MATRIXSYNTH

Burnett and Twin Peaks - San Francisco (A drive with original music)

video upload by CatSynth TV

Merch: https://shop.catsynth.com
Ko-Fi: https://ko-fi.com/catsynth

"We pick up where we left off on last week's ride on O'Shaughnessy Boulveard and continue deep into the windy hilly residential streets of the Twin Peaks neighborhood. Burnett Avenue winds its way along the eastern side of the hills banked by idiosyncratic apartment buildings along the steep hillside - we then turn onto Twin Peeks Boulevard heading downward with views up to Sutro Tower and out towards the downtown skyline.

This area was developed later than other parts of San Francisco, so the streets and buildings were laid out to reflect the contour of the hillside rather than in opposition to it (as seen in the many classic straight roads with sharp grades in the northeastern part of the city).

Twin Peaks Boulevard south of the intersection with Burnett is closed to vehicle traffic but can be accessed via bicycle and foot to reach the summit of the hills.

Original music by Amanda Chaudhary, featuring the following instruments:
Arturia ARP 2600 V and Wurli V
Cherry Audio GX-80 and Stardust 201
Strymon Starlab
EastWest Stormdrum 3 and Ministry of Rock 2

If you haven't yet watched our video on O'Shaughnessy Blvd, we recommend checking it out here:" [posted here]

TRIPLE CROSS: How to create Circular/3D Panning effect with this Eurorack Stereo Cross-fader module

video upload by AJH Synth Official

"The new Triple Cross module from AJH Synth & Tone Science is a 3-channel stereo cross-fader/panner, fully voltage controlled, and able to be used for a plethora of different audio or CV duties. Here it is being used to achieve a dual VCA, stereo panning and cross-fading simultaneously, alternately raising and lowering the volume of 1 or 2 incoming audio signals, whilst moving them between left and right outputs. This can be used to create a 3D impression a sound that is moving in a circular motion.
This might more often be useful for creating momentary effects, and could be especially interesting for ambient drones, but here I demonstrate it using a sequencer, and eventually 2 melodic synth voices playing different patterns. An important element in this patch is the modulation - I use the Dual LFO +VCA module to create a quadrature triangle LFO, so I have 2 triangle waves running at the same speed, but at a 25%/1 quadrant difference in their duty cycle. Here it's achieved by using the square wave of one LFO to sync the other.
For more ideas of what the Triple Cross module can do check out this video:

The AJH SYNTH Eurorack range consists of high-end modules, all hand-made in the UK, most of which are based on classic, vintage designs, authentically recreating the circuitry of much sought-after analogue instruments and technologies of the past, whilst greatly expanding them, and bringing them to modern Eurorack levels of convenience, limitless flexibility, and reliability.

Check out the AJH Synth playlists for module 'User Guides', and 'Patch of The Week' videos, which will be either performances or 'how to' guides, detailing functions/methods, and a range of sounds, some familiar, some less so, containing a patch sheet at the end to show you how to construct it for yourself.

Video by @DreamsOfWires"

Like a Science Lab Overtaken by the Horrors of the Cosmos | Make Noise Spectraphon

video upload by HAINBACH

"Make Noise asked me to demo their new collaboration with Tom Erbe, the soundhack Spectraphon. To properly explore it I asked them if they could adapt their beautiful Tape and Microsound system around it. In this video I explore this "Spectral Sound System" on its own, with other synthesizers, samples and field recordings. I find it adds a unique texture to sound which reminds me of John Chowning's works, the alien worlds of early DSP."

Create Generative randomized Patch (Krell Patch) - CubuSynth

video upload by CubuSynth Modular

"Different ways to use random triggers and voltages with the CubuSynth modules which result in unexpected results and very interesting sounds.
This patch is fully stereo and is using the CubuSynth Engine (Dual VCO), the Dual CS-20 VCF and the Dual Vintage VCA.

https://cubusynth.com/collections/rea...
https://cubusynth.com/collections/eur...

00:00 Triggering from Exhaust (Engine Chaos voltage)
03:42 Triggering from Sample&Hold (VCLFO)
05:35 Krell patch (looping ADSR with Time CV)

Audio is recorded straight from the Dual Vintage VCA's output.
Reverb added after recording."

TTMC Touch Controlled Voltage Source Card

video upload by Tokyo Tape Music Center

via TTMC

Touch Controlled Voltage Source Card

Discrete Transistor Touch Controlled Voltage Source Inspired by Buchla 112,113

The circuit is the same as ttmc112.(little mod),The panel design is 113.

トランジスタだけ使用したTouch Controlです。

CV OUT A , B (about 0-10V)

Pressure (about 0-10V)

Pulses (about 10V)

Depth: 27mm

White panel behind.

Note.

The sound will shake when you touch the card.

Do at your own risk.

We are not responsible if the easel breaks.

Attention to the power capacity of the easel.

Easel pulse noise may be added.

Universal Audio UAFX Galaxy Sound Demo (no talking) with SH-01a and MEGAfm Synthesizer

video upload by Limbic Bits

▶ Book "Electronic Music Production": https://limbicbits.com/book-electroni...

0:00 FM Dub Stab
2:44 Mellow Lead
4:31 Metallic Percussion
5:43 Boarder Pad (SH-01a ...)
8:05 Flirr Lead
8:53 Drone Pad
10:49 Analog Dub Stab
13:45 Sequencer Lead

Duck Tales theme on 2xSIDs

video upload by MIDI IN

"I will be making a follow-up to this in which I explain how I started off with a .mid and made it work well with MIDISID. That will be the start of a series of videos to accompany chapters of the MIDISID manual, in this case 'playing a .mid and getting the most out of it'."

See the MIDI In label for more.

EML Electrocomp 500 v2 (prototype)

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

According to the listing:

"Here we have a one of a kind rarity that came from a synth museum. It has been serviced and verified by tech that this was in fact a prototype of a v2 of the Electrocomp 500 that was in the works when EML stopped manufacturing and selling synthesizers. There are 4 vco's, 2 filters, 2 envelopes and 2 VCA's I will be uploading some more photos as soon as I pick it up from my tech.

Being that this is a one of a kind piece I am not super eager to part with it. I may consider reasonable offers but this is definitely one for the collectors out there! Tech has gone over everything and everything is in working order."

CLICK FOR MORE »

Buchla Thunder SN 1072

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Here is a fully functioning Buchla Thunder. There are some dings in the paint and a few of the screws have superficial corrosion (pictured) but overall this thing is in great shape. Comes with compatible universal power supply."

CLICK FOR MORE »