synth mangler, OTO biscuit, METASONIX Assblaster, WMD geiger counter, Malekko Bassmaster.

and a photo of a few synths im using in the studio: Mattson mini modular, Infernal Noise Machine. and Synthwood Moog Prodigy. thanx to george mattson for being awesome."

Synthwood Roland Juno-6 / Juno-60 Wood Case

Top: Original particle board
Bottom: Synthwood solid walnut

More pics and details here.
Update: better pics added.

http://synthwood.com

via Impostor

"Synthwood Pro One, an MS-20 controller, Novation Nocturn, Arturia Analog Factory Experience keyboard and some Apple equipment. I’ve since bought a beautiful Jupiter 4 which you can see in the attached photo. Its very much old meets new and will be more so when I get myself an iPad."

DIY Sequential Circuits Prophet-600 Analogue Synth Case

via this auction

# Sequential Circuits Prophet-600 metal case: hinged lid and base
# Newly made SYNTHWOOD.COM Mahogany wood sides
# Newly made Technology Transplant membrane data entry pad
# DIY wheel box - case would need to be modified for wheel box to fit
# I may have the original wheel box, but have not been able to find it - when and if I do, its yours!
# MIDI din connectors, IEC power entry, fuse housing and power switch