Sunday, January 22, 2023
'Sonic X-Voice' - Human Vocal Patch from our Klaus Schulze Tribute video with Sonic XV Eurorack VCF
video upload by AJH Synth Official
"This Patch of The Week shows how the vocal sound was created that featured in the Klaus Schulze tribute video. It uses the Sonic XV Diode Transistor Ladder Filter for both it's band pass filter, and it's built-in wave folder. Patch sheet at the end of video, plus a download link for a PDF version with notes further down the page. Musical Tribute to Klaus Schulze: https://youtu.be/VA-Io4jVKbA
The Sonic XV is a surprisingly flexible multimode VCF - it can do the kind of aggressive, screaming resonance chaos that you'd expect from some of the famous diode filter-wielding synths of the past, but it's also particularly good at softer, delicate sounds, and having a well-featured wave folder on board gives it a much wider scope for tone-shaping. This, coupled with it's fast response, and simultaneous band pass, 6dB and 24dB low pass outputs, makes it a great choice for fast melodic sequences and percussion sounds. It's character is significantly different than that of the Minimoog-based Transistor Ladder Filter, and compliments it nicely, even if only used for it's wave folder to feed other VCF's. Sonic Wave Folder & Sequencer: https://youtu.be/pJUb-ZEddqQ
The AJH SYNTH Eurorack range consists of high-end modules, all hand-made in the UK, most of which are based on classic, vintage designs, authentically recreating the circuitry of much sought-after analogue instruments and technologies of the past, whilst greatly expanding them, and bringing them to modern Eurorack levels of convenience, limitless flexibility, and reliability.
Check out the AJH Synth playlists for module 'User Guides', and 'Patch of The Week' videos, which will be either performances or 'how to' guides, detailing functions/methods, and a range of sounds, some familiar, some less so, containing a patch sheet at the end to show you how to construct it for yourself.
Video by @DreamsOfWires
Patch sheet with notes: https://kvisit.com/8AE/x_8G
Patch notes:
--------------------
Green dots show approximate pot and switch positions. Pots and switches that do not have green dots are not used in this patch, and should be left at their zero or off positions.
DH-ADSR: As we are using the inverted output here, it will constantly be sending a +8V signal to the LIN-CV of the VCO (therefore raising it's frequency/pitch) until it receives a gate signal, at which point it will follow the envelope settings, starting from an output of 0V. This is why the VCO will need re-tuning to match other instruments used, but preferably after you are happy with the amount of envelope to pitch influence you have dialled in. Dual LFO: The Tap Tempo VC-LFO module could also be used here in the same way, as it also has a built-in VCA (level control). Sonic XV: Small differences in wave folder settings can make a big difference to the sound, so it'll probably require some fine-tweaking to get the ideal timbre. I have added some resonance in this version, as it can help to simulate the tone of a human voice, but this is of course subjective - all voices are different. Band pass is definitely the best filter type to use, as it can remove both high and low frequencies that would be beyond those produced by a human voice. Modules used from left to right: DH-ADSR Envelope, Dual LFO + VCA, Vintage Transistor Core VCO, Sonic XV Diode Filter, Contour Generators, Discrete Cascaded VCA."
230122 - Jamuary 2023 - SmplTrek Ether Gaming
video upload by ChrisLody
"So here's an interesting thing to mess around with, sampling electromagnet noise from gaming devices with a Soma Ether and then making a tune with it.
Fairly self explanatory, apart from the fact that I had to mime to bits at the start where I am recording the sounds from various gaming devices. The Soma is super sensitive so it was picking up my lights and camera when I tried to record under them so I actually captured the audio stood in the middle of my studio in the dark.
The recordings were added to the SmplTrek then tuned and looped on the hardware itself. In the case of the DS I used the new auto chop to drum kit feature and then added a decay envelope to each slice, pitched them, panned them etc.
That's about it."
ELKA DRUMMER ONE COMPARISON CHAPTER II
video upload by Vintage Audio Institute Italia
Part 1 here
"Once again we have the unique pleasure and privilege to own two Elka Drummer Ones.
These two units are very close in sound - and sound amazing to our ears.
The snare is powerful and punchy, the kick deep as a river in a valley :)
These machines have a unique internal architecture - they're literally crammed with circuitry compared to similar drum machines of the era.
The secret to its sound is the routing of each drum sounds signal path before being summed by the master volume amp.
We've had quite a few of these units by now and have noticed that they vary in sound and in circuitry.
The circuit boards don't always mount the same components.
The rhythms themselves differ - if you take a look and listen to our first Elka Drummer One Comparison video you can hear that the patterns are different from one unit to the other.
The lower shelf unit is for now sale on our Instagram page and Reverb shop. It's our beloved studio puppy and it needs to go while we're keeping the golden rimmed one because of it being a bit more rare than the silver version.
Watch the end of the video for a quick run through of the machine sitting in the middle, the rhythm box that succeded the Elka Drummer One :
The Elka Rhythm Machine.
Some of the magic is missing here - the sounds are flatter and more generic - not bad at all but definitely not as amazing. The front panel is very similar to the Elka Drummer One - the amount of rhythms correspond except for Afro being added and Rhumba spelled with an H."
Jamming with Yamaha CS-15, Moog Source, and Friends
video upload by Bata
Akai MPC X - Drums
Moog Source - Bass
Yamaha CS-15 - Plucky Sequence
Behringer Pro-1 - Sound Effects
Studio Electronics Boomstar 5089 - Lead
Jamming with Moog Source, Boomstar, and Friends
Akai MPC X
Moog Source
Xoxbox
Behringer 2600
Behringer Pro-1
Studio Electronics Boomstar 5089
Saturday, January 21, 2023
Music for grey days in January - Trumpet w/ eurorack modular synthesizer [Arbhar & Clouds]
video upload by Marble Lighthouse
"Free improvisation.
All sounds are originating from the trumpet, but processed by Arbhar & Clouds"
---
Call and response with the modular.
Arturia Microbrute & Synthstrom Deluge
video upload by Easy Tiger
"Just having fun improvising on the microbrute over a simple chord progression played by the deluge. Delay and reverb for the microbrute is also coming from the deluge.
The microbrute is special to me because it was the first synth I owned. Even though I don't use it as much anymore I still love it for its hands-on control and I think it sounds fantastic!"
Olegtron 4060E
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Click the Olegtron label at the bottom of this post for additional posts with demos.
via this auction
Click the Olegtron label at the bottom of this post for additional posts with demos.
Waddingtons Compute-a-Tune w/ Original Box
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
You can find a couple of demos previously posted here.
"1978 (I think) Waddingtons Compute-a-Tune Analog Synthesizer with Programmable 32-Note Sequencer. Made in the UK (Leeds). With original box and instructions.
Battery powered (nearly new batteries included). Line out and built in speaker. Volume knob is disabled for line out. It has a fixed volume. Check out the various videos on You Tube to see what this does.
Distinctive sound and 2 octave membrane keyboard. Black and white notes!
Condition is good overall. There are some marks to the plastic surface, but no major damage. The keys work and other membrane buttons work pretty well. I'm sure as well as they ever did ;) The sponge in the battery compartment had worn away, so I cleaned the last bits of it off. Doesn't effect use. The name plate below the speaker is a little bent (it's thin tin or something and not a sticker). Box is in pretty good condition with original polystyrene. Some rips here and there.
The switches on top are quite stiff, but all working. I bought this for a one-off project and much fun, though it is, space and money require this sale."
via this auction
You can find a couple of demos previously posted here.
"1978 (I think) Waddingtons Compute-a-Tune Analog Synthesizer with Programmable 32-Note Sequencer. Made in the UK (Leeds). With original box and instructions.
Battery powered (nearly new batteries included). Line out and built in speaker. Volume knob is disabled for line out. It has a fixed volume. Check out the various videos on You Tube to see what this does.
Distinctive sound and 2 octave membrane keyboard. Black and white notes!
Condition is good overall. There are some marks to the plastic surface, but no major damage. The keys work and other membrane buttons work pretty well. I'm sure as well as they ever did ;) The sponge in the battery compartment had worn away, so I cleaned the last bits of it off. Doesn't effect use. The name plate below the speaker is a little bent (it's thin tin or something and not a sticker). Box is in pretty good condition with original polystyrene. Some rips here and there.
The switches on top are quite stiff, but all working. I bought this for a one-off project and much fun, though it is, space and money require this sale."
Davoli Davolisint
MOOG OPUS 3
via this auction
"Have you been searching for a very rare classic/vintage synthesizer? Well; here it is! One of the MOST BEAUTIFUL synthesizers ever built... Any angel you look at it, it is BREATH-TAKING; and screams late 70's...
What makes this gem extra unique and special, is the condition that is in! It has been well preserved, and is in MINT CONDITION! This wonder is adored by all collectors, and will keep on going up in value...
Needless to say, being in this condition, everything works perfectly as it was, when it rolled off the factory.
My wife inherited this from her grandfather. He was a very neat person, and a collector. So, it has been pampered all its life, barely played with, and mostly tucked away securely in the closet with the rest of the collectables (that we might make available for sale soon! Stay tuned...). I truly enjoy, and adore this magnificent synth, and really wish I could keep it, but the decision is not mine to make...
I am sure that if you are looking at this item, you know enough about it. But you can always Google it, and read all you need.
It is truly hard for us to part with it, and we hope this unique and rare beauty finds a good home, and stays in this condition, so one day, it may end up in a museum..."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH



























