Audrey II Horrorscape Synth // First Encounter

video upload by Genshi Media Group

"::| WARNING! EXTREME FREQUENCIES AHEAD! USE CAUTION |::

A first encounter with the Audrey II Horrorscape Synthesizer from ‪@SynthuxAcademy‬
yes, there are many other videos of this extremely basic, yet very epic synth, but I got one for my horror/sci-fi film scoring work, and thought you all might like to hear how it sounds... if you haven't already. My next video with it will try to incorporate other instruments in a more film score style."

Intellijel Metropolix Backpack

video upload by Intellijel

"The Metropolix Backpack adds a 10-pin Intellijel Case MIDI connector to the rear of Metropolix, allowing Metropolix to interface directly with the MIDI and USB ports on Intellijel Performance and Palette cases.

When using the Metropolix Backpack, you can connect Metropolix directly to other MIDI hardware or your Computer/DAW via your Intellijel Case Jacks.

This accessory requires:
• Intellijel Metropolix
• Intellijel Performance or Palette Case

Intellijel Case Compatibility:
• Performance Case 7U x 104HP
(Full Size 5-Pin MIDI In/Out/Thru + USB-MIDI)
• Performance Case 7U x 84HP
(Full Size 5-Pin MIDI In/Out/Thru + USB-MIDI)
• Palette Case 4U x 104HP
(TRS MIDI In/Out + USB-MIDI)
• Palette Case 4U x 62HP
(TRS MIDI In + USB-MIDI, Note: no TRS Out)"

"Sequence via MIDI from your Eurorack system

The Metropolix Backpack adds a 10-pin header to the back of Metropolix for connecting to the Intellijel 10-pin header* on all of the Intellijel Cases.

Intellijel 4U Palette Cases — TRS MIDI IN and OUT**, USB MIDI
Intellijel 7U Performance Cases — 5-Pin MIDI In, Out and Thru, USB MIDI

* Please note—the Intellijel case MIDI Jacks can only be connected to a single module: MIDI 1U, Metropolix w/ Backpack, μMIDI 1U (legacy).

** MIDI TRS OUT not available on the 62hp 4U Palette.

Metropolix w/ MIDI

MIDI on Metropolix does not interfere with classic CV/GATE modulate usage, it plays alongside it. Sequence your favourite modules, hardware synths, and software plugins all at the same time.

MIDI Clock In and Out — Integrate an external MIDI Clock Sync from other hardware or your DAW, or sync everything else with the Metropolix Clock and modulate the BPM.

MIDI Output from the iconic Metropolix Sequencer—

Output MIDI Notes and CC Modulation from both Tracks

Output CC Modulation from 8 Mod Lanes.

Deep support for configuring Slide (Glide/Portamento) for any synth.

The Backpack offers the same MIDI functionality as Metropolix Solo , but using the Jacks on your Intellijel Case. [see Intellijel Metropolix Solo - Desktop Sequencer with MIDI]

Tucked away

The Backpack is mounted directly onto the power header of Metropolix and secured with a screw.

The USB port is extended and connected with an included cable.


Full Installation instructions in covered in the updated Metropolix 1.5 Manual.

NOTE: With the Backpack installed, you can not connect the GX expander"

Check with dealers on the right for availability.

NerdSEQ Firmware V3.0 adds Video Synthesis!

video upload by XOR Electronics

"Oh yes! Another milestone coming to the NerdSEQ ecosystem: Video Synthesis!!
Again a massive update with the upcoming firmware V3.0!
The well known video expander gets shader functionality with plenty of integrated modulators to make your music and visual sequencing one!
The release date will be at the begin of June. Stay tuned for more info!
Come over to my booth at #superbooth next week and check it out!! Booth Z235
NerdSEQ - Not just a Tracker!

Patch & Play: Sequential Circuits Prophet-5 - Episode 2

video upload by William Cas

"In this episode of Patch & Play, William Cas explores the Sequential Circuits Prophet-5, a legendary five-voice analog polyphonic synthesizer known for its warm sound and expanded patch memory.

Patch & Play is hosted by William Cas, featuring a new setup each series of episodes. The experience itself unfolds as a meditative dialogue with the environment, exploring its unique alchemy of sounds.

Produced by Nolan Feldpausch
IG: @noliefeldpausch"

Part 1 here

Groove Synthesis Teases Something New For SUPERBOOTH25

via Groove Synthesis

"Join us at @superbooth_berlin (May 8-10)! Meet founder Bob Coover, get hands-on with the 3rd Wave keyboard and desktop module, and geek out with the Groove Synthesis team at booth 0246.

We're passionate about building instruments that inspire creativity and push sonic boundaries. Come experience sound that is inspiring and in the “groove”.

Who knows? Maybe you’ll even see something brand new from us in Berlin…"

Exploring the Geddy Lee Minimoog Model D!

video upload by moogfoundation

"Enter our fundraising raffle to win this gorgeous limited edition Geddy Lee Minimoog here: https://bit.ly/GeddyLeeMinimoog2025

This brand new synth comes with the following:

🎛 Numbered Certificate of Authenticity, personally hand-signed by Geddy Lee

🎹 Satin red finish exclusive to this edition

🎛 Hot-rodded VCA circuit for extra sonic punch

🎹 Custom 'Starman' badge on the front and matching sticker on the rear

🎛 Limited-edition 10" red translucent vinyl featuring Rush’s "Xanadu" and "Jacob’s Ladder"

🎹 Exclusive Geddy Lee Minimoog Model D poster

The raffle runs through May 19th and is open internationally."
---
I spy a packrat in the video. ;) / umop

Oberheim TEO-5 Synthesizer and Roland P6 (1ST TRY)

video upload by James Dyson

Minimal Electronic w/ LOSSY, Music Easel, Prophet-10 | Sunlit Leaves 2025-04-29 by atnr

video upload by atnr

"A piece created with the ‪@SequentialLLC‬ Prophet-10, ‪@MoogSynthesizers‬ Moog One, Grandmother, and ‪@buchlausa‬ Music Easel—minimal music built around arpeggios.

All parts are driven by MIDI in Ableton Live.

Prophet-10: Plays the main arpeggio, processed with ‪@strymon‬ blueSky for reverb.

Music Easel: Also plays a primary arpeggio, but heavily processed with ‪@ChaseBlissAudio‬ LOSSY.

Grandmother: Handles the bass line.

Moog One: Provides the harmonic layer.

I record while tweaking parameters on each synth."

Your Modular Synthesizer's Best Friend Is The Digitakt II

video upload by EZBOT

"I can't imagine using my modular without having a sampler present to capture the unique and one-time sounds you get from your modular synthesizer. My go-to sampler for everything is the Digitakt II, if not that, than the Octatrack or M8 Tracker. Today we will dive into the workflow of writing music and sampling a eurorack system built around 2 voices with lots of effects."

EZBOT resources available at https://www.patreon.com/ezbot and https://www.modbang.com
Get 10% Modbang cables with code: EZBOT23
Get 10% off your first Modbang Riser with code: RISER23

Futureretro SWYNX Available in Extremely Limited Quantities & Other Updates / Tariff News

via Futureretro

Futureretro Swynx available in super limited quantities ONLY through our online store.

Using recently found old stock parts, Futureretro has built and is offering the long out of production SWYNX in super limited quantities (less than 10 units available). These use the same chassis, circuit boards, and parts as the original run (knobs are slightly different) and serves as a test for a possible re-introduction of the unit into the Futureretro catalogue in the near future.

The Swynx is a sync box that converts incoming MIDI messages to MIDI clock, DIN sync, CR-78 clock, and Analog clocks. In addition, the Swynx provides the ability to swing the timing of all these clock outputs and select different time signatures in real-time with the front panel controls, and can also act as a CR-78 pattern programmer. After you try it in your setup, you will realize just what you've been missing. For instance, many DIN sync devices do not provide a built-in swing function. And many MIDI sequencers and drum machines suffer from poor implementation of swing, preventing changes to be made live, or only providing swing for 4/4 patterns. Quite a few MIDI sequencers don't offer any swing function, including our own 777 and Mobius products. Now you can apply swing to any MIDI sequencer, and select new time signatures as well Need to sync your analog sequencer or arpeggiator with MIDI gear? No problem! Not only can you do so, but now you can swing the timing of those devices as well. You can even use the analog clock output to Gate the envelopes in a synthesizer. The clock duty cycle is 50% of a note duration. If you are a Roland CR-78 owner, you may have realized finding a WS-1 or TS-1 to program the CR-78 is next to impossible. The Swynx can replicate the programming capabilities of these units, plus provide sync to MIDI, and realtime swing adjustment. The ability to add swing to the CR-78's preset patterns alone will breathe new life into this old friend. The Swing value is accurate to 0.5% providing much more control resolution than is typically found in sequencers and drum machines. The Swynx provides 12 different time signatures to choose from. Some time signatures are duplicate, but provide different shuffle patterns for that time signature. Time signatures include 9/8, 7/8, 6/8, 5/8, 2/4, 4/4, 8/4, 3/4, and 6/4. The Swynx is all about making the gear you have sound better!

Swynx Features
Converts MIDI messages to MIDI clock, DIN sync, CR-78 clock, and analog clock
Can be used as a CR-78 pattern programmer
Control over the swing amount
Swing - 50% - 75% (0.5% resolution)
Time-signatures include 9/8, 7/8, 6/8, 5/8, 2/4, 4/4, 8/4, 3/4, and 6/4

No more NEW Vectra units will be sent out to stores after this month.
We have a very small order to fill with one US Store that will be filled by the end of May. After that, we will be out of Vectra parts and do not plan on restocking the product. The build time and cost is too excessive for us to continue this unique product. If you are wanting a Vectra and have not yet ordered a unit, the time to get them is now. Please check with your favorite stores for availability.

The 777
Many have asked, many are waiting and wanting to know details. ALL we can say at this point is that this product has been sent back to engineering. The 777 project has been a major undertaking and while close, seemingly minor issues have been exaggerated by parts availability. We continue to work towards this goal but no further information is available.

Furthermore, NO NEW manufacturing can be put in place until tariff issues are worked out.