Groc Update: New Hardware Revision

video upload by oddment audio

"We are in process of finalizing the Groc circuit board and getting some units up and running for beta testing. In this video we show the hardware we have developed and worked with over the last two years and demo the new time-frequency visualization."

An Introduction to the Polyend Synth

video upload by Polyend

Yamaha Pss A50 synth in action

video upload by Blossom Bisquits

#yamaharefacecp #hologramelectronics #refacecp
#yamaharefacecp #hologramelectronics #refacecp #yamahapiano #rhodes #digitalpiano #ambientmusic #darkambientmusic #generationloss #hologramelectronics #rhodes

Microfreak jam with Demedash t120 and Chase Bliss Generation Loss Mk2 ECHORD SK37 Minikeyboard White

video upload by Blossom Bisquits

"#microfreak #radiohead #videotepe #generationlossmk2 #casebliss #ECHORDSK37 Minikeyboard White"

Joystick sampling? #stazma #synth #eurorack

video upload by Stazma

intellijel Planar 2

Make Noise Shared System + QMMG

video upload by Akihiko Matsumoto

"Make Noise Modular Synth (Sample Pack) https://akihikomatsumoto.bandcamp.com..."

Cosmotronic Aphelion - Stereo distortion and filter - demo

video upload by Cosmotronic

"Demo of the Aphelion stereo distortion
Samples by Samplesound, Bries, Cosmotronic
Second demo by Wiilx

About Aphelion ( 8HP)
Aphelion packs a stereo distortion and low/high pass filter into a compact 8HP design.
It features three unique stereo distortions in parallel with a continuous crossfade between them, controlled with the character knob or a cv input.

The first circuit is an overdrive that adds a lot of warmth and fattens up the sound without becoming too harsh. The second one is a saturating wavefolder, that can add interesting extra harmonics depending on the waveform of the material. The last distortion is inspired by the classic RAT guitar pedal. It adds an aggressive feel and grit to the sound..

A mix knob lets you blend the dry input signal with the distorted signal, before it hits the filter. Setting it fully dry bypasses the distortion effect.

If you need even more dirt, there's a handy +12dB gain switch, to really overdrive the circuits. If you want to keep your low-end undistorted, you can switch on the Low-cut filter.
The non resonant stereo filter combines a low pass and high pass stage, and uses an IC based on the classic SSM2040.

This filter is also overdriven, adding some warm distortion and extra harmonics to the original signal, and limiting the output level.
The cutoff knob becomes a a low pass filter when turned counter clockwise, and a high pass filter when turned clockwise. It's possible to control the low and high pass filter cores independently as well using CV.

The filter bypass switch can be used for instant reintroduction of all frequencies into the mix upon release—a great tool for live performers. Lastly the level knob attenuates the output volume.

Power:
+12v - 90mA
-12v 80mA
MSRP 270 euro"

Filter Friday: Roland CR68 and Mutron III

video upload by foleytronics fx repair

"Every day is filter Friday here!"

Making Pinged Kick Drums with Toppobrillo Multifilter 2

video upload by Travis Kennedy

"*HEADPHONES OR HIGH QUALITY SPEAKERS RECOMMENDED*

How to patch a kick drum with the Toppobrillo Multifilter 2:

1. Patch a gate or trigger to the Ping input of the filter. You can monitor any output but I use the Variable mode output.

2. Set the resonance to at least 12 o’clock but no higher than 3 o’clock. More resonance = more sustain

3. Set the frequency below 10 o’clock or to taste.

4. Patch either the low pass, band pass, or high pass outputs to the Mode CV input. Attenuvert to taste. This can add some phase modulation and increases harmonics.

5. Send a decay envelope to the FM input. Attenuate to taste.

6. Ignore the filter inputs and gain knob.

Notes:
Envelope generated from a Toppobrillo Sport Modulator 2 with a linear shape.
I prefer taking the output from the Variable output because of the additional tone shaping available, but you can use any output for this patch. It can also be fun to experiment with using multiple outputs and processing them differently."

create a track in 50 seconds with OP–XY

video upload by teenage engineering

"OP–XY is a powerful sequencer, synthesizer, and sampler. stack sounds on a 64-step grid, and create thousands of projects. tactile 24-key keyboard and a multi-out jack that lets you select one of four outputs. 8 unique synth engines, two send effect slots, plus brain™ for transposition—it’s a complete studio in the palm of your hand."