Wednesday, February 12, 2014
Tiptop System Valhalla DSP
Published on Feb 12, 2014 Tiptop .Audio·54 videos
"Drums pass through the Z2040 filter that gets modulated by the Z4000 EG. A bass line made of two Z3000 mixed by the MIXZ and sent into another Z2040. The BandPass out of the HATS808 is sent into the Feedback input of the Z-DSP, this gives this high pitched drone, Drums and bass line into the Stereo in of the Z-DSP, the Z-DSP runs the Valhalla DSP prototype card."
Roland Juno-60 "London Trip"
Published on Feb 12, 2014 RetroSound·263 videos
"(c) 2014 vintage synthesizer demo track by RetroSound
all synthesizer sounds: Roland Juno-60 Analog Synthesizer (1982)
drums: Roland TR-808 (1981)
recording: multi-tracking without midi
fx: reverb and delay
I used the internal arpeggiator for the bass sequence."
Mutable Grids Sequencer, JoMoX ModBase 09 & MBrane 11
Published on Feb 12, 2014 bigcitymusic·296 videos
"Here's our first experiment with the Mutable Instruments Grids Topographic Drum Sequencer. We're using the Grids to sequence the Jomox ModBase 09 Bass Drum module, Jomox ModBrane 11 Percussion module and Mutable Instruments Braids module. Additional synthetic percussion is being provided by the Cwejman D-LFO running at audio-rate."
Buchland System
Published on Feb 12, 2014 Ebotronix·946 videos
Roland System 100 , Jupiter 6 (BP pad), EF 303 (sequencer)
Buchla System #1
Kenton Pro Solo Mk2
Moog CP251
Sherman Filterbank 2
Alesis 3630
Yamaha MCS 2
FX Lexicon PCM 90
Boss DR770 kick
Stereo Designer - New Effects App for iPad
Published on Feb 12, 2014 HoldernessMedia .·37 videos
Stereo Designer for iPad: Manipulating Stereo Image
Published on Feb 12, 2014
"Download: http://stereodesignerapp.com/download
The song used in this video is my own: https://www.youtube.com/watch?v=0S4bS...
'Floehang' from the album Pray."
Process synths, drum machines and hundreds of other apps by connecting through Audiobus. Use Stereo Designer as an effect inside Garageband, Auria, Cubasis, and AudioShare using Audiobus or Inter-app audio.
Stereo Designer features two distinct modes: PERFORM and TWEAK.
● PERFORM mode is focused around four XY touch pads. Touch to control LOW PASS, DELAY, PAN and OUTPUT gain independently for left and right channels.
● TWEAK mode features large expressive sliders and additional effect parameters, allowing you to fine tune your sound. In addition to Audiobus and Inter-app Audio support, Stereo Designer can also process external instruments such as guitar, voice and synths by connecting a microphone or professional audio interface such as the Apogee Jam, ONE, or any iOS compatible USB audio interface.
For more info and video demos visit: [link]
Check out our other FX apps including Echo Pad and Swoopster!
COMPATIBILITY:
● requires iOS 7.0 or later
● iPad Mini/iPad 2 or newer
● Audiobus compatible (Effect,Input)
● Inter-App audio compatible (effect node)
● compatible with USB audio interfaces
FEATURES:
● Control individual Left/Right channel volume, panning, filter and more.
● Mid/Side (M/S) processing mode lets you adjust the volume, high and low pass filters for Mid and Side independently.
● Widen or reduce the stereo width of an input signal.
● Independent panning position of each channel, allowing for interesting stereo placement.
● Individual High and Low Pass filter per channel for additional stereo shaping.
● Phase (polarity) invert Left/Right channels.
● Isolate the Left or Right channel and manipulate the resulting mono signal.
● "Stereoize" mono inputs using individual channel delay + High and Low Pass filters.
● Sum Left and Right channels to mono.
Touched By Sound Clap Cussion ACM2 SN B01873
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The clap sound can also be triggered via MIDI (on any channel), and will respond to velocity information. The note that it's mapped to is the C# above middle C (note number 61).
The Clap Cussion is incredibly versatile, creating a myriad of clap sounds via 7 synthesis parameter knobs on the front panel.
This ACM2 is still in great shape and would certainly make an excellent addition to your electronic instrument collection."
via this auction
"The clap sound can also be triggered via MIDI (on any channel), and will respond to velocity information. The note that it's mapped to is the C# above middle C (note number 61).
The Clap Cussion is incredibly versatile, creating a myriad of clap sounds via 7 synthesis parameter knobs on the front panel.This ACM2 is still in great shape and would certainly make an excellent addition to your electronic instrument collection."
DJ Sasha's Roland TB-303 Bassline Synthesizer with Devilfish Mod SN 034 ?
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This was DJ Sasha's Roland TB 303 with the DevilFish mod (serial number 34) Just had it checked out by the Analog Lab in NYC and everything is fully functioning."
via this auction
"This was DJ Sasha's Roland TB 303 with the DevilFish mod (serial number 34) Just had it checked out by the Analog Lab in NYC and everything is fully functioning."
HorriblerAlien2 - Hybrid Music 5000 Software on BBC Model B
Published on Mar 22, 2013 Franco Cesarelli·47 videos
"In the late 80s I amused myself with my BBC model B and the Hybrid Music 5000 software. It was an amazing program at the time. I have not had as much fun with any computer music program since. It could be persuaded to do both interesting and silly things."
"The BBC Microcomputer System, or BBC Micro, was a series of microcomputers and associated peripherals designed and built by the Acorn Computer company for the BBC Computer Literacy Project, operated by the British Broadcasting Corporation. Designed with an emphasis on education, it was notable for its ruggedness, expandability and the quality of its operating system..."
BENGE LOOP SERIES ONE: BUCHLA 100
"BENGE LOOP SERIES ONE: BUCHLA 100
A series of albums recorded on a single electronic music synthesiser (or group of related instruments incorporated into a system) utilising a method of composing and recording called Looping
Looping is achieved using a technique whereby sounds are recorded either digitally or to tape which is set to loop around upon itself at various fixed lengths of time, ranging from a few seconds up to several minutes depending on the compositional effect required for each individual piece of music
There are many variables within this framework which determine the nature of the composition such as: LOOP DURATION; NUMBER OF CHANNELS; STEREO POSITIONING; LOOP FEEDBACK, etc. Thus, the ‘rules’ of each musical piece can be set up in advance allowing the composition to flow naturally from any given starting point
On this first record the sound source is a Buchla 100 modular analog synthesiser dating from the 1960s. This instrument in itself allows for extremely complex multi-dimentional events to be set up, including elements relating to pitch, timbre, time, duration, rhythm, harmony, reverberation, stereo location and the like. Furthermore it can be manipulated very easily in real time, using the various potentiometers and touch plates. The looping techniques used here included multitrack digital recording (Electro Harmonix 2880), monophonic tape loops (Roland RE501) and various combinations of the two
credits
released 11 February 2014
(c) 2014 Benge / Memetune Studios, London
expandingrecords.com
memetune.net"
KORG volca beats/bass/keys : acid house
Published on Feb 12, 2014 Masaki Takada·11 videos
"with MIDI Out&Individual Out Mod.
Mixer:ALLEN&HEATH ZED-10
FX:Eventide SPACE
Compressor(FX Ducking):FMR AUDIO RNC1773
Master Compressor:dbx 166XL"
Hardware emotions - KORG Volca Beats (eng)
Published on Feb 12, 2014 quadrosh·38 videos
"KORG Volca beats overview"
Volcas on Amazon
| Volcas on eBay
New Teia Synthesizers Eurorack Modular Maker - Stochastic Function Generator
Published on Feb 12, 2014 teia synthesizers·1 video
"The Stochastic Function Generator is the first Eurorack module design by TEIA Synthesizers."
Features overview:
-Random Rise and Fall determined by Maximum and Minimum knobs.
-Maximum knob value below the Minimum knob value module works as regular envelope generator.
-Switchable between Gate and Trigger.
-Loop mode(LFO mode).
-Gate Out proportional to the length of the Rise portion of the envelope.
- Inverter and attenuater control knob.
-Extra Bipolar output.
- Three speed modes, High , Mid and Low. Jumpers to change speed modes from Low to Super Low mode and High to Super High
Expansion Features:
Cv control over All Maximum and Minimum settings.
Gate input to activate/ deactivate loop mode.
CV output with the resulting random voltage value from the Rise and Fall knob settings.
All the best,
Ruben"
via Muff's
"---------------------------------------------------------------------- ------------------------
Original post
Hi all!
I present you the Stochastic Function Generator!
I want to show you guys something i've been working on for some time now, it's still not yet finished but i feel like is already worth showing.
So, the basic concept is, every time you feed a gate/trigger to the "Gate in" input the module randomizes a Rise(Attack) and Fall(Decay) value between the minimum and maximum knob settings. It has multiple uses, from playing subtle swing variations to crazy envelope shapes.
Setting the Maximum knob value below the Minimum knob value will cancel the stochastic process and it will work as a regular Attack and Decay envelope.
This is an hybrid circuit, this means the Function Generator (AKA Envelope Generator) core is analog and there is also a microcontroller to spice things up.
More:
- Switchable between Gate and Trigger.
- The Loop switch will re-trigger the envelope at the end of it's cycle.
- 3 speed modes, High , Mid and Low.
- There are two jumpers on the back to change speed modes from "low" to "super low" mode and "High" to "Super High".
- The "Gate Out" is a gate signal with the same length as the Attack portion of the envelope. This only works on trigger mode.(Useful to get random gates when loop mode is set)
- Manual trigger/gate push button
- The middle knob is an inverter and attenuater knob of the output signal.
At the moment there is also a simultaneous inverted output, but i'm considering changing it to a bipolar output, in my opinion this would be more useful to use it as a weird LFO in loop mode. What you guys thing?
Right now i'm re-doing the panel layout and i'll upload some videos/sound samples when i'm done with the new panel.
I might consider doing a small run (10 or so) if there is enough interest.
Coments, questions, suggestions and improvements are appreciated! please be kind thumbs up
Regards,
Ruben"
J Dilla - Phantom of the Synths (VoltageCtrlr cover)
Published on Feb 12, 2014 VoltageCtrlRtv·21 videos
"This composition is dedicated to the memory of the legendary HipHop producer J Dilla.
I find it very important to keep an artist legacy alive by giving thanks for their
creative accomplishments and respecting their work and not stepping on their toes.
A lot of people do Dilla tributes but most of them are written from a HipHop perspective, that's totally cool. i just wanted to do something different.
Given that HipHop producers sample from all styles of music I thought it would be an
interesting exercise to listen to a Dilla produced song and make an analog modular synth composition inspired by his use of Giorgio Moroder's 'Theme From Midnight Express',
I made sure to not listen to the original before recording because I didn't want it to influence my version.
This is a live one take improvised modular synth performance, no multi tracking, samples or editing. This composition begins with the feeling of loss and sorrow knowing that Dilla's catalog of music is complete and he will never write another song... then I slowly bring in the main melody and from there I pick up the pace as an energetic celebration of his life and legacy.
This is just an auditory thank you from me to Dilla and his family.
Be sure to donate anything you can to the Dilla foundation.
http://jdillafoundation.org"
via Shiro Fujioka on The MATRIXSYNTH Lounge
Thingamagoop 2 + Eurorack
Published on Feb 12, 2014 Bleep Labs·31 videos
"Thingamagoop 2 CV out to a DPO and Jupiter Storm.
Also used are the Optomix, Phonogene, Echophon, Synthi Filter, and Resonant EQ.
Made by Thomas Fang and Cordey Lopez of Bleep Labs.
Kits and fully built units available at bleeplabs.com"
Serge - Februar 11, 2014 - Excerpt
Published on Feb 12, 2014 batchas·171 videos
Update:
Serge - Februar 11, 2014 - Part 1
batchas·172 videos
Published on Feb 12, 2014
"Play loud!"
Serge - Februar 11, 2014 - Part 2
The Korg Volca Series: 3 Volcas Combined- Song 5
Published on Feb 12, 2014 AutomaticGainsay·197 videos
"The instruments in the Volca series are excellent individually, but they can also be combined to create a miniature electronic studio.
When I first acquired the Volca series, I combined them, improvised sequences, and then shot myself improvising manipulation of those sequences. That is the origin of these 3 Volcas Combined videos.
In the right hands and with a little practice, some great music can come out of these as a set. Don't let my little experiments fool you. ;)
Because I got tired of looking at my face, I have created weird visual narratives from vintage educational films to go along with these songs.
Please forgive me for the sloppy mixes... in haste, I ran them all through a single mixer for recording during performance.
Thanks for watching!"
All parts here.
Roland JUNO 106S SN 500145 with Original Roland Case
ROLAND SH-101 Vintage Analog Monophonic Synthesizer SN 364270
ROLAND RS-09 Organ/Strings SN 811663
MOTM Fritz Double Deka Ultrasonic VCO
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Very nice Synth Module!
Professional build
Actual item in pics.
All info is here"
via this auction
"Very nice Synth Module!
Professional build
Actual item in pics.
All info is here"
Buchla 296 Spectral Processor Clone
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This is an absolute perfect reproduction of the beautiful Buchla 296 Spectral Processor. If you've ever heard the original , you will know that nothing sounds quite like it. Sounds just as glorious as the original BUT , and this is important , it is much , much quieter. The original circuit , all though beautiful sounding , was quite noisy. Here you have all the beauty and hardly any of the noise. The original versions of these are pretty much impossible to find anymore , so don't let this slip away. Low reserve. Good luck."
via this auction
"This is an absolute perfect reproduction of the beautiful Buchla 296 Spectral Processor. If you've ever heard the original , you will know that nothing sounds quite like it. Sounds just as glorious as the original BUT , and this is important , it is much , much quieter. The original circuit , all though beautiful sounding , was quite noisy. Here you have all the beauty and hardly any of the noise. The original versions of these are pretty much impossible to find anymore , so don't let this slip away. Low reserve. Good luck."
Fender Chroma Polaris II Synthesizer Model 2123B SN 500519
CR-8000, Evolver, Kurzweil K2VX
Published on Feb 12, 2014 acreil·74 videos
"Dave Smith Instruments Evolver sequencer triggered by Roland CR-8000 (details on the trigger conditioning circuit here: http://acreil.wordpress.com/2014/01/1...), all overdubs are Kurzweil K2VX (no external samples used). Effect processors used: Ibanez SDR-1000, Tapco 4400."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
