MATRIXSYNTH

Nice pads in Eurorack with the TipTop audio Time Fabric card for Z-DSP

Published on Jan 3, 2016 Nicolas Lévy

"Taking a single saw patch and turning it into a nice pad with pitch shift and delay thanks to the Time Fabric card for Z-DSP.
Rhythm by the Zularic Repetitor and a few TipTop 808 modules filtered by the WMD/SSD Pole Zero.
Rene sequences MI Rings + Piston Honda mk2 in an Optomix, then Modcan Dual Delay."

Serge modular & Eventide Space rythmic patch

Published on Jan 3, 2016 Chris David

Custom KORG MicroKORG with Angled Front Panel

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Rock Solid modified MicroKorg includes microphone and power supply.

1/2" Red Oak finished

This mod makes the microKorg MUCH easier to use - no more hunching over the keyboard trying to read the selector knob guide.

There is some discoloration at the battery compartment (shown) but this was cleaned up and there was no effect on internal components. It is cosmetic discoloration only.

The Korg itself is held into the cradle with 4 screws on each side which are easy to remove if you want to disassemble. (if you want to paint, etc.)

There are 4 finish nails holding the end-boards to the bottom runner on each side. These are visible, but are sanded smooth. The ends were not glued so these could theoretically be removed as well. The finish nails were driven into pre-drilled holes.

This is fully functioning and is a nice solid piece -"

CLICK FOR MORE »

Blue PE Minisonic

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Practical Electronics Minisonic analog synth.

These synths were constructed from schematics in the practical electronics magazine and are quite rare. This one uses the PCB that was available from the magazine.

This is being sold as spares or repair because VCO 1 is not functioning correctly, it can be heard but is not responding to the controls on the panel. VCO 2 is working as are the envelope generators. I am unable to test the filter and ring modulator because I have lost the patch cables. There is also a tear in one of the speakers.

I have copies of the magazine articles with schematics so this is probably and easy fix for someone with the right knowledge."

GeoSynths Ep3 - Strymon DIG Pedal on Synthesizers.

Published on Jan 3, 2016 GEOSynths

"Using a Strymon DIG pedal on both a Dreadbox Erebus and a Moog Sub 37. While I do have a Strymon Timeline and Eventide H9 (and many more delays) I really like the sound I get from the DIG pedal."

January '16 Jam - Nord Moog Prophet Minibrute

Published on Jan 3, 2016 Mitch Wiseman

"A little improvised jam all played in live. The mini brute it going through a few effects in logic, the moog is going through an MXR carbon copy, and the prophet has a bit of valhalla reverb on it. For some reason the prophet was internally clipping, which I couldn't stop no matter what i tried.

Album coming soon..."

DSP Synthesizers DSP-D8 Drum Chip Goes Open Source

via DSP Synthesizers

"With the release of the dsp-CR4 and R-606 virtual analog modelling chips I have decided to make the code for the PCM based dsp-D8 open source.

Now anyone with an Arduino can use the code and even change the drumsound to your own drum kit."

prophet-6 / TB-303 / analog RYTM / SPACE / multiclock

Published on Jan 3, 2016 Masaki Takada

"My First session of DSI prophet-6."

Synth Jam- Roland System 1m - Moog Werkstatt - Beatstep Pro - Microbrute - Mopho - EMX1

Published on Jan 3, 2016 Earmonkey Music

"Continuing my Synth Jam Journal, here's today's entry. The thing I tried to do here was incorporate the System 1m patch points with the Moog Werkstatt (Mother 32 coming on Tuesday!!!).

Here are the connections: Beatstep Pro CV Pitch out to Werkstatt VCO EXP FM IN. I don't have any gate being sent to the Werkstatt because the Werkstatt VCA mode is set to ON so it drones. The System 1m is sending CV out of the ENV to the Werkstatt VCF IN so that every time I play a note, the filter on the Werkstatt is affected. The Werkstatt LFO is set to square mode and is modulating the VCF internally, so the additional VFC modulation gives more movement. Finally, the LFO OUT of the Werkstatt is going back in to the System 1m Filter LFO so the System 1m and Werkstatt filters are both being modulated by the Werkstatt square wave LFO.

The Mopho is playing simple bass notes also from the Beatstep pro via MIDI on the same channel as the Werkstatt so that bass line is doubled.

And of course, the Microbrute and Werkstatt are running through the Roland RE-301 Space Chorus. There's a bit of Valhalla Ubermod and Shimmer on the whole mix to just give it more life."