MATRIXSYNTH

Saturday, May 14, 2011

Strafing The Racetrack.mov

YouTube Uploaded by davidryle on May 13, 2011

"A quick demonstration of Yves Usson's Voltage Controlled Quadrature LFO. I sent each quadrant into a separate oscillator . The same voltage was split with a "Y" cable and sent to adjacent amplifiers. For instance, if the voltage from zero degree was sent to oscillator one then the same voltage was sent to amplifier two which had the 90 degree oscillator running through it. The voltage from 90 degrees was sent to oscillator two and the same voltage was sent to amplifier three, etc..
This made the quadrature become the delay envelope to the rising/falling portion of the next quadrant pitch only. When the "direction" switch was thrown, the pitch changed direction from rising to descending.
In this demo the voltage control (FM INPUT) was not used. This is a powerful feature which Yves built into the design."

waiting for MEET THE KNOBBERS liveset!!!

YouTube Uploaded by capougello on May 14, 2011

"assaggino della performance che sto preparando per la serata live @ MEET THE KNOBBERS... enjoy!"

A path to glory (Plogue Bidule + Scoofy Kamilla VSTi + GVST GComp VST)

YouTube Uploaded by GruithuisenCityMan on May 14, 2011

"Hello ! My name is Frederic Gerchambeau. I have made this movie and this music. The music has been made in one take using Plogue Bidule, the Scoofy Kamilla synth VSTI (x2) and the GVST GComp compressor VST. Enjoy !"

iFS1R v1.2 Wireless iPad Editor Now Available‏‏

"Apple has released iFS1R v1.2 for Yamaha FS1R, a free upgrade for all iFS1R v1.1 users.

iFS1R v1.2 offers:
- a redesigned look & feel for enhanced readability plus some very tiny UI adjustments to make the workflow even better
- parameter default value buttons. In v1.2, if you touch the parameter value label, it resets the label and slider to a default value (ex: Operator Coarse Frequency = 1.00, Operator Fine Frequency = 1.00, etc...) for each parameter... this is the fastest workflow you'll ever get in sound designing!
- iFS1R automatically enables / disables the relevant parameter set based on some parameters values (ex: Wave = Formant enables the formant parameters and disables the other non-formant parameters) to help you master the unit."

iFS1R - iControlMIDI
iPads on eBay

Friday, May 13, 2011

MeeBlip Reloaded

via MeeBlip
"We’ve updated the MeeBlip DIY hacker kit after receiving lots of feedback from builders. The biggest change (apart from the color) is that the I/O jacks are now mounted on the bottom of the board. This will make it much easier to mount in a case or behind a panel. There are a number of other tweaks, too:
A new power switch on the top right of the panel
We’ve upgraded to a 1 Amp 7805 voltage regulator
The MIDI Channel DIP switch has been moved to the bottom rear edge of the board
We’ve removed the USB power connector and 3.5 mm audio jack
Analog and digital grounds are now split at the DAC for lower noise

We’ve also reduced the price to $69. The Full Board Kit includes the circuit board, components, programmed microcontroller and knobs. You can use your own 9 VDC power supply, or get one of our regulated wall warts for $9.

Does not include a case or panel overlays — that part is up to you. Be sure to share photos of your creations in the forum!

MeeBlip kits and accessories are available on our Get One page."

Unboxing Arturia Spark

YouTube Uploaded by audiomidicom on May 13, 2011

"Spark is a virtual drum instrument combining analog and physical modeling with samples and a fast, intuitive hardware controller for easy creation of block rockin' beats. And at just $549, anyone can afford the power of Spark!"