Published on Jun 16, 2019 Pete Aleman
The modules are currently for sale by Alemanlabs on Reverb. Note this is the first Alemanlabs post on the site.
"This is a quick demo of two Alemanlabs modules. The two modules are the, "Tap Tempo LFO" by Electric Druid, and the other module is a clone of the 6 stage Phase Shifter from the Roland 100-M modular. Im using one of the LFO's to modulate the Phase Shifer and the other LFO to modulate an SH-1 filter. I am also using an LFO to modulate a VCO.
One of the key features of this LFO is the ability to sync the LFO to a beat. In this example im syncing the LFO's to a trigger out from the Arturia Beat Step Pro."
Alemanlabs Tap Tempo LFO pics and details via this auction
"electricdruid.netReleased under, CC BY-NC-SA 4.0 license
PCB and panel designed by Alemanlabs.
Features
Simple “Tap Tempo” control button.
The TAP TEMPO input can measure the time between two taps of a momentary switch or button, and uses this time to set the LFO’s basic tempo.
Ability to synchronize LFO to external clocks
The TAP TEMPO input can also accept 0-5V pulses. This allows the LFO to be synchronized to an external clock. The module also produces a CLOCK OUT which can synchronize other TAPLFOs.
LFO range from 0.025Hz to above 50Hz
The basic range of the TEMPO CV allows the LFO to produce frequencies between 0.05Hz (a 20 second cycle) and 12.8Hz. However, in conjunction with the MULTIPLIER CV, this range is extended to 0.025Hz (a 40-second cycle) to 50Hz.
Sixteen output waveforms, in two sets. The chip can produce 16 output waveforms. These are selected by the “A/B” switch.
The MULTIPLIER selects a tempo multiplier which is used to determine the final LFO frequency. This allows the LFO to produce changes at double or half-speed, or produce triplet times.
Wave Distort. The selected waveform can be distorted using the DIST pot. This modifies the duty cycle of all LFO waveforms.
Smoothing filter switch. This applies the digital equivalent of a single pole RC filter to the waveform before it is output. The filtering removes the abrupt edges that tend to give clicks in some applications and gives the waveforms a softer rise and fall (about 20msecs).
Built in fuses on the power input protect the module from over current conditions. If the module experiences any kind of over current condition the fuses will over heat protecting the module. The fuses will reset once power is recycled.
The panel is laser cut, drilled and silk screened with epoxy based ink."
Alemanlabs M-172 Phase Shifter pics and details via this auction.
"This is a clone of the M-172 Phase Shifter from the Roland 100M modular synthesizer. It has 6 stages of phase shifting for a super rich warm sound. 100% classic analog. The module is super low profile and skiff ready.
10hp wide
Built in fuses on the power input protect the module from over current conditions. If the module experiences any kind of over current condition the fuses will over heat protecting the module. The fuses will reset once power is recycled.
The panel is laser cut, drilled and silk screened with epoxy based ink.
Patch in an external LFO into the CV1 input to bypass the internal LFO
CV1 pot is modulation intensity."
