MATRIXSYNTH

Rhythms of Everyday Sounds and Kalimba : Intrusion 2025-09-08 by atnr

video upload by atnr

"A piece created with ‪@teenageengineering‬ EP-133 K.O.II, OP-1 field, kalimba, and ‪@SequentialLLC‬ Prophet-10. Electronica built from rhythms made by sampling percussion and everyday sounds, layered with kalimba and synthesizers.

On the EP-133 K.O.II, I sampled the sound of a children’s drum and other objects around the room to construct the rhythm. Using Punch-in FX, I added further processing with the ‪@ChaseBlissAudio‬ MOOD MKII, applying SLIP, pitch shifting, and micro-loop effects.

The OP-1 field is synced to the EP-133 via USB, looping a 16-bar synth harmony while also performing melodies.

The kalimba is recorded with an NT-4 microphone.

On the Prophet-10, I adjust the filter cutoff while playing. Its output runs through the ‪@BOSSinfoglobal‬ DD-6 for delay and is further processed with ‪@ChaseBlissAudio‬ LOSSY for reverb and lo-fi effects."

CROSSOVER EURORACK MODULE | ADDAC System - ADDAC607

video upload by DANIELE

"This is ADDAC607 by ADDAC System, a mono 3 band Crossover featuring 4 pole, 12db Sallen-Key active filters and volume controls for each band!"

0:00 Intro
0:17 Inputs
0:32 Mono sum out and gain controls
1:02 Low range band
1:22 High range band
1:48 Mid range band
2:40 Equalization
3:38 Pairing it with an envelope follower

"Commonly audio Crossovers split an audio signal into several frequency ranges so that each resulting signal is adequate for the speaker drivers they are connected to, usually low range is sent to the big woofers, mid range to smaller woofers and high range to the tweeters.

Here we introduce our ADDAC607,a mono 3 band Crossover featuring 4 pole, 12db Sallen-Key active filters and volume controls for each band. Although ADDAC607 operates in Mono (for Stereo signals two modules can be used) there are 2 audio inputs that allow an easy way for Stereo to Mono summing. The [MONO SUM OUT] carries this summed signal. This output is pre-gain and can also be use as a buffered Thru output.

The possibility to split the signal into different bands makes possible several usefull processes, as examples:
- Independently process specific frequency ranges like adding delay only on the high range band
- Split a signal to feed 3 compressors for multiple band compression
- By controlling the [GAIN] knobs they can act as “kill” switches in DJ mixers to remove a whole band from the mix

This module is also a great companion for our ADDAC220 Dual Envelope Follower+ allowing to extract the dynamics from any signal in a focused frequency range allowing to, as an example, separate a kick drum from a snare.

There are three switches to select the bands operating ranges:
2KHz, 4KHz and 8KHz for the high range
370Hz, 620Hz and 1KHz for the low range

The three [GAIN] controls set the volume for each band. At noon they are unity gain, fully CW they are x2 amplifiers."

Check with dealers on the right for availability.

Ocean Swift - Spectral Oscillators Toolkit Vol2

video upload by Ocean Swift / Faxi Nadu

".+519 perfectly looping mix-ready oscillator sources
.Sculpt lush, evolving motion or beautifully unstable oscillator waves rich with character.

Grab here: https://oceanswift.net/product/spectr...

Spectral Oscillators Toolkit Vol 2 expands the spectrum with a fresh set of meticulously crafted seamless oscillator samples: pure waveforms, harmonically tuned tones, gently drifting textures, atmospheric drones, and tonal beds. Built from varied synthesis methods, our in-house preset work, and hardware sessions, it balances clarity and character - equally at home as a pristine foundation or a subtly unstable layer.

This volume is organized for speed. More robust naming and thoughtful curation make it easier to scan by feel and function, so you can audition, shortlist, and build faster without breaking your flow.

Design evolving ambiences, cinematic beds, or roll your own instrument oscillators - each file is ready to drop into samplers, sample-based oscillators, granular engines, or modular systems. Treat every loop as a reliable tuned “oscillator” you can explore, evolve, stack, and process. Stands on its own and pairs beautifully with Vol 1 for an even broader palette, and synergises instantly with our Porphyra Hybrid and Dystopia Diary instruments.

Contents:
519 Oscillator style samples
WAV format (16-bit, 44.1kHz)
Perfectly looping sound sources - Sampled at C3 (Note 48)
Compatible with a large variety of hardware synths, Eurorack and other modular systems, software synths, DAW's, audio tools and more (See the compatibility list for more information)
Long evolving samples
4.33GB total

Looping oscillators designed for:
Granular Engines
Sample based synthesis
Synths with sample oscillators
Ambient and cinematic layering"

VCV Rack - New Modules \ September 2025

video upload by Omri Cohen

Introduction - 00:00
trig/stepStation - 00:12
rMod - 04:29
CV Funk - 09:01
Knot - 12:39
Misc - 14:37

"You can find these patches, along with many others, available on my Patreon page - / 138107419"

Bob Moog Foundation Fundraising Raffle For Vintage Minimoog Signed by Todd Rundgren

video upload by moogfoundation

"Purchase raffle tickets here: https://bit.ly/ToddRundgrenMinimoogRa...

The Bob Moog Foundation is excited to announce its latest fundraising raffle featuring a fully restored vintage Minimoog Model D synthesizer signed by the legendary Todd Rundgren (Utopia). Originally manufactured in Moog Music’s Williamsville, NY factory in the early 1970s, the Minimoog (serial number 4605) was restored by current Moog Music engineer Tim Johnston.

Rundgren signed the Minimoog while also inscribing 'Moog = Synthesizer' on the back of the synth. The Minimoog is valued at $6,500. The raffle is open internationally."

Groove Synthesis 3rd Wave 8M Review & Demo | Compact Synth Powerhouse

video upload by Starsky Carr

0:00 All 3rd Wave intro (not drums or vocals!)
2:13 Doing that PPG Thing
4:07 It's SOOOO much more than a PPG
6:33 Creating the Different Styles of Tones
14:00 Putting Them All Together
16:15 Demo Track - Rain or Shine

"The Groove Synthesis 3rd Wave 8M is here – the compact desktop module with huge power. From classic PPG tones to modern wavetable magic, this demo shows why it could be your next dream synth.

In this video I put it through its paces with a full demo and review, showing how it stacks up against the bigger 3rd Wave keyboard and even the Behringer Wave – a clone of the classic PPG 2.2.

With 24 voices, wavetable creation, sample import, and a deep sequencer, the 8M delivers the lush PPG tones we know and love – but it also goes far beyond, opening up new creative possibilities for sound design and performance.

If you’ve seen my earlier videos on the 3rd Wave , you’ll know how close they get to that classic PPG sound. But the 8M adds serious flexibility: multi-timbrality, modern workflow, and the ability to create wavetables from audio. This isn’t just a clone – it’s a synth that pushes forward while staying true to the heritage.

Whether you’re a fan of vintage digital synths, wavetable synthesis, or just looking for an inspiring new instrument for your studio, the 8M is a fascinating option.

👉 Check out my 3rd Wave Playlist - everything you could ever want to know!"

Waldorf Iridium / Quantum - "Cinematic Landscapes" Soundset (51 Exclusive Performances)

video upload by LFOstore

"'Cinematic Landscapes': Paint with Sound. Tell Stories Without Words.
Immerse yourself in a world of evolving emotion and vast auditory vistas with "Cinematic Landscapes"—a meticulously crafted collection of 51 sample-based presets for the Waldorf Iridium & Quantum. This is more than a soundset; it's a palette of moods and textures designed for composers and sound designers who speak the language of feeling. From haunting, barren drones to hopeful, shimmering atmospheres, "Cinematic Landscapes" leverages the full power of Waldorf's flagship synthesizers to deliver an unparalleled toolkit for scoring and ambient production!

This signature soundset is created by OttO K. Schwarz and Nick Klimenko, LFO Store co-founders and renowned sound designers collaborated with Access Music, Modal Electronics, Native Instruments and other market leaders. In this soundset you will find evolving pads, atmospheric drones and soundscapes - deep, morphing textures that breathe and tell a story over time.

All presets are modulation wheel - assigned. The soundset is perfect for ambient, new age & cinematic music producers, film scoring and soulful media production. «Cinematic Landscapes» doesn't just give you a sound—it gives you a scene. A mood. A moment in time. Let it be the foundation of your next narrative!

Please find the product with more detailed description here: https://ottolfo.sellfy.store/waldorf"