Electra One - Generative Sequencer preset

video upload by Electra One MIDI Controller

"A demo of Electra One MIDI controller running a generative sequencer preset. The preset is greatly inspired by the Zoa sequencer IOS app.

Roland MKS-50, D550, and Kawai K5000 play the sequencer voices. Sound of MKS-50 is tweaked while the sequencer is running."

New life for old synths: Kawai K4(r) as Wavestation with Electra One & Atari ST Emulator, Librarian

video upload by Jürgen Moßgraber

"While everybody is talking new gear this week, I go retro :-)
Unbelievable what you can do with these old machines!

0:00 Introduction
2:10 1st Demo of Electra One Template
2:50 Update the Firmware
3:58 Patches for K4
4:25 2nd Electra One Template Demo: Wave switching!
9:26 Installation of Atari ST emulator
15:42 Atari ST Librarian / Editor for Kawai K4/K4r

Firmware 1.4:
https://monotanz.de/product/kawai-k4r...
https://stevereaver.com/k4r-firmware-..."

Electra v2.9 by Tone²| Custom presets, Pads, etc

video upload by Chris Sneider

"The most stable version of Electra so far and the one with the best final sound, watch this video and compare with version 3 that goes out of tune and does weird and unexpected things with the sound, V.2.9 is the one I recommend until Markus makes the necessary adjustments in version 3."

HOHNER Electra Melodica 1966-1967 * RARE monophonic synth *

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

This is only the 2nd one to be featured on the site; the 1st one being here.

"Rare Hohner Electra Melodica which is a monophonic windsynthesizer produced by Hohner in 1966-67. Obviously this instrument was so far ahead of its time that they only produced 500 pieces until it was discontinued.

The melodica has 6 sounds to choose from - clarinet (1 octave lower than the rest), brass, strings, oboe/bassoon, flute, saxophone, there are also three "formants" for the wau-wau effect that you can choose from and manipulate with the pushbutton on the left side of the instrument. The melodica has a vibrato that can be altered in amplitude and frequency and two pots for finetune and coarsetune. The octaveswitch allows to choose between five octaveranges. The manual has 3 octaves, using the octave switches you can play notes from "f" below the lowest note on a piano to the "e" above the highest c on the piano.

The power supply has new fresh electrolytic caps and a bulb has been changed on the inside of the instrument. The melodica has also been tuned properly.

The package contains the original power supply, the power cord, a connection cable from power supply to the melodica (same as the 'MIDI'-cables we use today), 1x3-pole-DIN/3-pole-DIN and 1x3-pole-Din/jack cable to connect the melodica via the power supply to the amp. It also contains two mouthpieces.

The original case has suffered a little bit throughout the years and the melodica has a crack on the downside which has been glued (check pictures)."

CLICK FOR MORE »

Electra One controller - Supported now in Bitwig Studio and Cockos Reaper

video upload by Jürgen Moßgraber

"This tutorial shows the usage of the Electra One controller from the company with the same name in Bitwig Studio (Reaper works the same).

Get DrivenByMoss from https://mossgrabers.de

Electra One: https://electra.one
Firmware 3.0.5 is public. No need to refer to the Beta site anymore.

Check out my music project MOSSIFIER: https://mossifier.de"

Reminder: SoundMiT in Turin on 12/13 November 2022 (English)

video upload by SOUNDMIT

"The largest event in southern Europe for synthesizers and new music technologies. 2 days full of activities with international brands, workshops, talks and concerts.

SOUNDMIT 2022
November 12/13, at: Toolbox, via Montefeltro 2, Torino.
BUY TICKETS ONLINE: http://sndmt.link/tickets

CONFIRMED EXHIBITORS:
ARDUINO - ARTINOISE - AS29 STUDIO MONITOR - ATVOPROJECT - AUDIO DJ - AUDIOFACTORY - AUDIO MODELING – X AUDIO SYSTEMS - CLATTERS MACHINES - GMLAB - DREADBOX - ELECTRA ONE - ERICA SYNTHS - EUTERPE SYNTHESIZER LABORATORIES - FASELUNARE - FC PRO AUDIO - FINEGEAR - HERBS & STONES - JOMOX - JORANALOGUE - MIDI ASSOCIATION - MODOR MUSIC - MRG SYNTHESIZERS - MUSE OVATIONS - MUSEO DEL SINTETIZZATORE MARCHIGIANO E ITALIANO - MUSICLAB - OFFICINA DEL MALISTA - ONDOMO -PULSAR AUDIO - ROBKOO - SCHMIDTH SYNTHESIZERS - SOUND MACHINES - SYNTHFEST FRANCE - SYNTH PANELS DESIGNER - SYNTHR - TEKNOSIGN - THERESYN - VECTOR SYNTH - VERMONA - XODES - ZIRANTE ...and more to be confirmed!"

Soundmit 2022 - Exhibit FOR FREE at the next Synthfest France

via SoundMiT

SOUNDMIT and SYNTHFEST FRANCE togheter under the sign of EMEA!

Today we have a news to share with all exhibitors and future exhibitors of SOUNDMIT 2022!

For some years now, SOUNDMIT has been twinned with SYNTHFEST FRANCE, the Nante's synth event which, like ours, is held every year.

In 2018 we created EMEA - Electronic Music Event Association. A consortium created to guarantee quality events to the public and companies.

At the same time, EMEA allows the sharing of experiences and knowledge between events and promote mutual support.

Thanks to this collaboration, Soundmit can offers to ALL THE COMPANIES present at Soundmit 2022 that never take part in the SFF, the opportunity to participate FREE OF CHARGE in the next edition of SYNTHFEST FRANCE in June 2023.

SYNTFEST FRANCE staff will be present at SOUNDMIT 2022 in the legendary VINTAGE KITCHEN with a selection of collectible synthesizers including: PPG Wave 2.3, Ensoniq SD1, MFB Dominion 1, OSCar and Pro One.

CONFIRMED EXHIBITORS @ SOUNDMIT 2022

AUDIO DJ - AUDIOMODELING - CLATTERS MACHINES - GMLAB - DREADBOX - ELECTRA ONE - ERICA SYNTH - FASELUNARE - FC AUDIO - HERBS & STONES - JOMOX - JORANALOGUE - MODOR MUSIC - OFFICINA DEL MALISTA - SCHMIDT SYNTHESIZERS - TEKNOSIGN - VECTOR SYNTH - VERMONA - WAVELICKER - X-AUDIO SYSTEM - XODES ... and many on the way!

If you'd like to exhibit, email helpdesk@soundmit.com.

SOUNDMIT 2022 Set for 12/13 of November - Early Bird Sign-Up Ends Tomorrow

via SOUNDMIT

SOUNDMIT 2022 EARLY BIRD ENDS TOMORROW!

But registrations remain open!

You already know the basic information, the twelfth edition of SOUNDMIT will be held in Turin on 12/13 November 2022.

So, let's move on to the latest news!


We are very happy to announce the renovate partnership with the Audio Developer Conference, the most important event dedicated to the world of audio research.

The next ADC will be held in London and Online shortly after the Soundmit from November 14-16.

CALL FOR SPEAKERS is open and we invite you to participate by going to this link https://audio.dev

We are in good company, together with JUCE, iLok, supertone, cppcon, raftermarsh, the Web Audio Conference, Abbey Road, IMSTA, The MIDI Association, Audio Engineering Society and many more!

This collaboration will bring a wide visibility to the Soundmit which will be reflected in our exhibitors and sponsors

If you are a software / hardware developer or if you have an innovative idea, take it to Soundmit! Participate as an exhibitor, contact us at helpdesk@soundmit.com

If you want to give more visibility to your brand, you can become a sponsor of the Soundmit, send an email to info@soundmit.com

The second news today concerns the exhibitors who join the Soundmit 2022 rooster: Clatters Machines, Officina del Malista, Faselunare, Erica Synth, Schmidt Synthesizers, Joranalogue, Vector Synth, GMLab (Crumar), Electra.One, X-Audio ( BeatFM), FC Pro Audio, Audio DJ, Jomox, XODES, Audio Modeling, EnjoyLab and many more to come!

We have musical instruments for all tastes: effects, modular, analog, digital, keyboard, FX Pedals, mega keyboard and collector items! Apps and Software and DIY! What are you waiting for?

Take advantage of the Early Bird discount and bring YOUR BRAND to Italy at SOUNDMIT!"

Orac's Krell - demo of a new way to use Orac

video upload by TheTechnobear

"Over the last few months Ive been collaborating with Electra One.

They have recently made their firmware open source, and I wanted to write a custom firmware for Orac to allow a new way to interact with Orac running on any platform.

This video is of the patch I made for their booth at this years Superbooth (2021) , showing Orac running on a Terminal Tedium.

This firmware will also work on the rPI, Organelle and other Orac platforms.

The patch is a generative patch based on the 'Krell Patch', which uses continually looping envelopes that change randomly over time.
these envelopes are used for many aspects, including note generator, amplitude and also also various parameters affecting timbre and filtering.

This was implemented by creating new Orac modules that contained these new 'krell' envelopes.

a fun patch to just let do its own thing, and tweak as you go along.

(I also had the patch running on the Organelle-M at Superbooth)"

Additional Orac posts

Additional Electra One posts

Jamuary #28 - Together we rock (ft. VCVRack, Eurorack,Soundplane)

video by TheTechnobear

"Today was all about trying to bring everything together....

The idea is simple, using the power of the computer (my little mac mini m1) to use the wonderful vcvrack, yet have it behave like an instrument with full hands on control.

Ive used vcvrack a bit in the past, but never really tried to integrate it fully..
the basics of the patch are simple.
- a couple of voices using instruo and vult oscillators and filters
- pianoteq (vst host) using a vult filter
- aalto (vst host)
- a mixer with a couple of sends to 2 vahalla vst reverbs (vst host)
- audio recorder to record the output
- midi to cv, to connect to hardware

the the bit thats Ive not done before... using midi mapping to map a controller.

on the hardware side.
the aim here was about hands on control...

the pyramid is used as the main sequencer and clock

the hermod is really the brains.
its sending the cv to the eurorack, midi to vcvrack, and its also taking cv/gate from the USTA to sequence vcvrack voices.

usta is a nice hands-on sequencer, quite different from the pyramid, more like an analog sequencer.

electra one [additional posts], lovely controller with encoders and is touch screen too - its easy to customise, so here I created a quick patch that controls vcvrack, things like levels, fx, and filters. once setup, I use midi map in vcvrack to assign controls.

the soiundplane again comes into play as the main playing surface :)

its was quite a lot of setup, but really just because it was the first time... so I had to decide how it was best to connect things, what role they would play.

its the first time my little mac mini struggle a little bit.
in fairness, it was fine whilst I was playing...no audio glitches at all.

but of course, as soon as I turned on the camera issues started appearing :)
the issue is I also had to run OBS to record the webcam, and quicktime to do a screen capture of vcvrack... that seem to just take it a bit over the top.

... which was. a bit frustrating, as I was getting tired by this point, and just wanted to finish... but I got there.

I might give it another go tommorow, now its all setup - so I can focus more on the music side , rather than cables and midi ;)


hope you enjoy

tech note: I should say VCVRack, plugins , OBS are all Rosetta , so I think we can expect them to improve. also honestly, Id have not even tried this on my old mac - its also possible the issue was related to usb traffic, given I have audio interface, webcam, monitor, soundplane, hermod, electra one ... alll sending a lot of data over usb ;)"

Electra One on-screen touch control

Published on Jan 7, 2020 Electra One MIDI Controller

"Firmware 0.9.10 brings the first version of on-screen touch controls for both faders and lists"

Electra One MIDI Controller

Electra One MIDI Controller Demos with the Yamaha DX7 & Roland MKS-50

Demonstration of the program change with DX7 Published on Oct 30, 2019 Electra One MIDI Controller

"Electra does not only send the sysex messages to DX7, it also reacts to program changes and retrieves the current patch parameters to keep in sync."

Reading patches from Roland MKS 50

Published on Oct 30, 2019 Electra One MIDI Controller

"This video show how Electra reads data from Roland MKS-50 after the patch is changed on the synth panel."

Electra One with SE Code Omega 8

Published on Sep 9, 2019 Electra One MIDI Controller

"Electra One in full control of Studio Electronics Omega 8 and in hands of one of our early testers - Bohdan from http://www.bodyia.cz/. For more information visit https://www.electra.one/"

Electra One with DX7

Published on Sep 8, 2019 Electra One MIDI Controller

"Electra One in control of Yamaha DX7. For more information and pre-orders visit https://www.electra.one/

The video demonstrates modifying a patch that Electra downloaded fom TX7 tone generator. Operator frequencies and envelopes are being modified in real time. The sequence is run by Roland TB 3 connected to the USB host port of Electra."

Making of the Electra One MIDI Controller

Published on Sep 1, 2019 Electra One MIDI Controller

"A short video about how first Electra's were made."

Electra One

electra.one with a soft synth

Published on Aug 25, 2019 Martin Pavlas

"A frequent question is if electra.one MIDI controller will work with soft synths and VSTs. Here is a short demo of using MIDI CC with Absynth 5. For more information visit https://www.electra.one/

Electra.one is connected to Mac with a USB cable and ESI KeyControl 25 is connected to Electra's USB host port.

Three MIDI CCs are used to control Absynth 5's oscillator frequency, filter cutoff and resonance."

electra.one midi controller ∙ testing with Rhodes Chroma

Published on Aug 17, 2019 Martin Pavlas

"https://www.electra.one/
MIDI controller • USB host • MIDI USB interface
In this video: electra.one in full control of Rhodes Chroma and acting as a USB host for Roland TB3 sequencer and Arturia KeyLab 61. All MIDI messages are fully routed with electra.one. Electra Editor running on computer reflects activity performed on hardware controller and can be used to edit controller presets. All midi data are forwarded to computer bia USB MIDI."

First production ready Electra.one

Published on Jun 8, 2019 Martin Pavlas

"After a bit of struggling with manufacturing parts in China all new and improved electra.one is ready! More info on www.electra.one.

Following has been added:
- hardware buttons
- storage for patches
- setup and midi monitoring page
- brushed aluminium case with grey and black finish
- gorilla glass on the LCD"

See this post for additional details.

New Electra 4 x 4 Next generation Touch MIDI Controller

Demos with a Rhodes Chroma & TB3 Published on Jan 24, 2019 Martin Pavlas


A new programmable MIDI USB controller from Martin Pavlas of https://www.electrasid.com

"Electra is a fully programmable MIDI controller for studio or live rig equipment. The controller provides real-time visual feedback for up to 36 MIDI controls at once. Features high resolution 360 degree pots with touch sensing and a capacitive touch display. Extended connectivity offers USB MIDI device and USB Host interfaces as well as four DIN5 MIDI In / Out ports.

The driving idea behind the project was to make programming of Rhodes Chroma synthesizer easier. Chroma has got almost one hundred sounds parameters and editing them without seeing other relevant parameters at the same time affected the creative part of the process. Over the time, Electra has become an all-purpose MIDI controller with extensive USB MIDI interface and host integration.

The main concept of Electra MIDI controller is so-called Control. The control represents a MIDI parameter, its value, and assignment to a MIDI port and channel. An example can be, say, Cutoff frequency of Rhodes Chroma connected to MIDI port 1 channel 2.

A control visualizes value of an assigned parameter as well as it can modify the value either turning corresponding pot or with a touch gesture on the display. Watch the demo of control manipulation on youtube.

There is a number of control types: faders, dials, switches, buttons, and selection lists. All controls can trigger CC, SysEx, or NRPN MIDI message.

Controls are organized on Pages. A page is a set of controls that are displayed on the display at the same time. Pages may group controls by their meaning (Oscillator, Filter, etc) or can be collections of controls that should be close together for a performance purposes (Filter cutoffs and modulations of several connected synthesizers).

A set of pages is called a Preset. A preset is a top level configuration of Electra and consists all information about controls, pages, connected instruments, and MIDI routing.

Presets can be created with an Electra Controller Editor application and users can easily switch between them.

Crumar Multiman String Synthesizer Orchestrator

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Crumar Multiman string synthesizer recently serviced, in 100% functional condition. This is the early version of the Crumar Orchestrator and has the same features minus the string brightness slider and volume/brass pedal connections. The brass section has a true voltage controlled filter similar to the moog design, the string section is very lush and compared to the ARP solina and the piano/clavichord is similar to the RMI electra piano. All very vintage and usable sounds packed into one machine. The faders have been cleaned and the entire unit was re-capped to provide stability for years to come. Cosmetically, the metal panel has scratches and scuffs, but the physical integrity of the instrument is very strong; it's built like a tank. Comes with the original lid."

CLICK FOR MORE »