VBrazil Modular - Lizard2 mk3 + MultiLFO mk2 - FM Patch

Published on Aug 21, 2017 Ícaro Ferre

"Another patch using the VBrazil Modular system. In this patch, I'm using the MultiLFO mk2 (in VCO mode) as a FM modulator for the Lizard 2 MK3 (set to Mode 6 / Sine HD)."

VBrazil Modular - Lizard2 mk3 HSYNC Mode 3 Test

Published on Aug 21, 2017 Ícaro Ferre

"Exploring the Mode3 of the new Lizard2 mk3 module.
Mode 3 adds 4 oscillators to the main oscillator. These 4 oscillators can be linearly detuned and mixed / added to the output using knobs 1-8.
Sending a gate or trigger to the HSYNC input in this mode makes all 5 waves reset to the same phase, creating a very interesting effect and "enhancing" the beginning of the note.
The VAR button changes the waveform of the 5 oscillators."

Solar Eclipse from Jacksonville Florida Ambient New Age Music Rik Marston 8/21/2017

Published on Aug 21, 2017 SynthgodXXX

"Solar Eclipse from Jacksonville Florida by Ambient New Age Music Recording Artist Rik Marston 8/21/2017

We had VERY POOR conditions today for the Solar Eclipse.
It RAINED most of the day. The footage was 15 minutes from
North Florida 90% Totality. I was VERY LUCKY to get what I got!

Music:
'Spacewalking' by Rik Marston

Synthesizer used:
Korg MicroKORG

All Video & Music:
Rik Marston

Thank you for watching!"

Novation Supernova Patch Demos by Paddy C

Published on May 11, 2016 Paddy C

Playlist:
Novation Supernova Patches 01: Analogue type sounds - 2016
Novation Supernova Patches 02: FX & Evolving sounds - 2016
Novation Supernova Patches 03: Lead Synths 2016
Novation Supernova Patches 04: Digital & Drum 2016
Novation Supernova Patches 05: Vocal, Pads & Keys 2016
Novation Supernova Patches 06: Sequences & Arps 2016
Novation Supernova Patches 07: Triggered Chords 2016

Roland MC-202 SN 351000

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

2PANEL SERGE MODULAR SYNTH

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

::vtol:: motorgan

::vtol:: motorgan from ::vtol:: on Vimeo.

"Motorgan is an electromagnetic/electromechanical organ based on 3 dc motors of different size. The speed of each motor is controlled by voltage changes via touch keyboard with 24 keys. Keyboard is split into 3 parts (registers) for each motor, so it's possible to play chords/polyphonic lines by taking one note from each register. Electromagnetic fluctuations produced by motors are picked up with a single coil guitar pickup. It's possible to tune every key using potentiometers, to make any kind of music by tuning the combinations. It's not the easiest instrument to play and it takes some time to adapt to it.

more about - http://vtol.cc/filter/works/motorgan"

- 3 dc motors (2 PC pc cooling fans and 1 motor with gears)
- arduino mega
- single guitar pickup
- 24 keys touch keyboard
- 6,3 Jack output.
- digital voltmeter for tuning
- 24 potentiometers for voltage control

CLICK FOR MORE »

New DSI Rev2 Demos by Buchla Info

Three new demos have been added to this post.

Modular City

Published on Aug 21, 2017 PaulLawlerMusic

"Multi sequenced patch featuring Rings, Elements, Mother-32 , Koma Komplex Sequencer, Morphagene etc"

Behringer Model D CV Interfacing Demo (by Synthpro)

Published on Aug 21, 2017 synthpro

"Hey Guys,

This video, I demonstrate the interfacing features available using the CV inputs and outputs on the Behringer Model D. I was using a Moog Moogerfooger CP-251 in this demonstration but many things can be used in its place including other synth modules.

Thanks for watching and all the best,
Jareth"

Free Ctrlr Software Editors for Hardware Synths

You can find them here.

Pictured: Editor for the Sequential Circuits Six-Trak.

"It uses MIDI CC control for all available parameters including mod wheel.

Built using CTRLR Revision 1400.

Key things needed to do on the Six-Trak before use:

– To enable changing programs (patches) by MIDI, hold Control Record and press 1.

– To enable changing parameters/mod wheel by MIDI, hold Control Record and press 4.

– The Six-Trak powers up in omni mode which is fine if it’s the only MIDI instrument you are using. If you need to change it to a specific MIDI channel, hold Track Record and press 3 to turn off omni mode. Then press Parameter then 36, then change the value to the MIDI channel of your choice.

The instructions are on the panel as well as it’s easy to forget and saves trawling through the manual every time."