[Week8] Juno

Published on Feb 23, 2018 Optimistic

Roland Juno-106, MFB Dominion, Elektron Analog Rytm, KORG KAOSS Pad KP3?, and more.

New Corsynth DR-01 Bass Drum 5U/MU Module

"All sounds from the Corsynth DR-01 Bass Drum module. Four DR-01 has been used to create these demos."

via Corsynth

"The DR-01 Bass Drum is the first of a new series of Corsynth modules dedicated to analog drum synthesis and it’s also the first module of this kind commercially available in MU format.

Create a drum sounds from scratch using a modular synthesizer is always time and resourcing consuming. With the DR-01 you will save a lot of space, money and modules that can be used for other purposes. The DR-01 has all you need to create bass drums , toms a many other percussive sounds in just one single space. And thanks to the Tune CV input is even possible to use the DR-01 to create bass lines.

Punchy techno drums, industrial drums, drum sounds of the firsts analog drum machines, FM sounds… With the DR-01 is really easy to get the sounds that you need at every moment. All the parameters in the module have been carefully chosen to be used in a drum synthesis context (envelope times, oscillator frequencies, oscillator waveform etc ).

These are the DR-01 Bass Drum main features:

A voltage controlled oscillator with dedicated CV input for tuning.
A voltage controlled timbre circuit.
A dedicated tune modulation envelope.
An amplitude envelope with three different settings for the attack time.
It’s time to add drum sounds to your synth sequences! .

The DR-01 Bass Drum is built using high quality electronic components, Switchcraft jacks, Cosmo knobs (the same used by Moog Modular) , anodized aluminum front panel…."

Experiment Fifty One

Published on Feb 22, 2018 Oliver Dodd

"A Video Series of Short Eurorack Modular Synthesizer Impromptu Experiments and Improvisations exploring ambient, experimental and drone."

Artwork ft. Oberheim Matrix-12 + Eurorack Synthesizers

Published on Feb 22, 2018 gstormelectro

"Audio + Video by G-Storm Electro c.2018

Oberheim Matrix-12 synthesizer + Eurorack = match made in heaven. Glitch beats + melodic pads/strings. Everything performed live, recorded on-the-fly. Reverb on Matrix-12: Strymon Big Sky. Delay: Eventide Timefactor. Some post-processing including compression + eq. Be sure to like and share!

Euro modules: CEM3340 VCO going through my Jupiter-6 VCF module - bass, Noise Engineering Basimilus Iteritas Alter - Kick/Snare, Pittsburgh Modular DNA Symbiotic Waves going through my Tonus VCF - other percussion, Tiptop Hats909 - closed hat, G-Storm Infusor - percussion sub-mixer, Mutable Instruments Clouds - percussion granular mangling, Malekko Varigate4 - percussion triggers."

Elektron Analog Four MKII With A Tiny Modular Synth

Published on Feb 22, 2018 Perfect Circuit Audio

"This video shows how an Elektron Analog Four MKII can be used with a eurorack modular synthesizer. The Analog Four can output 4 CV signals for triggering and controlling sounds from the modular and the modular can be plugged into the Analog Four to be mixed with the other voices and be run through the effects. The Analog Four is triggering a Noise Engineering Basimilus Iteritas Alter, WMD Chimera and Make Noise synth made with STO, Function and LxD.

Analog Four MKII available here: https://www.perfectcircuitaudio.com/e...

Basimilus Iteritas Alter available here: https://www.perfectcircuitaudio.com/n...

Chimera available here: https://www.perfectcircuitaudio.com/w...

Make Noise available here: https://www.perfectcircuitaudio.com/m..."

---
Supporters of MATRIXSYNTH get %10 off at Perfect Circuit Audio!

Strymon Magneto self feedback patch demo

Published on Feb 22, 2018 brandon logic

"just a simple 8 step monophonic sequence going in and some manual tweaking"

ICE CAP ZONE// VolcaFM, Prophet-6, OB-6, Juno-106, TR-8

Published on Feb 22, 2018 MR TUNA Music

"❄️ ICECAP ZONE//
#Act1 is that #DXbass on the KORG #VolcaFM with some frozen chords and cries from Dave Smith Instruments #OB6, the dark swells of the Moog Music Inc. #Sub37, and my signature #steeldrums on the Roland #Juno106 as the tandem #TR8 drums send us into an unstoppable #spindash 🦔💥💥💥
Sonic The Hedgehog SEGA"

0-Coast Ambient: flickering lens distorts

Published on Feb 22, 2018 C Nich0lls

"shards of light, shadows of sadness

Analogue improvisation with Makenoise 0-Coast, Korg SQ-1, Strymon BigSky, Red Panda bitmap

Theme is a single take recording, no editing. 2 background elements were added post recording: high-pitched ‘chirps’ and a low ‘heartbeat’. Both elements derived from the original patch. The ‘heartbeat’ is self-patched.

SQ-1 has a series of pitches programmed across all 16 steps. Most pitches span more than one step and this interacts with the cycling Slope generator and Contour with variable decay on the 0-Coast to create the variety of note durations.

Makenoise 0-Coast
Image of patch at start of video

Patch is derived from 0-Coast:Timbre Space 01. Analogue distortion pedal changed for Red Panda bitmap, digital distortion

Square Wave to Balance In
Random out to Volt Math in
Volt math mult out to Slope Time in Contour Decay in
Slope set to Cycle
Contour out to Balance control in

Volt-math pot adjusted throughout the performance

Red Panda bitmap
Multiple parameters adjusted through performance

Strymon BigSky
Custom patch based on Choral algorithm"

ARTURIA MiniBrute 2 Synthesizer Tutorial - The Secret Of The 4 LFO's

Published on Feb 22, 2018 SYNTH ANATOMY

"The secret about the 4 LFO's in the MiniBrute 2 is solved. In this tutorial, I give you an overview how you can use the second oscillator and the AD envelope as an 3rd and 4th LFO.

►Become a Patreon: https://www.patreon.com/synthanatomy"

Reckless Experimentation Audio: Making a Eurorack Module

Published on Feb 22, 2018 Reckless Experimentation Audio LLC

1. Making a Eurorack Module Part One: Hardware Prototyping

"The first part in a series about how a module is made. From idea to a completed module. The first part will be how I prototype hardware. part two will be software development, and part 3 will be finished module fabrication and production."

2. Making a Eurorack Module Part Two: Demo, and Software

"The second part in a series about how a module is made. From idea to a completed module. This part is a demo of what I want the module to do and a explanation of the software driving it. Part 3 will be finished module fabrication and production."

3. Making a Eurorack Module Part Three: Manufacture and Assembly

The final part of the making a module series. This video covers a brief overview of the steps to turn the prototype built in the previous videos into a finished unit.