Tuesday, January 17, 2017
Behringer Deepmind 12 Factory Presets
Published on Jan 17, 2017 synthartist69
Playlist:
Behringer Deepmind 12 Factory presets Bank A 1-30
Behringer Deepmind 12 Factory presets Bank A 31-60
Behringer Deepmind 12 Factory presets Bank A 61-90
Rare Waves Grendel Drone Commander 2E + Expander
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"both units work as new, look mint and have only very little rack rash. they will come with original packaging and connection / power cables... please note the main module is a very deep unit (about 78mm) so make sure it can fit your case."
via this auction
"both units work as new, look mint and have only very little rack rash. they will come with original packaging and connection / power cables... please note the main module is a very deep unit (about 78mm) so make sure it can fit your case."
Super Furry Ltd. Edition Atmegatron?
via @SoulsbySynth
"#NAMM2017 announcement 2/3: Pete Fowler (@themonsterist / super furries / #monsterism) designed ltd edition Atmegatron. Booth #5000"
Announcement 1/3 here.
Ciat-Lonbarde Sidrax Organ
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"The Sidrax Organ follows a lineage of electronic musical instruments based on touch. It was redesigned twice, first as Sidrassi, then as Sidrazzi. 
It has seven wooden bars that you press to express seven oscillators within. Each oscillator has its own fine tuning slider, embedded right within its bar. Also, there is a master pitch knob, and a master chaos knob. The master chaos knob makes the instrument go from pure triangle tones to a nest of noise. It does this by gradually increasing modulation from one oscillator to the next in a circular pattern. Sidrax has enough bars to construct sweetest melodies from the triangle waves, whereas Tetrax is a simple four-bar entity, with complexity of tone for funky bass.
There are 44 modulation points brought forth as banana jacks. They are arranged in seven columns, representing the seven bars. Their layout is shifted diagonally, to allow inputs in proximity to outputs. This is for touch-playability; you can make banana jack metal studs that can be squished by hand to gesture-patch the instrument. Inputs are cool colors: blue, green, and grey. Outputs are hot colors: red and orange. The grey jacks are parallel inputs with the master knobs: the one on the left is for master pitch, the right one is master chaos. The color allotment for each bar is as follows:
Two orange jacks, representing the press and release gestures on that bar in voltage.
One red jack, which is the pure triangle output of that oscillator.
Two green jacks, that are "glitch" inputs. They cause the boundary conditions of each oscillator to wire to the output of another. A modulation inspired by circuit bending.
One blue jack, an fm modulation input for that oscillator.
The Sidrax organ has a stereo-mini output on the back. This is because each bar, outputs in different channels during the press/release cycle. In addition to the stereo-mini jack, it has an power switch, and optional built-in batteries, or an external, 9volt battery snap."
via this auction
"The Sidrax Organ follows a lineage of electronic musical instruments based on touch. It was redesigned twice, first as Sidrassi, then as Sidrazzi. 
It has seven wooden bars that you press to express seven oscillators within. Each oscillator has its own fine tuning slider, embedded right within its bar. Also, there is a master pitch knob, and a master chaos knob. The master chaos knob makes the instrument go from pure triangle tones to a nest of noise. It does this by gradually increasing modulation from one oscillator to the next in a circular pattern. Sidrax has enough bars to construct sweetest melodies from the triangle waves, whereas Tetrax is a simple four-bar entity, with complexity of tone for funky bass.There are 44 modulation points brought forth as banana jacks. They are arranged in seven columns, representing the seven bars. Their layout is shifted diagonally, to allow inputs in proximity to outputs. This is for touch-playability; you can make banana jack metal studs that can be squished by hand to gesture-patch the instrument. Inputs are cool colors: blue, green, and grey. Outputs are hot colors: red and orange. The grey jacks are parallel inputs with the master knobs: the one on the left is for master pitch, the right one is master chaos. The color allotment for each bar is as follows:
Two orange jacks, representing the press and release gestures on that bar in voltage.
One red jack, which is the pure triangle output of that oscillator.
Two green jacks, that are "glitch" inputs. They cause the boundary conditions of each oscillator to wire to the output of another. A modulation inspired by circuit bending.
One blue jack, an fm modulation input for that oscillator.
The Sidrax organ has a stereo-mini output on the back. This is because each bar, outputs in different channels during the press/release cycle. In addition to the stereo-mini jack, it has an power switch, and optional built-in batteries, or an external, 9volt battery snap."
maasijam volcasession #06 - Volca (Bass, Keys, Sample, FM), Ambient Jam
Published on Jan 17, 2017 maasijam
"All sounds coming from the KORG Volcas (Bass, Keys, FM, Sample) . For each volca there is an 'External Instruments' track in Ableton Live - so I can use all my effect plugins. Ableton Live sends MIDI Clock to the volcas (Splitted by the MIDI Merger). With the Launch Control XL I can switch between the volcas.
Setup:
Ableton Live 9
Korg Volca Keys
Korg Volca Sample
Korg Volca Bass
Korg Volca FM
Launch Control XL
Akai MPK Mini
ValhallaRoom (I love it)
NI Replika (Delay)
MIDI Merger Miditemp PMM-88
Steinberg UR-44
Recorded directly on a Tascam DR07 MK2."
Weinglas at the premiere of expeRheiniMainental
Published on Jan 16, 2017 Wein Glas
"Is it possible to play a short live performance with only a Gotharman AnamonoX? In total darkness? See and decide for yourself! However, the touchscreen keyboard helped a lot ...
Thanks a lot to Xerox Exotique and to Tilmann Jakob for having me as a guest on the great premiere of the amazong documentary 'expeRheiniMainental'!
http://vimeo.com/191171679
http://xeroxex.de/
http://kunstscheisse.net/ldx40/"
New Bent-Tronics Book: The Ultimate Beginner's Guide to the 555 Timer, + parts kit
Published on Jan 17, 2017 Bent-Tronics
"I wrote a book! Buy it here.
Buy the parts kit here.
More info at http://www.Bent-Tronics.com"
Tiptop Audio Mantis Bag/Backpack
"Mantis padded travel bag is made for a smooth ride. With its multiple straps it can be set to carry side-ways or as a backpack and the waterproof material keeps the elements out too. Internally it features a pouch to carry your Stackcables, power adapter and even a laptop computer.
Isotonik Studios Introduces Circuit Editor PRO & Circuit Patch Store for the Novation Circuit
Circuit Editor PRO for the Novation Circuit from Isotonik Studios on Vimeo.
"In this walkthrough we'll not be delving into sound design but simply showing off the workflow enhancing improvements we've made to our popular Circuit Editor, rebuilding the engine from scratch to massively improve the speed of updates has allowed to us to add core new features such as:
- Both Synth Engines are fully automatable in Ableton Live with the MaxforLive version
- Copy / Paste for the Macro Elements
- Drum Control has been added
- Patch Management has been much improved
- An intelligent Randomiser Function"
https://isotonikstudios.com/novation-x-isotonik/circuit-editor-pro/
P.S. You might remember mention of the new editor from this post.
Additional details including price:
"RELEASE DATE: WEDNESDAY 18th JANUARY
PRICE: £10.00
It's been over a year since we visited Novations headquarters to be first introduced to the Circuit in their development room, this little beast of a Groovebox has gone from strength to strength in the past twelve months growing an avid legion of new fans who have helped the development of the instrument through the Facebook Circuit Owners Group...
We've seen Novation get involved in this group of fans to their credit and it was an honour to be chosen to develop and supply the official Novation Circuit Editor! Now that Novation have released the fourth firmware update, we felt it was time to do the same with our Editor. And so after a few hundred hours more of development time we're delighted to be able to release the Circuit Editor PRO!
Rebuilt from the ground up we've massively improved response times and allowed automation of both synths through Ableton Live via the MaxforLive version. In working with the new Editor Engine we've been able to incorporate the top user requests that we've been collating as well!
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
