MATRIXSYNTH

VINTAGE 1978 MATTEL BEE GEES RHYTHM MACHINE SYNTHESIZER

via this auction

"INCLUDES ORIGINAL BOX, STYROFOAM PACKING, AND INSTRUCTION/MUSIC BOOK USES ONE 9V BATTERY, INCLUDED VERY NICE PHYSICAL SHAPE IT HAS A VERY TINY SPEAKER, SO IT IS NOT LOUD I PLUGGED IT INTO MY STEREO USING THE HEADPHONE PLUG WORKS FINE, THE SECOND KEY FROM THE RIGHT IS TOUCHY, SOMETIMES IT NEEDS TO BE PRESSED TWICE"

CLICK FOR MORE »

korg monotron usb power mod

YouTube Uploaded by FSK1138 on Aug 27, 2011

"powering the korg montron via usb can be done with a simple voltage divider

informatin here :

voltage divider can drop the 5 volts down to ~3 volts.

http://en.wikipedia.org/wiki/Voltage_divider

http://michaelvogel.files.wordpress.com/2009/09/usb-diagram.gif?w=501&h=362

The standard USB A plug (left) and B plug (right)
Pin 1 VCC (+5 V)
Pin 2 Data-
Pin 3 Data+
Pin 4 Ground"

(Drum Machine) Korg ER MK II - Techno/Minimal/Groove

YouTube Uploaded by AlejandroParada303 on Apr 9, 2010
Vive Chile!

Playlist:
(Drum Machine) Korg ER MK II - Techno/Minimal/Groove (Demo 1) -"Demo 1 - Korg Electribe ER Mk II - Drum Machine * Sitio Web http://www.myspace.com/pezimodiscos * Download 1999-2008 http://www.4shared.com/dir/27000725/40e7a9ea/sharing.html"

(Drum Machine) Korg ER MK II - Techno/Minimal/Groove (Demo 2) - "Demo 2 - Korg Electribe ER Mk II - Drum Machine * Sitio Web http://www.myspace.com/pezimodiscos * Download 1999-2008 http://www.4shared.com/dir/27000725/40e7a9ea/sharing.html"

(Drum Machine) Korg ER MK II + Pedal FX - Techno/Minimal/Groove (Demo 3) - "Demo 3, Korg Electribe ER Mk II - Drum Machine, Bass and Drums only Electribe ER. * Sitio Web http://www.myspace.com/pezimodiscos * Download 1999-2008 http://www.4shared.com/dir/27000725/40e7a9ea/sharing.html"

(Drum Machine) Korg ER MK II + Pedal FX - Techno/Minimal/Groove (Demo 4) - "Demo 4, Korg Electribe ER Mk II, Drum Machine, Bass and Drums only Electribe ER + Pedal FX * Sitio Web http://www.myspace.com/pezimodiscos * Download 1999-2008 http://www.4shared.com/dir/27000725/40e7a9ea/sharing.html"

Din Sync OSC 303 + SSL Steiner + DOTcoms + MORE!

YouTube Uploaded by MrRitchieDrums on Aug 27, 2011

"Hurricane Irene has got me indoors. Luckily the power is Still going, so I fired up the sequencers and my New OSC 303 by Din Sync! Also 4ms clock multiplier being shuffled,rotated&slipped, SSL Steiner filter, Mattson VCA, Tom Wiltshire digital ASDRs, Synthesizers.com Q106's as LFOs, Q150 filter, Q171, Q108 & Q110 Noise in the audio section of the Catgirl sequencer"

Electra EP-501 Sampler Delay demo

YouTube Uploaded by FOCtv on Aug 27, 2011

"Demo featuring the Electra EP-501 Sampler Delay. In Logic I'm using a preset beat from Ultrabeat. The EP-501 is being controlled by a MIDI-to-CV converter. Ultrabeat is being fed into the EP-501 which is sampling the beat. The pitch and gate of the EP-501 is coming from a MIDI track in Logic. The EP-501 takes a sample each time it receives a gate signal and loops it until the next gate signal."

Insanity in the App World

YouTube Uploaded by JCRUDESS on Aug 27, 2011

"MorphWiz Midi is back and controlling SampleWiz which is running in the background on the same device!"

Jordan Rudess: Wizdom Music, LLC
iPads on eBay
iPod Touch on eBay

SympleSynth

YouTube Uploaded by bchris1776 on Aug 27, 2011

"This is my answer for an Ultra Simple Synth voice for your Baby 10 or other sequencer build. It's designed to be EASY to build and uses the absolute minimum of parts for its functions. It was a response to so many people building Baby 10's and using them to make terrible sounds with 555 circuits. :) You know who you are.
This will make music/noise/sound with anything that outputs a CV (Control Voltage) (1 to 5 volts or so) and Gate or Trigger of a couple volts - for example the SympleSeq DIY sequencer kit. You could even plug your vintage analog synth keyboard or Ribbon controller into it if you want - but don't expect 1 volt per Octave. This IS a very crude VCO, VCF and VCA approximation on one small PCB with about $15 worth of parts (much less if you shop smart)
Top two knobs are Filter cut off and Filter Res, second two are Attack / Decay, Red knob is VCO 2 pitch, and the switch chooses VCO1, VCO2, or Both
This is recorded direct into the computer - no processing."

the Insect Orchestra

YouTube Uploaded by JvGrieken on Aug 27, 2011

"This is a project I did for evaluation at HKU school of fine arts Utrecht. It uses an arduino to process the inputs from the light sensitive resistors and outputs it as a midi message. Software on the computer then turns this value into the corresponding note. All the sounds are made in Ableton Live and in the second part of the video you can hear the 4 different modes, instruments, synthesis, samples and drums."

Bridechamber to Handle MOTM DIY

via Paul Schreiber of Synthesis Technology, aka MOTM:

"Beginning Thursday Sept. 1st, Scott Deyo of Bridechamber (www.bridechamber.com) will be taking over my 'MOTM 2.0' side of the business.

These are the 'DIY' parts: the blank pc boards, panels, rails, connector boards, etc. I will still handle the assembled module orders.

I will be transferring this inventory via Fed-Ex ground on Tuesday. It will take a few days to travel from Texas to Minnesota. Scott has the web pages ready to so 'live' on the 1st. The pricing will be *exactly* the same.

If you have a current order, or place an order by tomorrow, I will still ship it. But orders placed after this will be shipped by Bridechamber.

I will have notification on the site and on the ordering pages to redirect inquires to Bridechamber on the 1st.

There are some items that are low in inventory and Scott will not have them immediately. They are: MOTM-20 power cables, MOTM-490 DIY parts and MOTM-800 DIY parts. Also, he will have limited BR1 and BR-15 brackets until my reorder arrives in ~ 18 days. It's going to take a bit of back-and-forth to get everything accounted for and everyone happy.

Scott is doing all of us a great favor by doing this, as this will free up more time for me to address the assembled/kit backlog. Please email me if you have any worries or concerns.

Paul Schreiber
Synthesis Technology"