Blacet 2100 VCO - +or-1 Octave Shift w MAQ 8 of 16 seq

Blacet 2100 VCO - +or-1 Octave Shift w MAQ 8 of 16 seq from N K on Vimeo.

"MAQ16/3 Row 1 sequence is 16 steps, and Steps 1-8 have a 16th note, Steps 9-16 are Off. The MAQ16/3 CV 1 Out goes to the CV In of a Doepfer A-156 Dual Quantizer which forces the voltages into a major scale. The A-155 sequencer’s 8 step sequence goes to the Transpose In of the Quantizer. The Blacet VCO Octave Shift is controlled by an A-145 LFO Ramp shape, with Reset from Row 2 of MAQ16/3 set to every ¼ note. Another LFO (Doepfer A-146 LFO2) creates a slow, narrow pulse which modifies the decay time of a Doepfer A-142 VC Decay, which in turn controls the VCA. You may hear the notes go from short to long."

Update: Full post with additional details on Modular experiments here.

Meeblip 4u Rack Synth by S-CAT + Dubsta delay/TR-909/xoxbox/Mackie 1402

Published on Feb 14, 2013 PHONICPOTION·430 videos

"Jam session with the Meeplip."

S-CAT on eBay (RSS)

New Enclave Flight Eurorack Cases

"The Enclave Flight Cases have landed……………….

Since Media Décor introduced its line of Enclave studio cases at NAMM, musicians realized the quality of our design and execution and have requested us to build portable cases. Our design team put their heads together and designed the Enclave Flight Series carrying cases from the ground up.

The case construction is unique: Instead of the typical screws and brackets and butted corners of conventional cases, we used solid machined dovetail construction for a seamless contoured monolithic design. Typically the industry standard has been to cover the cases with Tolex or fabric. The problem with this is that it can tear or stretch. Our solution was to completely encase the case inside and out with a military grade ballistic coating.

To maintain structural integrity, all hardware is thru bolted with locking washers. The radius corners are further protected with chevron corners. Attention to detail is vital: there are even built in strap eyes on the 6U for a padded over the shoulder carrying strap.

We decided to use Vector T-rails for the module attachment. The rails themselves have no slot for adding the nuts. They are simply removed by the user for adding or removing the attachment nuts.

Power is always of great concern to the user. Our solution is to offer the units unpowered or powered by the appropriate Makenoise Power System because of it high quality specifications and industry acceptance.

Photographs do not do justice to the Enclave Flight Cases. They are to be touched and used to appreciate the new level of aesthetics, function, and durability we have brought to the synthesizer case industry.

Enclave Flight 6U Features:
• Solid Dovetail Construction – no screws to pull out
• Hardware is thru bolted with locking washers – no screws
• Military Grade two part polyurethane elastomer coating inside and out; Fabric Free (No Tolex to Snag or tear)
• Chevron Black Polymer Corners
• Back Rubber Feet
• Meets all Airplane carry on requirements; only 11 lbs without modules
• Vector Rails with Sliding Nuts. Rails have no slots for losing nuts. Rails are easily removable for adding or removing nuts; 20 nuts per rail and 80 screws
• Fender Carrying handle
• Built In Eye pads for carrying strap
• Shoulder strap with pad
• IN STOCK

Power:
• Make Noise Power Distribution Board
• Switching power for use anywhere in the world
• Outputs: 1.4A +12V regulated, 1A -12 regulated, 250mA +5V regulated
• 24 euro power connectors
• No heat, Low Noise and Stable
• Automatic ramp down to shut-off when current draw exceeds 2.2A
• Delayed power up to avoid false blowing of fuses
• Super Efficient, averaging 90% efficiency.
• Unique design allow for powering two rows without the need for a passive bus board

Enclave Flight 3U Features:
• Solid Dovetail Construction – no screws to pull out
• Hardware is thru bolted with locking washers – no screws
• Military Grade two part polyurethane elastomer coating inside and out; Fabric Free (No Tolex to Snag or tear)
• Chevron Black Polymer Corners
• Back Rubber Feet
• Meets all Airplane carry on requirements; only 7 lbs without modules
• Vector Rails with Sliding Nuts. Rails have no slots for losing nuts. Rails are easily removable for adding or removing nuts; 20 nuts per rail and 80 screws
• Carrying handle
• IN STOCK

Power:
• Make Noise Mini-PWR
• Switching power for use anywhere in the world
• Outputs: 800mA +12V regulated, 500mA -12 regulated, 250mA +5V regulated
• 2 euro power connectors for connecting Bus Cables
• No heat, Low Noise and Stable
• Automatic shut-off when current draw exceeds 1.2A
• Lightweight and low profile (less then 18mm height)"

http://www.mediadecor.com/enclave/

Vintage Rare Electro Harmonix Electronic Crash

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Electro Harmonix Electronic Crash. It's a cool little electronic drum that can be activated by tapping the cork pad, or by an external trigger. EHX originally made a whole set of these and a sequencer that could control them all. The pedal works and is in decent cosmetic shape for its age. There are no videos of this one online. It basically starts as white noise that you can shape, envelope, and filter to create different sounds - many of which resmble closed hi hats or crash cymbals of early analog drum machines."

CLICK FOR MORE »

Kilpatrick K4815 Improvisation

"Improvisation testing the Kilpatrick K4815 pattern generator.

The K4815 is generating the sequencer pattern via the Doepfer A-110 VCO, while the harmonies are played from Diva, and synth runs from the Minimoog."

via Paul Lawler on The MATRIXSYNTH Lounge

Electro Harmonix Super Space Drum

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Korg MS-10 SN 135737

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

grendel graph²

Published on Feb 14, 2013

4 ms Peg RCD VCA Matrix
Analogue Systems RS 100 RS 110 RS 360
Arp Odyssey 2811 noise
Bananalogue Serge VCS
Cyndustries TZO
Doepfer A 134 panning by A 143-9 & Moog MP201
Flame Chord Machine
foh choices
Grendel Formant Filter
Make Noise Brains PP Maths Moddemix Optomix QMMG René Wogglebug
Malekko 4x Anti 4x Unkle & Jag
Moog 4x freqbox CP251
Roland System 104 Sequencer
SSL Modulation Orgy
Tiptop Audio Z 8000
Toppobrillo Quantimator Sportmodulator TWF
Logic Master clock to Kenton Pro 2000 II
FX Boss VF1 Line6 Echopro TC M3000

Mutable Instruments & Rat

mutable-contest-001 flickr By David De Tautavel

Medic Defibrillator - Your New Bloody Valentine Eurorack Module

Follow-up to the video teaser here. The Defibrillator is the first of the new Medic line of eurorack modules from Analogue Solutions' Tom Carpenter. Note the apostrophe. Medic is a new brand from Tom.