Facehugger Root function

video upload by flightofharmony

"Demonstration of the Root function.
Facehugger project is live on Kickstarter until Saturday, April 22, 2023! https://www.kickstarter.com/projects/..."

Facehugger Internal Ramp Curve function

video upload by flightofharmony

"Demonstration of the Curve function.
Curve controls the slope of the internal drive Ramp signal, from a linear ramp to either an exponential or logarithmic curve, which changes the spacing between stages.
Facehugger project is live on Kickstarter until Saturday, April 22, 2023! https://www.kickstarter.com/projects/..."

Facehugger Trigger function

video upload by flightofharmony

"Demonstration of the Trigger function.

Facehugger project is live on Kickstarter until Saturday, April 22, 2023! https://www.kickstarter.com/projects/..."

New flight of harmony Parasite Antifilter & Famine Eurorack Modules

video upload by flightofharmony

Overview video followed by demos. The following is the description for the overview:

"A slow walkthrough of Parasite dynamics, showing off the quirks and extreme variability.

Very simple patching (sometimes none), and just showing the more unstable end of usage: Out 2, high Feedback, etc.

It is interesting to note that the Parasite Antifilter acts like a capacitor sometimes and stores energy. Many of the sounds it generates have a charging period before they show and then run on their own like an additional source. They'll keep running until the settings are changed, and have to re-charge before they appear again.

I was going to edit this, but we left it complete to show everything, even the dead zones.

Sources: Desktop Infernal Noise Machine for tone and LFO, IMP for other.

Notable points:

04:10
04:30
06:48
9:44
10:50
12:25
13:09 - Shows the development of various tones and rhythms over the next minute or so.
15:54 through17:15 - long-cycle rhythmic evolution & sporadic distortion."

What is the Parasite Antifilter?
Well, it started out as a VC parametric equalizer, but it sucked. Really bad. I decided to trash the idea and sent the original prototype to the Great Wizard for them to play with since we had been chatting about it. The subsequent findings were completely the opposite of what I found – not about the filter part though, that still sucked. It turns out the Parasite Antifilter is a ridiculously fun and useful drone source, drum generator (especially kicks, snares, and blocks), distortion and fuzz, absolute sonic wreckage device, coloring mixer, formant generator, and so on. We keep finding more uses for it each time it’s fired up.

Ostensibly, the Parasite Antifilter is a 2nd-order cascaded parametric equalizer. Out1 is from the first stage, Out2 is from the second stage. Both can be used simultaneously for a stereo-esque signal. The Feedback knob controls amount of output fed back to the input, and the Feedback toggle chooses if it’s from Out1 or Out2.

The 'Infest' switches are wholly serendipitous and defy explanation. Just know that they are there for good reason, which is readily apparent when you use them. Infest 1 affects the first stage, Infest 2 the second.



"Welcome to Flight's Famine Fun - IMP Edition!

Having used Famine to turn two sound effect modules into sound sources, it was time to see what new possibilities could be found by using Famine on a source module - the INM IMP.

This video is goes into more detail and exploration to show how much is hidden away inside a module that just takes a little torture and suffering to bring out. Come watch!

As with the others, this is the raw audio, with no processing."

What is Famine?
Famine is a voltage-controlled power starvation module, a teasing taste of electronic death – with the ever-present threat of the real thing. Your system will squeal, stutter, fuzz, and shriek, in new ways as you torture it while discovering the sublime joys of Schadenfreude.

Famine is capable of handling 1.5A, enough for an entire busboard of modules.

All/Split:
• In the All position, positive and negative rails track together using the All/+V knob and CV input and the -V knob and CV input are ignored.
• In the Split position, positive and negative are separated and controlled from their respective knob and CV input.

Crush/Wrack:
• In the Crush position, positive and negative mirror each other, i.e., +5V & -5V, +6V & -6V.
• In the Wrack position, positive and negative track inversely, i.e., 0v & -10V, +1V & -9V, +8V & -2V, etc.

Starve/Feed:
Starve position to starve, Feed position to bypass circuit entirely.

L.E.D.s
The LEDs indicate the level of starvation and glow brightest at 0V output.

Notes:

• Most effective on analog systems. Since digital is based on the principle of either on or off, there’s not much to play with there. Systems with bootup periods are particularly annoying.
• NO RELAYS, GAUGES, MOTORS, FANS, OR OTHER INDUCTIVE SYSTEMS (see below).

Disclaimer:
Famine may destroy your system. Although commonly used, voltage starvation is a largely unstudied technique and the dangers it poses are not well known or understood, but are rumored to range from general malfunction to actual fire and catastrophic failure. Any use of this module is entirely at your own risk.

NOT RECOMMENDED with inductive or electromechanical systems. Inductive kickback has been known to be a danger to circuitry in AC power distribution systems. The currents in Eurorack are highly unlikely to cause damage, but it is a non-zero possibility.

Details, samples, updates, and discussion can be found in the Famine thread on ModWiggler.com.

https://flightofharmony.com

Pre-orders available at: https://flightofharmony.com/contact/

INFERNAL NOISE MACHINE Eurorack "Demo" ... oh well #TTNM

video upload by THE TUESDAY NIGHT MACHINES

"I had to partly de-monetise this video due to excessive swearing.
Flight of Harmony's Infernal Noise Machine Eurorack modular synth module (INM-E) is a complex synth voice with a focus on dark and deathly noise sounds and ... uhm ... well ... p***ing its users off.

Timecodes:
0:00 WTF?!
1:48 WHOAH!
2:18 There's a printed manual and I'm p***ed.
3:24 Introduction
6:43 Basic Features
12:16 The IMP Noise Core
17:35 Joystick Width Control
21:10 Patching the INM-E
27:29 External Sequencing
30:10 KTHXBYE!

Official website:
https://flightofharmony.com/product-l..."

THE TUESDAY NIGHT MACHINES:
https://nightmachines.bandcamp.com
https://nightmachines.tv

New Flight of Harmony INM-D Infernal Noise Machine V2 Desktop

via flight of harmony, available for pre-order. Details follow:

Pricing (USD):

Blood Box road case: $2,740.00
-Material: Black Walnut (see note), stained, nickel-plated hardware.
-Dimensions: 20″W x 10″H x 7″D (closed)
-Weight: ~13lbs.

Minimal case: $2,490.00 (No hardware or stain, just four feet and a protective top coat.)
-Material: Black Walnut (see note)
-Dimensions: 20″W x 9″H x 4.5″D
-Weight: ~10lbs.

*Note: Case sides are solid black walnut. Top & bottom are Black walnut plywood for dimensional stability (so the box won't split due to temperature or humidity fluctuation).

Both include a US AC adapter (12VAC 1500mA, 5.5mm x 2.1mm). For international orders, deduct $20 from the price and I will locate a compatible adapter in or near your country that you can order, if needed. Blood Box also includes the related tiedowns, anti-vibration pad, and leather strap.

CLICK FOR MORE »

Rocky Flowing by Infradead (Infernal Noise Machine demonstration)

flightofharmony

"Infradead of the Tacoma Noise Rodeo submitted another great INM-E demo track.
'INM is processing the drums. One channels filter is being audio modulated by drums the other by the osc.'

The Infernal Noise Machine Kickstarter campaign is almost over! https://www.kickstarter.com/projects/...

Remember: this was just a tryout of the Kickstarter platform. Development of the INM-E has been in progress the whole time and is now finalized, so these are being built whether or not the campaign succeeds. All pledges will be converted to preorders if the goal is not reached, so this is your chance to get one of the 22 remaining Limited Edition units!"

FoH Infernal Noise Machine vs Landscape fm Stereofield, by Infradead

flightofharmony

"Great improv noise session from Infradead of the Tacoma Noise Rodeo!

Come check out the INM-E Kickstarter campaign! https://www.kickstarter.com/projects/..."

flightofharmony INM E Simple Self-Patch Demos #2 & #3

flightofharmony

"Another four-cable self-patch example of the eurorack Infernal Noise Machine. This one starts in a higher range like static or white noise. The second half shows how the INM is made of "sweet spots", where small control changes greatly alter the sound. The INM-E is on my workbench in a circuit board holder.

This video was recorded while I was still trying to figure out the best recording settings in OBS and the motion is a bit choppy, but the sound is in sync and accurate.

Come check out the INM-E Kickstarter campaign! https://www.kickstarter.com/projects/...

(Module shown is a prototype.)"


Infernal Noise Machine Simple Self-Patch Demo #3


flightofharmony

"A two-cable self-patch example of the eurorack Infernal Noise Machine. This patch creates a pseudo-delay/reverb effect that is very apparent on headphones. Two more cables are added later for AR envelope

Come check out the INM-E Kickstarter campaign! https://www.kickstarter.com/projects/...

(Module shown is a prototype.)"

Additional posts here

Infernal Noise Machine Simple Self-Patch Demo #1

flightofharmony

"A quick demonstration of what can be done with four patch cords and no external modules. The INM-E is on my workbench in a circuit board holder.

Come check out the INM-E Kickstarter campaign! https://www.kickstarter.com/projects/...

(Module shown is a prototype.)"

Infernal Noise Machine, Eurorack Version. Full Demo and Patch explanation.

flightofharmony

"In this video, we demonstrate a song made using the INM-E and show how the patches were made for each component. All audio is generated by the INM-E, using various other modules to control the parameters.

Our eternal gratitude to Erik Tinberg for creating this video."

flightofharmony RAISE HELL T

via @flightofharmony

"This shirt will only be available to those who join us in summoning the Infernal Noise Machine module into existence."

flightofharmony Infernal Noise Machine (INM-E)

Eurorack Infernal Noise Machine Demo Preview Render1 - flightofharmony

"An early, very incomplete, stage in making a demo video for the upcoming eurorack Infernal Noise Machine (INM-E). The final video will explain the patches and procedure."

Also:

"A WIP demo video of part of a song made with the upcoming eurorack Infernal Noise Machine. Final video will explain the patches used for the song. We're working on a Kickstarter to fund production and should have more news next week."

Upcoming Eurorack Infernal Noise Machine - INM-E LFO test

flightofharmony

"Testing the LFO in the upcoming eurorack Infernal Noise Machine. Self-patching only, no external devices used.
The audio track de-synched a bit and I corrected it as best as I could. I'm still figuring out how to record with my new setup... much frustration, yes."

Flight of Harmony Sound of Shadows Kit Prototype Demo

Published on Nov 1, 2019 flightofharmony

Sound of Shadows

"While testing a final prototype of the upcoming Sound of Shadows eurorack module Kit I found some really good examples of what the SoS can do, so I grabbed my phone and recorded a few minutes.

Connections:
Input is a ±5Vp-p (ish) triangle wave from my ancient Function Generator. The frequency is swept by the FG's internal ramp oscillator.
Output goes directly to studio monitors.
The blue CV input cable is from the aforementioned ramp oscillator in the FG.
Audio and video captured by my ancient Samsung Note 3.
No other equipment involved.

Apologies for the shaky video and general haphazardness, this was spur-of-the-moment.

The SoS is *not* a clean delay; that's not the point. : )"

Synthi In Euro (2013)

Published on Oct 11, 2016 VoltageCtrlRtv

"Synthi in Euro Patch:
Choices Y Out to Wiard Anti-OSC 1v. Oct In
Choices X Out to Wiard OSC EXP In, set attenuator to 12 O' Clock
Mult Choices X Out to Wiard 1v. Oct In
Wiard OSC Square 2 Out to Maths Ch. 4 signal In
Quantum Rainbow Pink noise Out to Anti-OSC EXP In Attenuator set to 1 O' clock
Maths Ch. 4 Signal Out (bottom) to ModDemix CV In 1.
Anti- OSC Triangle to ModDemix Signal In 1 Attenuator full CW
ModDemix Out to main mixer out ch.1
Maths Ch. 4 Out (top) to Positronic Transient Gate In A
PTG Out B- to Maths ch.4 rise in
PTG Out A- to Z2040 FM in
ModDemix Out 2 to PTG in B Attenuator at full CW
PTG Out B + to Z2040 Resonance In
Anti-OSC Mayhem out to Z2040 in
adjust Z2040 Frequency to taste
Z2040 to main mixer out ch. 2
Use Choices joystick to control the patch.
With a sprinkle of spring reverb.
The Steady State Fate Positronic Transient played a major role in this patch by FMing the filter and cving the resonance of the z2040.
Visit: steadystatefate.com for more info on the Positronic transient Gate module and Quantum Rainbow.
Links to other module manufacturers that were used in this patch:
makenoisemusic.com
tiptopaudio.com
malekkoheavyindustry.com
flightofharmony.com"

Synthi In Euro

Synthi In Euro from VoltageCtrlR on Vimeo.

Synthi in Euro Patch:

Choices Y Out to Wiard Anti-OSC 1v. Oct In
Choices X Out to Wiard OSC EXP In, set attenuator to 12 O' Clock
Mult Choices X Out to Wiard 1v. Oct In
Wiard OSC Square 2 Out to Maths Ch. 4 signal In
Quantum Rainbow Pink noise Out to Anti-OSC EXP In Attenuator set to 1 O' clock
Maths Ch. 4 Signal Out (bottom) to ModDemix CV In 1.
Anti- OSC Triangle to ModDemix Signal In 1 Attenuator full CW
ModDemix Out to main mixer out ch.1
Maths Ch. 4 Out (top) to Positronic Transient Gate In A
PTG Out B- to Maths ch.4 rise in
PTG Out A- to Z2040 FM in
ModDemix Out 2 to PTG in B Attenuator at full CW
PTG Out B + to Z2040 Resonance In
Anti-OSC Mayhem out to Z2040 in
adjust Z2040 Frequency to taste
Z2040 to main mixer out ch. 2

Use Choices joystick to control the patch.
With a sprinkle of spring reverb.

The Steady State Fate Positronic Transient played a major role in this patch by FMing the filter and cving the resonance of the z2040.

Visit: http://www.steadystatefate.com for more info on the Positronic transient Gate module and Quantum Rainbow.

Links to other module manufacturers that were used in this patch:
http://makenoisemusic.com
http://www.tiptopaudio.com
http://malekkoheavyindustry.com
http://www.flightofharmony.com

via Shiro Fujioka on The MATRIXSYNTH Lounge

f(h) Infernal Noise Machine Sale

"Starting production of the pre-ordered QPBs, so let’s have a good sale for the INM as well! (yeah, still need some cash)

This week only, a limited number of the Infernal Noise Machine in walnut housing are on sale for only $499.00 + S&H (list of $777.00)

Please send inquiries to flight@flightofharmony.com"

Creative uses for FoH V'Amp

YouTube Uploaded by joel1088 on Dec 30, 2011

PLEASE READ: The behavior described is actually by design. According to flightofharmony: "Mod2 and Envelope go to the same place. Mod2 is an envelope input with an attenuator, while the Envelope input is un-attenuated. It’s not bleedthrough, plugging the LFO into the Mod2 means he is modulating his gate signal on the Envelope input. Adding the Gate to the LFO signal is increasing the cutoff threshold."

YouTube Description:

"Modular tip video, how to get rid of bleed when using amplitude modulation on the V'Amp.

Pre-order my upcoming EP for only $5 on Kickstarter now!
http://kck.st/tHKsKO"

flight of harmony Infernal Noise Machine Pics on Aliens Project

more pics here http://www.flightofharmony.com/