Analog Ordnance - PE Machine Eurorack Module

Published on May 19, 2014 blaman2012·37 videos

Note this is the first Analog Ordnance post. There was one previous post featuring blaman2012 here.

"PE Machine demo

The PE Machine is a synthesizer capable of heavy grating, hissing and rhythmic power electronics / harsh noise sound, Three tunable oscillators, manual voltage control and slip (slide) control
Each of the oscillators has a different configuration - LFO - MFO - HFO (Low-Mid-High-Freq oscillators)
It has CV input for hooking up to sequencers etc"

Synthesizers.com Modular Adventure

Published on Jun 14, 2013 wogsalg mit·7 videos

"What can we do with a Dotcom Studio-66 and an armful of patch cords?

(Just the synth in real time - one take, no overdubs, no other gear used and no EQ or effects.)"

Synthesizers.com Live Performance

Published on Nov 7, 2012 Manuel Schulz·1 video

"This is my Synthesizers.com Studio System 110 played live. There is no playback; just one delay on the first of the two output channels."

Analogue/Lofi Techno Jam - Eurorack, Mode Machines SID, Vermona DRM

Published on Mar 15, 2014 Mono Jono·2 videos

"A recording of some Jammin'

On Lead:
Intellijel Dixie
Bubblesound VCOb (into VCF sub osc input).
Blue Lantern Asteroid VCF
Rohren (tube) VCA (for distortion)
ADDAC sys 101
Mode Machines SID

On Bass:
Intellijel Dixie
Dinsync.info VCF 303 (with overdrive cranked up)
Asteroid VCA stage

On Drums:
Vermona DRM

Arranged by: Analogue Solutions Oberkorn sequencer

Synth mixed by:
Pittsburgh M3

A couple of short techno tunes.
All sounds from the Asteroid VCF (Dixie, VCOb and ADDAC 101) are fed through a Rohren (tube VCA).
The VCF 303 is fed a squeare from the Dixie and is run through the VCA on the Asteroid VCF. A CV channel from the Oberkorn is fed to the VCF 303s CV in, which causes the filter to fully open up (if you were wondering why it disappears into a tweeting budgie!
The above are sequenced by the Oberkorn.
The Sid is used for a couple of glitchy 8 bit sounds.

Really this is just part of a jam and is not a professional job."

Modular synth Jam (electro/tech) feat VCF303 and BL Asteroid VCF

Published on Apr 17, 2013 Mono Jono·2 videos

"A simple patch to show some analogue music and some twiddling as opposed to patch complexity.
We have:
Oberkorn (off shot) CV channel A to Pittsburgh M3 mutilple stage and onto Dixie vpo in.
and VCOb vpo in.
Oberkorn CV channel B to Blue Lantern Asteroid VCF FM in.
Oberkorn gate channel 1 to Doepfer a140 in.
Doepfer a140 out to DIN Sync.info VCF 303 Accent in.
Oberkorn gate channel 2 into the ADDAC 101 trigger in.
Dixie SQ to VCF303 in.
DIxie pulse to Asteroid VCF in (VCF303 out goes through the asteroids separate VCA, but is left open.
VCOb pulse to Asteroid VCF sub oct in.
Analogue solutions LFO NZ triangle into Asteroid VCF CV mod in. This is attenuated by the polarised larger lower pot. Clockwise opens it up and anti inverts the signal.

All drums courtesy of the Vermona DRM (off shot),

This kicks off with a bit of electro and about 3/4 through (rather clumsiliy) I disconnect the dixie and the vcob from the asteroid vcf and patch in the ADDAC 101 which is fed into a new audio channel with a smidge of delay. This is modulated by the lfo nz into the asteroids fm in and twiddled by me!

Apologies for the quality and half my stuff being out of shot. This is my first vid and first attempt at synching video and audio (it goes a bit pear shaped towards the end and ill learn how to merge 2 video sources (from the mob sat on the euro case pointing at the Oberkorn and Vermona DRM) soon!
Im also a "beginner" at precision patching!

Many thanks,"

MODULAR SYNTH JAM #4 - Dirty Electro / Techno

Published on May 19, 2014 DivKidMusic·25 videos

"Jam number 4 in our series of videos we're using as 'extended vines'. If you use Vine search DivKid and check our videos there. We post all sorts of production and modular bits but 6 seconds isn't enough for some patches, so here's an extended video with a dirty electro / techno patch.

Drums are single shot sounds just sequenced in the computer and the rest is all modular.

As always feel free to comment and like, don't forget subscribe for more videos coming every week."

Disharmonious Silver Stake

Published on May 18, 2014 kuxaan sum·198 videos

"SubCon Model 52 Vampire Explorations"

Polyglide, made with a Eurorack Modular, Casio CZ-1 and Roland Super Jupiter MKS-80

Published on May 18, 2014 Ben Burling·3 videos

"Made using Braids, Koma SFV-201, Maths, Rene and a Casio CZ-1"

Spark Flower (Cinematic) = Eurorack Modular + Cocoquantus + Octatrack + Leap

Published on May 18, 2014 A Box In The Sea·10 videos

"I've been wanting to experiment with the Cocoquantus as a modulation source for my Eurorack Modules. I combined the Braids and Morphing Terrarium through the Echophon and Zdsp (Valhalla card). Everything is clocked by the Maths with Rene sequencing the notes. I wired the Coco to itself and took the most promising points to a format converter and out to all the mod points on the Braids and MT. I used a Dave Jones O'tool to monitor a couple of the sources for visual feedback and an LFO on the Analog 4 to switch back and forth between waves on the Braids. I used the Turing machine to clock the 4MS SCM+Breakout for variations on the pattern from Rene. The percussive sounds are from the Braids and processed through a convolution reverb (I picked up the Impulse responses from Diego Stucco's new library Rhythmic Convolutions http://www.diegostocco.com/ffs-rhythm...). The Leap is controlling 2 custom Reaktor patches so I can swell sounds together. Let me know if you have any questions."

Oberheim Xpander Amazing Condition Analog Synth

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »