MATRIXSYNTH


Saturday, October 31, 2015

Roland Boutique JP-08 JU-06 JX-03 and Roland AIRA range - Demo 01 & 02



Published on Oct 31, 2015 space travel made easy

http://www.roland.com/aira
http://www.rolandus.com/promos/roland_boutique/

"Got a chance to play with the Boutique range from Roland this afternoon along with all Aira range. The Roland JP-08, Roland JU-06 and the JX-03 are all really capable little synths and great remakes of the old classics. Could not believe the sound coming through the studio monitors from these little boxes.

The Roland Boutique range was plugged into the Roland MX-1 along with all the other recent Roland Aira gear. The Roland TR-8 was providing the drums. The MX-1 has some awesome effects (and beat effects) that can be thrown into the mix either on the output or on individual channels. The Roland TB-3 is more than capable of beautiful basslines reminiscent of the old Roland TB-303.

We got a little taste of the Aira Modular pieces. Didn't get to hear the System-1m but had sends from the Roland MX-1 going through the programmable effects units the Roland Bitrazer, Roland Demora, Roland Scooper and the Roland Torcido.

Thanks to Dan from Roland for showing us everything and putting up with a number of synths being played with at the same time. His poor ears.

This video was filmed in my iPhone so apologies for the poor quality audio but it gives you a good idea of what these new Boutique boxes are capable of.

I will post more shorter videos on my Instagram account. Search for stme.music on Instagram.

Thoroughly recommend the Roland Boutique range. Well made and sound better than you would ever believe."

Electrocomp EML-500 Vintage Analog Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Check out the curved side panels on these.

"This Synth has been disassembled, cleaned and professionally restored by Jeff Blenkinsopp of The Analog Lab. The keyboard bushings have also been replaced. Cosmetically it looks good, with some scratches and wear on the wooden case and a slight yellowing on some of the keys, please look at the pictures. These models are hard to come by and have a unique sound., This one is in 100% working condition and ready to be played. It also comes with a cover, manual and two books on Synths, as in the picture.The synth is being sold as is with no warranty. The item will be professionally packed and fully insured when shipped."

Korg MONO / POLY Vintage Analog Synthesizer SN 371557

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Futureretro Future Retro 777 SN FR3D71499510

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Korg Rhythm 55 SN 258230

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Korg Rhythm 55, KR-55, Original 1979 Analog Vintage Drum Machine."

Meet The Alright Chronoblob




Note this is the first Alright post on the site. They've only been all good up to this point. Bahah. ;)

via Alright Devices (via Papernoise):

"Chronoblob is a digital delay module!

Unlike other delays, Chronoblob can sync to an external clock. Patch one to the SYNC input and choose a multiplier/divider for rhythmic delays. Or don't do that and just sweep TIME for traditional, continuously variable delay times. Do you!

Chronoblob's OTA-based analog FDBK circuit is CV-controllable and can be pushed up to and beyond unity for near-infinite decay or harsh saturating feedback. The guts of the feedback loop are made available to you, the discerning modular enthusiast, via the SEND and RETURN jacks. Patch in a lowpass filter for smooth, shadowy echoes, or cop two blobs and get yr pingpong on! Use the equal-power crossfading dry/wet control to dial in your mix.

Chronoblob's mode switch selects its response to delay time changes. Throw the switch up to select resampling mode and get sweeping pitch effects reminiscent of a tape loop or BBD. With the switch down, Chronoblob smoothly crossfades between delay taps for quicker, more subtle changes. Patch in a clock and sequence the TIME CV input in this mode for rhythmic ratcheting delays!

Chronoblob also uniquely features a HOLD switch and gate input to freeze the audio buffer. Punch that shit and modulate TIME for mad stutter and glitch!


Specifications:
Audio: 16bit, 48kHz
Delay: 5ms to 500ms in SHORT mode, 50ms to 2.73s in LONG mode
Power: +12V / 90mA, -12V / 30mA
Width: 10HP
Depth: 30mm (including power connector)"

Details on the New Audio Damage Neuron Eurorack Drum Module are Up


via Audio Damage

"Neuron is an FM-based all-in-one drum voice module suitable for all types of electronic music. From big Autechre-style FM hits to huge digital hardcore kicks to tight x0x snare drums, Neuron can make a broad range of percussion sounds with ease.

Starting with super fast envelopes internally curved for percussion sounds, we add a carrier wave that is a single-cycle sample straight from the PCB of a 909's kick oscillator. We then add pure sine modulation, analog-modelled soft saturation, digital distortion, and a true random-number-generator for white noise.

The result is a drum module that is both easy to use and incredibly versatile. Watch the overview video below to get an idea of what Neuron sounds like.

» Neuron is a DSP-based module that runs at 48kHz sample rate and 24 bit depth, via a high quality Cirrus-Logic codec.

» Two-operator FM synth voice tuned for percussion use.

» Carrier waveform is a single-cycle sample of a 909 kick's main oscillator, taken from the board of a real 909 via a studio-grade Mytek A/D convertor. Tunable from 20Hz to 1kHz.

» Modulator waveform is a pure sine wave, tunable from 5Hz to 1kHz.

» Two ultra-fast percussion-curved internal envelopes for pitch mod and VCA.

» Soft saturation/overdrive and distortion control for hardcore sounds.

» Internal noise generator for snare and cymbal sounds.

» Trigger input that fires the internal envelopes on a 1V edge detection. Can be triggered up to low audio rates. (Approx. 60Hz.)

» Accent and Choke inputs allow further time-based control over the output.

» Every control has a CV input that accepts +/-5V. Panel controls are sampled at low audio rates (approximately 35Hz), and have further internal lag processing for smooth parameter changes.

» USB port (on the backplane) for easy firmware updates.

» High-quality 100% Made In The USA construction, including panel-bolted 100,000-cycle BI potentiometers and custom stamped Rogan knobs.

» Power draw is 50ma from the +12V rail and 9ma from the -12V rail. This module has an on-board regulator and does not require +5V. Module width is 12HP. Module depth is 25mm.

» Neuron, like all Audio Damage hardware products, includes our lifetime unconditional warranty."

Stand Alone Hardware Coming from Audio Damage


via Analog Industries (Chris Randall of Audio Damage's blog):

"Next up, it's been no particular secret that we're working on non-Euro hardware. This turned out to be surprisingly difficult. Euro has a pretty set-in-stone standard for look and construction, and known suppliers, and you work within those parameters. When we started examining stand-alone products, well, things got hairy quick. But this summer's labor is beginning to bear fruit, and we will definitely be showing our new line of Audio Damage pedals at NAMM in January. We hope to show three different pedals, but that might be optimistic. This has proven to be a surprisingly difficult and time-consuming operation.

Interestingly, most of the difficulty and time consumption resulted from the fact that I just can't stand those Hammond boxes that most boutique pedals come in, and wanted our own folded steel chassis. It turns out that you need to know quite a bit of mechanical engineering to cause such a thing to be created, and since I had two years of mechanical engineering classes in high school in the 80s, of course I was up to the task. But lo, and furthermore hark! My brother-in-law works at Baer, which is (literally) right up the street from us, and he loaned me one of their engineers. Then the fine folks at Cutting Edge Manufacturing here in Phoenix took those drawings and tuned them up a bit, and then BLASTED SHEETS OF STEEL WITH A 4000 WATT LASER! (This shit is so fucking cool, I don't even.)

The first article is pictured above. These things are so tough you could drive a tank over them. I don't know about the rest of the thing, but the chassis will definitely survive the holocaust. The guts are digital, of course, but feature true bypass (done with relays), assignable expression pedal destinations, and true stereo where appropriate. I think the non-Euro folks are gonna be very pleased with these, and as we get a WORKFLOW in place to build stand-alone products, you'll start to see some more sophisticated shit, in addition to our ever-expanding Euro line."

Roland JU-06 fits nicely on the Akai MPK61


Published on Oct 31, 2015 alternatingbitmusic

"Just a brief demo of how I've mounted my JU-06"

Ambika - Sequencer Fun


Published on Oct 31, 2015 SYNTHWAY

"Just messing around with Ambika's internal sequencer. I've done a (poor) acid jam just with the Ambika, no external gear or MIDI devices used.

The sequence itself is pretty simple, and so are the sounds. I'm using the performance page on Ambika to control the bassline cutoff, envelope and resonance, and volume for the other parts. Everything is simple, I just had a little fun with it.

I'm sorry that drum parts were not the best. I'm going to use it extensively with my Volca Bass and create something a little more complex and musical.

I hope you enjoy it...

More Ambika videos to come."
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH