Instruō Introduces glōc - Clock Generator and Processor

Overview video upload by Instruō

"Introducing glōc, a clock generator and processor. Capable of turning a single internal/external clock input into a stream of related clock sources. Predictable division/multiplication, complex trigger/gate sequences via probabilistic masking - or any combination of both across each of its 7 clock pulse outputs. Onboard dynamic phase alignment, smart tap tempo detection and locked vs live modes make glōc excellent for performative and generative temporal exploration!

• Tap tempo clock generator
• 1 clock input to 7 output Clock processor
• Manual or CV control over the spread of clock divisions/multiplications • Probabilistic “coin-toss” logic for random phrasing
• Probabilistic density masking for repeated phrasing
• Manual Pulse width control over Clock Pulse outputs
• Dedicated Clock Reset input
• Live and Lockable Clock output states
• Smart tempo follower and manual button
• Save and recall settings between power cycles"

00:00:00 Instruōduction
00:00:37 Feature Overview
00:01:29 What's to come in this video
00:02:05 glōc:
00:02:21 glōc: init state
00:03:05 glōc: external clocking
00:05:04 glōc: clock phase alignment
00:07:17 glōc: SPREAD
00:08:33 glōc: PWM
00:09:58 glōc: parallel clock outs
00:12:22 glōc: PROBABILITY
00:12:39 PROBABILITY: random phrasing density
00:13:49 PROBABILITY: repeating phrasing density
00:16:24 glōc: self patching
00:17:49 glōc: RESET
00:18:41 glōc: Lock programming
00:20:40 glōc: Lock state saving
00:21:33 Tonal percussion example

Musical & Fun Eurorack Clock Generation & Modulation // GLOC by Instruo
video upload by DivKid

"Here's a smart use of 4HP with clock generation and modulation/processing from Instruo with the new GLOC! Gloc (translates to clock from Scots Gaelic) has a smart tap tempo following clocking system built in for internal or external clocking and then provides multiplications and divisions with can be spread in time and then carved into with two types of probability control. One your typical random/coin toss with variable weightings or smart musical density masks that provide more repetitive musical rhythms. You can also program and lock output states (very simply I should add) so you can go wild modulating rhythms while keeping others constant ... there's a lot going on in an easy to use, small package."

00:00 Hello & patch previews
01:09 What is Gloc?
01:55 Feature run down
03:51 Customising the module
05:23 Interactive patterns for beats - exploring spread & probability with my first gloc patch
09:25 Playful rhythms for melody - interactive bass & synth voice layering
14:09 Sequencing without a sequencer - with decoupled pitch & gates
16:43 CV controlled probability masks as preset rhythms
19:59 Self patch feedback rhythms - dancing bass ratchets
22:59 Program mode - locked states and performing with them
26:22 PWM - gate length for envelopes
27:44 Gate length wonky rhythms with logic modules
29:11 Duelling Melodies - driving two sequencers musically

First Patch with First Contact (from SetonixSynth & Tidbit Audio)

video upload by Musical Miscellany

"I bought this gadget at Knobcon 2024 but I'm just now getting around to making my first patch with it. I took an aquarium pump and put it into a pilsner glass full of water, then integrated the output with a couple Eurorack oscillators. The result is surprisingly pleasing.

You can purchase the First Contact preamp here: https://www.setonixsynth.com/shop/p/f...

And the contact mic I used here: https://tidbitaudio.com/products/wate...

Buy Me a Coffee: https://buymeacoffee.com/musicalmisce...

Synth Foundations Pack. Track 5 Novation Circuit Tracks

video upload by Techtronix

"Out now for the @wearenovation Circuit Tracks
Only @isotonikstudios
Featuring
Featuring all the classic synth sounds and more

https://isotonikstudios.com/product/s..."

40 Years Last Christmas❄️Wham!☃️🌲

video upload by RetroSound

"(c)2007-24 by RetroSound
supported by UVI: http://bit.ly/retrosound-uvi

❤️ Support #RetroSound​ channel: https://retrosound.creator-spring.com

40 years Last Christmas by Wham! ❄️
from the album: Music from the Edge of Heaven (1984)
Written by George Michael

Featured the Roland Juno-106 (1984), the Roland SH-101 (1981) , the Yamaha Reface CP (Rhodes) and the PPG wave 2.2 (1982)

This cover song series contains my own recreations of my favourite songs from the last 50 years. The original music from which I take inspiration belong to their respective owners. I recreate tracks only for personal passion and to pay homage to these tracks.
My intention is not to create covers that sound exactly like the original (if you want to hear identical sounds, please listen the original). It's more of an inspiration with my sounds from the old synthesizers from the past and of course the great appreciation for the original performers and producers."

Dream Machine | Sonicware Liven Ambient Ø | New Set of 36 Songs

video upload by Sonic Cartography

"I haven’t had time to make videos for my channel for a while because I’ve been making Ambient Ø tutorials for the ‪@SONICWARE‬ channel’s Beginner’s Guide series. In the meantime, I’ve been accumulating lots of songs and song ideas on the synth. This is a set of most of them (some in abbreviated form), which I’m releasing all at once to sort of “clear the vault” and feel like I can start afresh with making new music. Unlike the previous collection I did, this one contains some actual ambient music—particularly the middle section. I'm not totally happy with how some of these turned out, but I'm trying to learn how to not let the perfect be the enemy of the good (enough), so I'm just going to publish this anyway... "

CLICK FOR MORE »

ORIGINAL ARP 2600 SN 26597 - Pro-Serviced w/Restoration by Phil Cirocco

Note: Auction links are affiliate links for which the site may be compensated.

via this listing

Additional Analog U.S Listings

Also on eBay

"This one is in good cosmetic condition and working 100%. This is for the synth only and not the keyboard. It has been professionally serviced and with a lot of restoration by Phil Cirocco of CMS. As some of you know, Phil is highly respected and is the premiere ARP specialist. This ARP 2600 is a V3.0 made on the 23rd week (June) of 1973. It has some unusual markings for V3. As you can see, it has the G-Clef sticker, but with the Tonus logo Silkscreen. It has the 15.5" panel which is correct for a V3.0, but has the squared speaker grille instead of the oval. All of this is cosmetic, however. It will be properly packaged when sold and will arrive in the condition as stated. Proof of the actual shipping cost will be provided if needed. This unit is listed as a USA sale only, but I am willing to ship to other countries. Not sold as-is!

Cosmetically - Nothing is mint, minty, super mint, etc., in my opinion, and this one is no exception. There are plenty of imperfections on this one as you can see, but the synth itself looks very good in my opinion. Please check out the photos. The handle was replaced with a new one, it has new Switchcraft washers, and all the jack nuts were ultrasonically cleaned.

Internally- Apart from any repairs (there were many), the unit has been disassembled and cleaned, all of the original sliders cleaned and re-lubed, the power supply has been rebuilt, it has a new Accutronics reverb tank, several encapsulated modules replaced, some switches replaced, several connectors cleaned & tightened, and the main out jacks replaced. There was a lot done to this unit so this will likely be updated."

CLICK FOR MORE »

Stereo Polivoks or Just Another Analog Filter? Elta Music PF-3 Review and Demo

video upload by Starsky Carr

"Does the Elta PF-3 Stereo Polivoks style filter live up to the claims? If you know this channel you know the answer... I wouldn't be reviewing it if I wasn't impressed by it. But how close does it get ... you decide."

0:00 Stereo LFO Demo
1:19 The Famous Polivoks Growl
4:08 Versus the Polivoks
11:26 Lil' Stereo Demo
11:45 What Else has it got?
15:32 Using the CV Inputs to Control the Cutoff
21:49 Rounding it all off

Now on iPad!: Motto Akemie (Akemie’s Taiko Eurorack) // Walkthrough & Review

video upload by Gavinski’s Tutorials

"This video is a walkthrough and review of the Motto Akemie plugin by ALM Busy Circuits. This came out for desktop some months ago, and was released as a standalone app and AUv3 plugin for iPad a few days ago, and is based on the highly-regarded Akemie's Taiko Eurorack module. I really like it, but some things about it frustrate me, and I discuss all this in the video. I hope you find it useful both in helping you decide whether this app is right for you, and in learning how the app works. Enjoy, and subscribe and hit the bell if you are interested in music production apps, I cover apps available on iPad, many of which are also available on desktop."

Retroaktiv Rhodes Chroma Polyphonic Aftertouch Demo

Note: Auction links are affiliate links for which the site may be compensated.
video upload by Retroaktiv Synthesizers

"Playing a Rhodes Chroma with the Retroaktiv Polyphonic Aftertouch Retrofit installed. For more info, visit www.retroaktivsynthesizers.com"

Found the above video from 2017 in the following listing.

via this listing

"It is in great shape, and the wood is nearly flawless. The metal and tolex are also in great shape. It's got the CC+ CPU board upgrade, MIDI and polyphponic aftertouch. The unit has had the following work done:

Luca Sasdelli Switching Power Supply installed. (Replaces original PSU, which was underpowered)

Retroaktiv Polyphonic Aftertouch installed. Can also transmit this via MIDI to control other devices that support poly aftertouch.

CC+ CPU upgrade installed, allowing for CC control of parameters, extra memory, and more.

Other information:

One of the segments is out on the large 2-digit segment display (Which shows the current program selected). One segment is out on the 8-character mini-7-segment screen. Both of these segments are so minor that I have never been affected by them. One of the voice cards is currently coming up with an error. I am willing to replace the card before shipping the instrument. If I haven't played the Chroma for a month, certain keys will need to be exercised a few times in order to work. This is due to the leaf switches used on these. They're the same as the ones on the K250. I have never seen a keyboard that uses these that did not exhibit this behavior.

There is s small dent in the front panel near the Chroma logo. Hardly noticeable.

Voice 6 is currently throwing an error code."

CLICK FOR MORE »

Portabellabz/SaModular 208p Buchla Music Easel Clone

Note: Auction links are affiliate links for which the site may be compensated.
video upload by no talking

"music easel - first patch

208p w/ Portabellabz ToolBox"



via this listing

"Hand-Built Buchla Easel by Constantin (Portabellabz)

This setup was meticulously hand-built by Constantin at Portabellabz, with all components in perfect working order.

Price: $8,000 USD (equal to my original investment). I’m open to reasonable offers.
Location: Portland, OR. Local transactions are preferred, but I’m willing to ship if necessary.

Feel free to ask any questions—I’ll do my best to provide detailed answers.

Modifications and Features

208p Module (with Blue PCBs)

Flat red LEDs
Tinijax connectors
1.2V/oct input
On-off-on switch for CO CV
Reverb mix CV input (replacing the rightmost pressure socket with a black banana socket)
Dedicated LPG outputs (replacing panel signal out tinijax sockets)
Infinite sustain functionality
Noise generator (similar to the 208c; accessible via LPG2 when the routing switch is in the top position and the preamp is unpatched)
Enclosure Features

SAmodular 2x4U enclosure
Dual 1/4" audio output jacks
Gate minijack input with Buchla pulse generator
1V/oct CV minijack input
Additional Components

Portabellabz ToolBox: Includes slew limiter
Roland Klinkenberg Sequencer Aux Expander: Includes Mod Expander
Custom Hard Case: Custom made by Road Cases USA
Rare SAmodular Keyboard and Case

The 218 keyboard and case are from SAmodular, with specific modifications by Constantin to ensure peak functionality. Note that the keyboard is no longer in production, making this setup particularly unique and valuable.

This is a beautifully customized Buchla Easel, built and modified by one of the most respected names in the field. Don't miss this opportunity to own a one-of-a-kind instrument."

CLICK FOR MORE »