Monday, March 03, 2025
Tiny LD and Eurorack
video upload by gotharman
"Tiny LD getting modulated by eurorack via the USB CV expander prototype :)"
www.gotharman.dk
HYP3 Core Engine 開発 - Roland TB-303との比較テストの記録
video upload by SYNTHERNET
Googlish translation below.
"これは2024年6月に行ったHYP3 Core Engine (仮称) というアナログモデリング音源とRoland TB-303との比較テストの記録です。 HYP3 Core Engine (仮称) はSYNTHERNETで開発中のハードウェアシンセサイザー、HYP3やG3N3などで使用するモデリング音源です。 動画で使用しているMICRO HYP3は、実験用のハードウェアです。オーバークロックされたSTM32F411 (Cortex-M4, 120MHz) で動作しています。
左上の表示はas_SonoGx2というスペクトログラフを使用しています。 横軸が時間で縦軸が周波数です。レゾナントピークが輝線として見えるため、カットオフ周波数のエンベロープ形状を観察することができます。オレンジ (HYP3) とブルー (TB-303) が重なると白く表示されます。
テスト1ではテンポ上昇とアクセントの連続に追従してエンベロープが上昇していく状態を比較しています。オシレーターがフリーランニングなので位相差のずれは起こりますが、エンベロープ自体はほとんど一致しています。
テスト2ではパラメータを変化させた時の変化を比較しています。HYP3 Core Engineはポテンショメータのカーブやパラメータ範囲までTB-303に一致させています。これは個体に合わせて調整することも可能です。
テスト3では同じ外部のディストーションをかけた時の比較です。歪ませたとしても、かなり近いフィーリングを得ることができます。"
Googlish:
This is a record of a comparison test conducted in June 2024 between the analog modeling sound source called HYP3 Core Engine (tentative name) and the Roland TB-303.
The HYP3 Core Engine (tentative name) is a modeling sound source used in hardware synthesizers under development at SYNTHERNET, such as HYP3 and G3N3.
The MICRO HYP3 used in the video is experimental hardware. It runs on an overclocked STM32F411 (Cortex-M4, 120MHz).
The display in the upper left uses a spectrograph called as_SonoGx2.
The horizontal axis is time and the vertical axis is frequency. The resonant peak appears as a bright line, so you can observe the envelope shape of the cutoff frequency. Orange (HYP3) and Blue (TB-303) When they overlap, they are displayed in white.
In test 1, we compare the state in which the envelope rises in response to an increase in tempo and a series of accents. Since the oscillator is free running, there is a phase difference, but the envelope itself is almost identical.
In test 2, we compare the changes when parameters are changed. The HYP3 Core Engine matches the potentiometer curve and parameter range to the TB-303. This can also be adjusted to suit the individual unit.
In test 3, we compare the results when the same external distortion is applied. Even with distortion, you can get a very similar feeling.
Acid 303 sound with Synthesizers.com
video upload by Omri Cohen
"You can find this patch, along with many others, available on my Patreon page - / 123073885"
00:00 - Introduction
00:19 - Main setup
07:47 - Kick
10:37 - Hats
Waldorf STVC #synth #synthesizer #synthwave #vocoder #strings #sounddesign #soundscapes
video upload by Kraft Music
"Great bundle deals on Waldorf STVC here: https://kraftmusic.com/collections/st..."
Chimera BC6 SN *5C1Q7K*
EMS VCS3 II SN 1282
Yamaha CS-50 synth front plate platte
Moog/Cordovox CDX-0652 "White Elephant"
Note: Auction links are affiliate links for which the site may be compensated.
via this listing
"Produced by the Thomas Organ Company in the mid to late 70s for Moog, it was basically their Cordovox Organ with a Moog Satellite synthesizer built in to it. Nicknamed 'The White Elephant' for its massive size and round shell. Looks like something from a Stanley Kubrick movie, I've kept mine in my living/dining room and it's a constant conversation piece and fun to play with friends. Recording wise the sounds are top notch. The thin metal plate which is along the top row of synth switches is bent slighly and could benefit from being removed and bent back to shape, but it's only attached by a couple of screws. Otherwise some scrapes and marks on the white tolex normal for it's age."
via this listing
"Produced by the Thomas Organ Company in the mid to late 70s for Moog, it was basically their Cordovox Organ with a Moog Satellite synthesizer built in to it. Nicknamed 'The White Elephant' for its massive size and round shell. Looks like something from a Stanley Kubrick movie, I've kept mine in my living/dining room and it's a constant conversation piece and fun to play with friends. Recording wise the sounds are top notch. The thin metal plate which is along the top row of synth switches is bent slighly and could benefit from being removed and bent back to shape, but it's only attached by a couple of screws. Otherwise some scrapes and marks on the white tolex normal for it's age."
Arpeggio Improvisational Jam with the Sequencer Overlay
video upload by Tangible Instruments
"The Sequencer Overlay lets you dive deeper into your saved sequences and change the pitch or octave of any note, add slide notes where you want, adjust swing, and note probability. In the beginning of the video I'm adjusting the 'Sequence Frequency Pattern' which is like a step sequencer for the entire sequence. Sometimes you don’t want a melody to play constantly in order to leave space for the other instruments in your composition. A Sequence Frequency Pattern of up to 16 steps is saved with each sequence. Each step can either play the sequence or wait silently for the length of the sequence. Later, I'm using live note input to change notes in the sequence as it's playing. @KorgOfficial @jhspedals"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
