STUDIO ELECTRONICS CODE 8 SN 1314 w/ One Off Custom Serpico-8 Fuzz Control

Note: Auction links are affiliate links for which the site may be compensated.

Never seen the Serpico-8 before. Apparently it was a one off custom extension.

via this auction


"Stuido [sic] Electronics CODE 8 OD Synthesizer

Custom Designed Fuzz Control Breakout Box

Midiminiafy Option Installed
1 TR-303 Filter Installed
1 ARP 2600 Filter Installed
1 CS-80 Filter Installed
Discrete OP Amps Installed

I am the original owner of this custom designed synth. It is in mint condition. I am only selling because I need money to go back to school. What makes this CODE unique is that the guys at studio electronics made a custom breakout box for it and named it the Serpico 8 (Fuzz Control). It is the only one in existence. This box allows you to control the amount of overdrive for each voice individually. You can also turn the overdrive on or off on each voice. With the Midiminiafy option installed, you can choose between Oberheim or Minimoog filters for each voice. There are custom switches on the front panel that allow you to turn on or off Minimoog ADSR envelopes for each voice. With the Minimoog filter and envelope enabled for any or all voices you can sound just like a Minimoog. There are also 1 each of all of the other available filters installed: Roland TR-303, ARP 2600, and Yamaha CS-80. These are installed on the first 3 voices. The discrete op amps on the main output give you better sound. You can use the 8 analog voices for one sound or you can use them in multi-mode. When in multi-mode, this synth can sound like many different synths due to the amount of filters, envelopes, and overdrive controls that are available to you."

CLICK FOR MORE »

Vintage ENSONIQ ESQ-1 Synth Keyboard Wave Synthesizer Version 2 W/ Original Box

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Roland TR-909 v4 Upgrade EPROM Chip with Timing Fix

via this auction. See the seller's other items for more.

"Upgrades your TR-909 to the latest OS
International buyers shall be responsible for all customs, levies or VATS imposed by their country.

Included in this listing:

1 TR-909 v4 EPROM upgrade chip
1 28 pin socket

TR-909 drum machine is not included in this auction, only the 2 items above.

About this upgrade: v4 is the latest TR-909 OS. It fixes MIDI sync problems in previous versions.

To check your 909's OS: power on the unit while holding down the "Track 1" button. One of LED's 1-4 will illuminate, indicating your version # 1-4.

Installation: de-solder the old chip, taking note of the notch on one side of the chip, solder in the new socket and insert the new v4 chip into the socket with notch facing same direction as old one.

If you aren't experienced with eletronics work it is recommended that you have someone who is do it for you.

EPROM and socket will be shipped in an anti-static packaging."

synth upgrades including: Waldorf Pulse Firmware 2.01 EPROM Upgrade, Ensoniq ESQ1 OS 3.50 Latest OS EPROM Firmware, Nord Lead 2 Firmware Upgrade v1.06 EPROM Latest OS, & Ensoniq ESQ1 V3.5HW Hidden Waves EPROMs.

Sequential Circuits Prophet T8 Analog Polyphonic Synthesizer SN 00063

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Pieces that are missing/ not functioning :

5 screws in the back

22 knobs

The original pot on the frequency knob on the Lfo - mod section

The switch on the freq A on the Lfo - mod section doesn't turn on.

Keys:

The first four keys on the lowest octave are warped and stuck together.

53 out 76 keys work

When you plug in a midi keyboard all the keys work great


What works:

The sequencer

The presets have been currently installed

All the keys work via midi

The after touch

All eight voices are working

all of the knobs and switches work except for the frequency A switch on the Lfo mod

The tuning button works


Modifications/ Repairs

painted/ stained all the wood on the sides on the front and in the middle of the keyboard.
painted the top portion of the Prophet black.
replaced two of the Voice chips
replaced the internal battery and I installed all the factory sounds"

CLICK FOR MORE »

Roland SH-5 Monophonic Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Rland SH-5 monophonic synthesizer

Looks 8.75 of 10
Looks better than average but controller panel looks a bit aged. Please see pictures.

Works 10 of 10
Everything works as specified, overhauled before shipping to have long life and to keep original sounds.
Change all electrolytic capacitors and short life transistors, opamps and logis ICs with new ones,
and keys knobs, sliders, switches and jacks cleaning before shipping."

CLICK FOR MORE »

Roland System-100 Model-101 Analog Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Priced to sell due to cosmetic condition!

Located in the USA! No need to hassle with Japan!

This synth has severe cosmetic wear!

Damage includes but is not limited too: chipped paint, rust spots, burnt black key, discoloration of white keys and or case paint, rusty knob caps...

The sound is incredible!

It is 100% fully functional!"

CLICK FOR MORE »

Sequential Circuits Prophet 10 Synthesizer Keyboard SN 0397

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Convolution by mudlogger

Convolution by mudlogger from mudlogger on Vimeo.

"Mannequins Mangrove Oscillator modulated by Just Friends, sequenced by a Monome Grid and Monome Ansible using Meadowphysics, no samples used. Pink noise is filtered with Mannequins Three Sisters providing a random clock. This also uses ER301 new convolution reverb."

Møffenzeef Mødular REVPØL DEMØ

Published on Sep 20, 2017 Møffenzeef Mødular

via Møffenzeef Mødular

"NØ MØRE MAGIC SMØKE!

This cheap and simple little chicklet gøes between yøur mødule and yøur busbøard. In the event øf accidental backwards pøwer, the cømpønents øn this bøard bløw beføre yøur expensive mødule døes! Think øf it like a fusebøx før yøur mødules.

Are yøu using a mødule that døesn't have reverse pølarity prøtectiøn? Maybe the -12v rail isn't labeled? Are yøu wørried abøut a shady pøwer cable that's missing the infamøus red stripe? Unshrøuded header? Maybe yøu're lusting after a DIY prøject but are hesitant tø rack it because it's missing pølarity prøtectiøn...fear nø møre! REVPØL has yøur back!"

CLICK FOR MORE »

ELEKTRON DIGITAKT SAMPLING A SYNTHESIZER ~ Roland System 100 Model 101

Published on Sep 20, 2017 once upon a synth

"Elektron Digitakt sampling demo where I use a single synth as a sound source. I start off by making 4 percussion sounds including a kick, snare, tom, hi-hat and bell. Then I make a bass, lead and pad sound. I then sample these sounds into the 8 tracks on the Digitakt. Finally, I tweak the sounds and make a beat at the end.

The synth used here is the System 100 Model 101 from Roland which is a vintage analog monosynth from the 70s."