YAMAHA CS-10 SN 6711 with Original Case

Note: Auction links are affiliate links for which the site may be compensated.
via this auction
tokywax (RSS)

CLICK FOR MORE »

Studio Electronics ATC-1

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"Studio Electronics ATC-1. It comes with the MiniMoog style filter cartridge. The filter is removable and can be swapped out on the fly for an ARP 2600, Oberheim SEM, or 303 Style filters, but only the Moog is part of this auction. The others can be purchased for about $150 each."

STEIM's junXion - Data Processing and Mapping for Game Controllers & Video

what's junXion? from STEIM Amsterdam on Vimeo.

"tutorial #1 about Steim's data processing and mapping software junXion, which can be used to translate game controllers, video, osc, arduino's into MIDI and OSC messages. The tutorial is presented by Andreas Otto, a.k.a. Springintgut."

using a joystick with junXion from STEIM Amsterdam on Vimeo.

"tutorial #2 about Steim's data processing and mapping software junXion, which can be used to translate game controllers, video, osc, arduino's into MIDI and OSC messages. The tutorial is presented by Andreas Otto, a.k.a. Springintgut."

using Timers in junXion from STEIM Amsterdam on Vimeo.

"tutorial #3 about Steim's data processing and mapping software junXion, which can be used to translate game controllers, video, osc, arduino's into MIDI and OSC messages. The tutorial is presented by Andreas Otto, a.k.a. Springintgut."

using the Wiiremote as a musical instrument from STEIM Amsterdam on Vimeo.

"tutorial #4 about Steim's data processing and mapping software junXion, which can be used to translate game controllers, video, osc, arduino's into MIDI and OSC messages. The tutorial is presented by Andreas Otto, a.k.a. Springintgut."

using video tracking in junXion, part1 from STEIM Amsterdam on Vimeo.

"tutorial #5 about Steim's data processing and mapping software junXion, which can be used to translate game controllers, video, osc, arduino's into MIDI and OSC messages. The tutorial is presented by Andreas Otto, a.k.a. Springintgut."

video tracking with junXion, part2 from STEIM Amsterdam on Vimeo.

"tutorial #6 about Steim's data processing and mapping software junXion, which can be used to translate game controllers, video, osc, arduino's into MIDI and OSC messages. The tutorial is presented by Andreas Otto, a.k.a. Springintgut."

RECO-SYNTH ::: The Jolymod II :::

RECO-SYNTH ::: The Jolymod II ::: from arthur joly on Vimeo.

"2 - 16 steps analog sequencers / 2 - Voltage Quantizers / 3 VCOs / 1 - 12Db Filter / 1 - 24 Db Filter / 1- Minimoog Filter / 1 Noise / 2 - LFOS / 2 - ADSRs / 1- Phase Shifter / 1 - Sample n' Hold / 1 - Phase Shifter / 2 VCAs / 1 - Divider / 1 - Vocoder / 1 - Ring Modulator / 1 - Oscilloscope / 1 - 4 Channel Mixer / 1 - Midi to CV / 1 - Fuzz / 1 - Joystick.

recosynth.com"

MaxVlog = Scope Drum

YouTube Uploaded by MrNedRush on Apr 10, 2012

"just messing around looking at snythesised drum sounds through oscilloscopes. i cant spell oscilloscopes i think."

RC CIRCUIT BENT DUB SIREN SOUND EFFECTS UNIT

YouTube Uploaded by djwidow420 on Apr 11, 2012

"COMPACT DUB SIREN WITH A HEAVY SOUND"

Resonance Circuits on eBay (RSS)

3d Granular Synthesis Engine

YouTube Uploaded by metabog on Apr 10, 2012

"A project I'm doing for a university assignment. It's a 3d exploration-based granular synthesis engine. It evolved from my previous sine web project, but it's still in the early stages. It has a sonified particle system with gravity."

Monomachine-Elektron

YouTube Uploaded by Seb colo on Apr 11, 2012

Roland 80017a Chips Removal - GR-700 MKS-30 Juno 106

YouTube Uploaded by WayneJoness on Apr 11, 2012

"http://www.joness.com/gr300 This video shows the removal of a 80017a chip from a GR-700 printed circuit board. The tools I used were a Radio Shack 30 watt soldering iron, desoldering wick, soldering helper, and Caig DeoxIT D5. The basic Radio Shack 30 watt soldering kit has almost everything your need. I find that spraying the Caig DeoxIT D5 between operations helps keep the PCB clean, and helps the old solder flux move on to the desoldering wick. After I have removed the solder from the pins, I used the soldering helper to line the pins up, then gently rock the chip back and forth to make sure everything is loose. Rather than pull the chip out, I first push on the pins on the soldering side, then gently tug at the chip. It comes right out. If you have not tried this before, I recommend practicing on some spare parts, as this can be tricky and frustrating."

Sequence Live... Test... New configuration in studio (NightBirds Electronic Music) 2012

YouTube Uploaded by NightBirds31 on Apr 10, 2012

"Here's a little recording, a bit long, but with a new sound color. I changed up some synths of places, for to be better in my recordings. While this is not perfect yet, I continued to use my resources for future... and upcoming recordings...

Recorded with : KORG PS 3100, ARP Odyssey, RSF Kobol, ROLAND System 101 & 102 (x2), ROLAND MC-202 & ROLAND TR 707 (for synchronisation with DOEPFER MAQ 16/3 & MC-202)

All videos creations by NightBirds.
Publication & Copyright by NightBirds Electronic Music - 2012"