Electribe 2 Chilled Drum & Bass Jam

Published on Jan 24, 2015 KlaatuNinja

Korg Electribe2s on eBay

MFB DOMINION 1 at NAMM 2015 BBoyTechReport.com

Published on Jan 24, 2015 BBoy Tech Report

"Stumbled on this great analog synth at NAMM. It's not totally new but I found it pretty intriguing none the less. It sounds great. Sorry, no direct audio but thanks to the iRig Mic Field we got a pretty decent recording of the audio from the synth.


-------------------
DOMINION 1 offers three oscillators for maximum flexibility. Each waveform can be varied in symmetry. Besides altering the pulse width of a rectangle, you may also continuously turn a saw tooth into a triangle and a triangle into a sine. All oscillators also offer ring modulation, one of them is an analogue circuit! In addition, VCO 2 and VCO 3 can be synced to VCO1. Finally, VCO3 can modulate the frequency of VCO 1 and VCO 2 and is dynamical controlled by LFO or AD Envelope. The analogue oscillator circuit is processor-controlled for stable tuning. To complete the available sound sources, noise or an external audio input can be added to the VCOs in DOMINION 1's mixer section. The redesigned SED Filter offers now 12 variations like four Lowpasses, two Highpasses, two Bandpasses and two Notches.

* Programmabele Analog Synthesizer with 3 Octave Keyboard
* 2 Ribbon Controls, Arpeggiator/Sequencer, Velocity&Aftertouch
* 3 VCOs with Waveshaping, Analog&Digital Ringmodulator
* Dual-Sync and dynamic FM, Noisegenerator
* 12 fold redesigned four stages SED Multimode Filter
* Huge Patchfield to speak with world of Modulars and CV/Gate
* Velocity-Routingmatrix with 12 destinations
* 3 LFOs, 2 with One-Shot-Function and Reset
* 3 Envelopes with 70mm Faders
* Intuitive Handling and Quality Hardware, internal Power Supply
* Midi Dump, In, Out, Thru"

NAMM2015 Tiptop Audio Circadian Rhythm and Serge Eurorack

Published on Jan 23, 2015 Analogue Zone Showroom / Hangszer

"Gur Milstein Introducing the new Tiptop Audio Sequencer, the Circadian Rhythm and Serge modules at the NAMM2015 Show"

http://www.tiptopaudio.com

NAMM2015 The Harvestman Introducing The New Double Andore

Published on Jan 23, 2015 Analogue Zone Showroom / Hangszer

"Scott Jaeger Introducing the new The Harvestman Double Andore at the NAMM2015 Show"

Double Andore MKII

http://theharvestman.org

NAMM2015 Pittsburgh Modular Introducing New Eurorack Modules

Published on Jan 23, 2015 Analogue Zone Showroom / Hangszer

"Pittsburgh Modular Introducing New Eurorack Modules at the NAMM2015 Show"

New Modules:
OSC V2
Analog Replicator - announced in December.
Time Runner - previously released as limited edition.
Chain Reactor - previously released as limited edition.

http://pittsburghmodular.com

Some details on the OSV V2:

"Analog Utility Oscillator
Suggested Retail Price - $179

A wide range, compact, analog VCO with a simple but 100% useful feature set. The streamlined Oscillator shares the same saw wave oscillator core circuitry as the larger Waveforms oscillator module providing it with massive analog triangle, saw, and pulse waves. The Oscillator offers 5 octaves of 1 volt per octave tracking, a frequency range starting as low as 7 seconds per cycle, allowing it to double as a reliable voltage controlled LFO, and an attenuated CV input that can be used for linear frequency modulation or pulse width modulation.

Simultaneous Triangle, Saw, and Pulse Wave Outputs
Excellent Logarithmic Conformance
Temperature Compensated 1 Volt Per Octave Operation
Sawtooth Wave Based Oscillator Circuit
Linear Frequency Modulation
PWM Input: 5% to 95%
LFO Below Audio Frequency Operation

OSCILLATOR CONTROLS:
Frequency and Fine Tune Controls - Full range sweeping coarse tune and limited range fine tune knobs.

CV Input - Frequency modulation or pulse width modulation CV input and attenuator.

FM/PW Switch - CV Input frequency modulation or pulse width modulation destination selector switch.

Oscillator Patch Points:
1V/O IN - One volt per octave CV input.
TRIANGLE WAVE OUT - Triangle wave output.
SAW WAVE OUT - Saw wave output.
PULSE WAVE OUT - Pulse wave output."

OB8 Jam vid

Published on Jan 23, 2015 Dylan Nau

"To be surrounded by such awesome musical instruments is a treat. I am blessed to be able to play music with these synths. TR8 is the clock for the Analog 4 which is sending CV trig and gate to the ARP Odyssey. OB8 is running through Eventide Space into the TR-8 inputs. I make up this music just for an excuse to play on these keyboards."

Roland CR-78 with a Fenix I & Fenix III

Published on Jan 23, 2015 DJjondent

"A bit of an experiment. The Roland CR 78 is sometimes difficult to sync as it requires a clock of 48 counts per measure. The Fenix III sequencer luckily has a clock divider module.

Some pics are extras are here:
http://djjondent.blogspot.com.au/2015..."

Roland Jupiter 6 Synthesizer

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Noyztoise NT03 & DRUM SYNTH

Published on Jan 23, 2015 noystoise

SYNTHDRUM


Update: Some details for the DRUM SYNTH via Noyztoise. Click through each link for additional pics & details.  Details for the NT03 aren't up yet as of this post, but it appears to be a follow up to the NT02 featured here.

Update: info on the NT03 is now on Noyztoise. Image and some info captured below for the archives.

DRUM SYNTH

"This project began in early December of 2013. it was originally a commission, but the deal ended up falling through, and i never got paid for it. hopefully i can find someone out there to buy it from me to make up for my losses.

The original concept was based around the Synare3 circuit. the Synare3 consisted of two CMOS oscillators, a white noise generator, a four-pole resonant lowpass filter, a voltage controlled amplifier, and two envelope generators that modulated the filter cutoff and VCA amplitude.

My task was to build a modern variation on the circuit that would enable CV/EXP. PEDAL inputs to the oscillators, filter, and VCA. this would mean replacing the CMOS oscillators with voltage controlled oscillators. i was also asked to add the ability to 'transpose' the oscillators frequency range, create multiple waveforms, add a 'crossfade' between one oscillator and the noise generator, add a line-in mix, and a pushbutton switch that would fully trigger the envelope generators..."

"The NT03 consists of two square wave voltage controlled oscillators, a holtek voice modulator circuit, a voltage controlled filter(VCF), and a low frequency oscillator(LFO) that can either/or modulate the filter cutoff, gate the voice modulator transpose sequencer."

Novation Bass Station Demo

Published on Jan 23, 2015 perfectcircuitaudio

Demo starts at :43.

"This video demonstrates the sound and features of the original Novation Bass Station. Enjoy!"

http://www.perfectcircuitaudio.com/
Perfect Circuit Audio on eBay