MATRIXSYNTH

Korg Mono/Poly Monophonic/Polyphonic Synthesizer SN 379453 w/ Original Green Gig Bag

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Roland Juno-106 Keyboard Synthesizer SN 407376

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Sequential Circuits Pro One Keyboard Synthesizer SN 1772

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Vintage Sequential Circuits Pro One analog synth. Keyboard is the J-wire version. The synth functions as it should and is in very nice shape."

CLICK FOR MORE »

Yamaha CS-5 CS5 vintage monophonic analog synthesizer SN 3031

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

DiscoverNoise // Arturia - CS-80 V3

Published on Aug 2, 2018 DiscoverNoise

DiscoverNoise 156-
DiscoverSoftware 034-

Here is a little demo of the Arturia CS-80 and some of its presets.

Frogger Theme Played on a Atari Punk

Published on Aug 2, 2018 MrCaliforniaD

"Feel free to ask any questions concerning this video in the comment section."

Endorphin.es Grand Terminal as a Full Synth Voice

Published on Aug 2, 2018 DivKidVideo

"Here's a potentially unexpected way to use the Grand Terminal from Endorphin.es ... A SYNTH VOICE! Complete with VCO with variable wave shapes, dual series filter (state variable high pass into low pass here - MS-20 style!) and an envelope to modulate the filter. The icing on the cake is the excellent FX section with is in the tape echo emulation here which has a great modulated / saturated warm echo trail. Lovely stuff!"

nonlinearcircuits Shat noir Phaser

Published on Aug 2, 2018 cirtcele

"The core of the Shat-noir phaser is based on classic LDR based phaser designs, notably the Carlin, Compact Phasing A, Morely Phaser and ADA final Phase. The CV drive is an anti-log circuit, it works a little differently as both the CV and phase pots must be adjusted to find the sweet spots. The In2 pot is 0 at centre, the incoming signal is inverted below that. it is intended as a feedback input for one of the stage outputs, but shove in whatever you want of course.

Please note the build pictures below when constructing to make the box fairly light-proof. A little bit of leakage does not seem to matter much but you could add a bit of black silastic sealant around the edges if you really want to. When soldering the connector pins, use the SIP connectors, jumped across 1 or 2 pins (see pics) to ensure they are nicely perpendicular to the PCB. When soldering the PCB to PCB connectors, I press lightly on the PCB to help keep the connectors tight against the board.

The PCBs are 2mm thick with black soldermask to prevent light getting in. Also, please note the pots go on the side of the PCB that has the pot symbol screenprinted, this is different to previous NLC PCBs……I try to conform, its hard, really hard. Anyway look at the pics to make sure.

PCB set = USD24 Panel = USD22 assembled = USD220"